18 Jan, 2014
1 commit
-
findftd is currently setting fdtfile to undefined for the beagle c4, select omap3-beagle.dtb instead
Signed-off-by: Robert Nelson
17 Jan, 2014
5 commits
-
This patch enables ethernet support in ARMv8 foundation model. The ARMv8
foundation model supports a SMSC91C111 integrated MAC and PHY module
which is present at base address 0x01A000000.The previous implementation had enabled SMSC9115 ethernet controller
which is not present on the ARMv8 foundation model.Tested on ARMv8 foundation model v1 and v2 by running ping/tftp
between the foundation model and the host PC via a bridged network.Signed-off-by: Bhupesh Sharma
-
Provide default Poll Timeout value for Trats2 board.
Signed-off-by: Lukasz Majewski
Acked-by: Minkyu Kang -
Disable L2 caches for Trats and Trats2 devices.
It turns out that for data downloading with thordown command L2 cache
disablement brings a significant speed improvement.rootfs - 400 MiB:
- L2 cache enabled: 2.69 MiB/s
- L2 cache disabled: 5.56 MiB/sSuch improvement is possible due to reduction of the need to invalidate
redundant data, which resides in L2 cache.Since the sent USB request size at once is 512B (L1 - 32 KiB in total) -
one can be quite confident that it is already available in L1 and L2 can
be disabled.Signed-off-by: Lukasz Majewski
Acked-by: Minkyu Kang -
This patch adds extra dfu_alt_info entries to support storing the whole BOOT
, DATA and UMS partitions.
This allows upgrade of uImage and device tree blob (dtb) files at once.Now it is also possible to store ext4 rootfs prepared with well established
linux tools (like mkfs.ext4).Signed-off-by: Lukasz Majewski
Acked-by: Minkyu Kang
16 Jan, 2014
2 commits
-
This supports SH-QSPI device on koelsch board, and enable booting from
SPI flash.Signed-off-by: Nobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu -
This supports SH-QSPI device on lager board, and enable booting from
SPI flash.Signed-off-by: Nobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu
15 Jan, 2014
3 commits
-
SolidRun has designed the Hummingboard board based on mx6q/dl/solo.
Add the initial support for the mx6 solo variant.
More information about this hardware can be found at:
http://imx.solid-run.com/wiki/index.php?title=Carrier-One_Hardware(Carrier-One was the previous name of Hummingboard).
Based on the work from Jon Nettleton .
Signed-off-by: Jon Nettleton
Signed-off-by: Fabio Estevam
14 Jan, 2014
4 commits
-
Signed-off-by: Albert ARIBAUD
Acked-by: Stefano Babic
13 Jan, 2014
9 commits
-
Access the OneNAND 1KiB window on the VPAC270 as an SRAM instead of accessing
it as a burst-RAM. This fixes a problem where the board failed to reboot
sometimes as the CPU couldn't start executing from the OneNAND 1KiB window.Signed-off-by: Marek Vasut
Cc: Albert Aribaud
Cc: Tom Rini -
Before this change ums mode can not be entered when device
was using the same usb port for usb/uart communication.
Switching USB cable from UART to USB always causes ums exit.Signed-off-by: Przemyslaw Marczak
-
Arndale board has AX88760, which is USB 2.0 Hub & USB 2.0 Ethernet Combo
controller, connected to HSIC Phy of USB host controller via USB3503 hub.This patch uses board specific board_usb_init function to perform reset
sequence for USB3503 hub and enables the relevant config options for
network to work.Signed-off-by: Inderpal Singh
Signed-off-by: Chander Kashyap -
Include "mx6_common.h" so that some ARM errata are applied and also the
vddsoc regulator can be changed.Signed-off-by: Fabio Estevam
Acked-by: Stefano Babic -
Change the default environment to use zImage instead of uImage, this
requires changes to the default environment to load a file named
zImage instead of uImage, and to use the 'bootz' command instead of
'bootm' when booting the kernel.The zImage works for FSL Linux's kernel fork versions 3.0.35, 3.10.9,
and 3.10.17; this also works fine for mainline kernels.Signed-off-by: John Weber
Signed-off-by: Otavio Salvador -
A new 'update_emmc_firmware' target is added to allow for easy U-Boot
update in the eMMC as it has secury boot partition and this needs
specific handling on how to program the specific partition.Signed-off-by: Otavio Salvador
-
This patch added support for accessing dual memories in
parallel connection with single chipselect line from controller.For more info - see doc/SPI/README.dual-flash
Signed-off-by: Jagannadha Sutradharudu Teki
-
This patch added support for accessing dual memories in
stacked connection with single chipselect line from controller.For more info - see doc/SPI/README.dual-flash
Signed-off-by: Jagannadha Sutradharudu Teki
-
- comment typo's
- func args have a proper namesSigned-off-by: Jagannadha Sutradharudu Teki
11 Jan, 2014
5 commits
-
Discovered the read dummy_byte based on the
configured read command.Signed-off-by: Jagannadha Sutradharudu Teki
-
This patch adds support QUAD_IO_FAST read command.
Signed-off-by: Jagannadha Sutradharudu Teki
-
Moved the flash params table from sf_probe.c and
placed on to sf_params.c, hence flash params file will
alter based on new addons.Signed-off-by: Jagannadha Sutradharudu Teki
-
This patch add quad commands support like
- QUAD_PAGE_PROGRAM => for write program
- QUAD_OUTPUT_FAST ->> for read programSigned-off-by: Jagannadha Sutradharudu Teki
-
Current sf uses FAST_READ command, this patch adds support to
use the different/extended read command.This implementation will determine the fastest command by taking
the supported commands from the flash and the controller, controller
is always been a priority.Signed-off-by: Jagannadha Sutradharudu Teki
10 Jan, 2014
11 commits
-
Bringing in the MMC tree means that CONFIG_BOUNCE_BUFFER needed to be
added to include/configs/exynos5-dt.h now.Conflicts:
include/configs/exynos5250-dt.hSigned-off-by: Tom Rini
-
Enabled default dts files on respective pre-board config
files this is way MAKEALL will works. and it's upto user
to build specific dts by specifying at build time.$ make zynq_zc70x_config
$ make --> with default dts zynq-zc702.dts
or
$ make DEVICE_TREE=zynq-zc702 --> Same configuration with zynq-zc706.dtsSigned-off-by: Jagannadha Sutradharudu Teki
-
CONFIG_FIT_SIGNATURE - signature node support in FIT image
CONFIG_RSA - RSA lib supportSigned-off-by: Jagannadha Sutradharudu Teki
-
This patch provides a basic fdt support for zynq u-boot.
zynq-7000.dtsi-> initial arch dts file
zynq-zed.dts -> initial zed board dts file
more devices should be added in subsequent patches.u-boot build: once configuring of a board done
for building dtb with zynq-zed.dts as an input
zynq-uboot> make DEVICE_TREE=zynq-zedEnabled CONFIG_OF_SEPARATE for building dtb separately.
There is a new binary called u-boot-dtb.bin which is a u-boot
with devicetree supported.Signed-off-by: Jagannadha Sutradharudu Teki
-
Defined CONFIG_ENV_OVERWRITE, which allow to
overwrite serial baudrate and ethaddr.Signed-off-by: Jagannadha Sutradharudu Teki
-
Last 128Kb sector of 1Mb flash is defined as u-boot
environment partition.Signed-off-by: Jagannadha Sutradharudu Teki
-
Changed Env. Sector size from 0x10000 to 128Kb
Signed-off-by: Jagannadha Sutradharudu Teki
-
Defined default env. for autoboot FIT image from
respective boot devices.Default settings:
fit_image=fit.itb
load_addr=0x2000000
fit_size=0x800000
flash_off=0x100000
nor_flash_off=0xE2100000Signed-off-by: Jagannadha Sutradharudu Teki
-
Added support to find the bootmodes by reading
slcr bootmode register. this can be helpful to
autoboot the configurations w.r.t a specified bootmode.Added this functionality on board_late_init as it's not
needed for normal initializtion part.Signed-off-by: Jagannadha Sutradharudu Teki
-
ZC770 is a complete development board based on the Xilinx Zynq-7000
All Programmable SoC, similar to ZC70x board but which has four
different daughter cards, like XM010, XM011, XM012 and XM013ZC770 XM012:
- 1GB DDR3
- 64MiB Numonyx NOR flash
- USB-UARTSigned-off-by: Jagannadha Sutradharudu Teki
Cc: Stefan Roese -
ZC770 is a complete development board based on the Xilinx Zynq-7000
All Programmable SoC, similar to ZC70x board but which has four
different daughter cards, like XM010, XM011, XM012 and XM013ZC770 XM013:
- 1GB DDR3
- 128 Mb Quad-SPI Flash(dual parallel)
- USB-UARTSigned-off-by: Jagannadha Sutradharudu Teki
