16 Jun, 2017
1 commit
-
There was for long time no activity in the mpx5xxx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in mpc5xxx,
so remove it.Signed-off-by: Heiko Schocher
12 Jun, 2017
1 commit
-
There was for long time no activity in the 8xx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in 8xx,
so remove it (with a heavy heart, knowing that I remove
here the root of U-Boot).Signed-off-by: Heiko Schocher
22 Jan, 2017
1 commit
-
Move all of the status LED feature to drivers/led/Kconfig.
The LED status definitions were moved from the board configuration
files to the defconfig files.TBD: Move all of the definitions in the include/status_led.h to the
relevant board's defconfig files.Tested boards: CL-SOM-AM57x, CM-T335
Signed-off-by: Uri Mashiach
25 Oct, 2015
1 commit
-
For current U-Boot to initialize status LEDs via status_led_init(), it
is required to have both CONFIG_STATUS_LED and STATUS_LED_BOOT defined.
This may be a particular concern with GPIO LEDs, where __led_init() is
required to correctly set up the GPIO (gpio_request and
gpio_direction_output). Without STATUS_LED_BOOT the initialization isn't
called, which could leave the user with a non-functional "led" command -
due to the fact that the LED routines in gpio_led.c use gpio_set_value()
just fine, but the GPIO never got set up properly in the first place.I think having CONFIG_STATUS_LED is sufficient to justify a
corresponding call to status_led_init(), even with no STATUS_LED_BOOT
defined. To do so, common/board_r.c needs call that routine, so it now
is exposed via status_led.h.Signed-off-by: Bernhard Nortmann
[trini: Add dummy __led_init to pca9551_led.c]
Signed-off-by: Tom Rini
02 Sep, 2015
1 commit
-
This has not been converted to Generic Board, so should be removed.
(See doc/README.generic-board for details.)Signed-off-by: Masahiro Yamada
23 Apr, 2015
1 commit
-
This patch extends the U-Boot "led" command to support automatic blinking
by setting a blink frequency in milliseconds. Additionally the number of
supported LEDs is increased to 6 (0...5).This will be used by the PCA9551 LED driver.
Signed-off-by: Stefan Roese
Reviewed-by: Tom Rini
06 Jan, 2015
3 commits
-
This board is still a non-generic board.
Signed-off-by: Masahiro Yamada
Cc: Wolfgang Denk -
This board is still a non-generic board.
Signed-off-by: Masahiro Yamada
Cc: Pantelis Antoniou -
These boards are still non-generic boards.
Signed-off-by: Masahiro Yamada
Cc: Klaus Heydeck
27 Oct, 2014
1 commit
-
This board is the only user of CONFIG_SYS_EEPROM_X40430 , remove
it so the EEPROM command code can be cleansed of the related code
as well.Signed-off-by: Marek Vasut
Cc: Masahiro Yamada
Cc: Tom Rini
Cc: Wolfgang Denk
Cc: Simon Glass
Cc: Heiko Schocher
22 Aug, 2014
3 commits
-
These boards have been orphaned for a while and old enough.
Signed-off-by: Masahiro Yamada
-
This board has been orphaned for a while and old enough.
Signed-off-by: Masahiro Yamada
-
This board has been orphaned for a while and old enough.
Signed-off-by: Masahiro Yamada
19 Jul, 2014
1 commit
-
First of all this looks a lot better, but it also
prevents a gcc warning (W=1), that the weak function
has no previous prototype.cc: Simon Glass
Signed-off-by: Jeroen Hofstee
Acked-by: Simon Glass
08 Jul, 2014
2 commits
-
These boards are old enough and have no maintainers.
Signed-off-by: Masahiro Yamada
-
This board is old enough and has no maintainer.
Signed-off-by: Masahiro Yamada
24 Jul, 2013
1 commit
-
Signed-off-by: Wolfgang Denk
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini
10 Nov, 2012
1 commit
-
The file has a wrong inline keyword of __led_toggle(), which causes
compilation error. And its content is defined in common status_led.h.
So define CONFIG_BOARD_SPECIFIC_LED in board config files and remove
this header file.Signed-off-by: Thomas Chou
29 Oct, 2012
1 commit
-
These boards have long reached EOL, and there has been no indication
of any active users of such hardware for years. Get rid of the dead
weight.Signed-off-by: Wolfgang Denk
Cc: Wolfgang Grandegger
02 Oct, 2011
1 commit
-
The EST SBC8260 is over 10 years old, and the SBC8240 older than
that. With the tiny amount of RAM (by today's standards), there
really isn't anyone interested in running the latest U-boot on
these EOL products anymore.Signed-off-by: Paul Gortmaker
CC: jon.diekema@smiths-aerospace.com
13 Sep, 2011
1 commit
-
Result of running the following command to address Wolfgang's
comment about camel case:for file in `find . | grep '\.[chS]$'`; do perl -i -pe
's/(green|yellow|red|blue)_LED_(on|off)/$1_led_$2/g' $file; doneDiscussion:
http://patchwork.ozlabs.org/patch/84988/Signed-off-by: Jason Kridner
Signed-off-by: Joel A Fernandes
Signed-off-by: Sandeep Paulraj
07 Oct, 2010
2 commits
-
The CCM board has long reached EOL, and support for it is no longer
relevant in current versions of U-Boot. Remove it.Signed-off-by: Wolfgang Denk
-
The PCU_E board has long reached EOL, and support for it is no longer
relevant in current versions of U-Boot. Remove it.Signed-off-by: Wolfgang Denk
20 Sep, 2010
1 commit
-
Recent changes caused that the HMI10 board now is included in the
boards built by MAKEALL, which revealed that compilation for this
board has been broken for a long time:ps2ser.c: In function 'ps2ser_init':
ps2ser.c:155: error: 'UART_LCR' undeclared (first use in this function)
ps2ser.c:155: error: (Each undeclared identifier is reported only once
ps2ser.c:155: error: for each function it appears in.)
ps2ser.c:156: error: 'UART_DLL' undeclared (first use in this function)
ps2ser.c:157: error: 'UART_DLM' undeclared (first use in this function)
ps2ser.c:159: error: 'UART_IER' undeclared (first use in this function)
ps2ser.c:160: error: 'UART_MCR' undeclared (first use in this function)
ps2ser.c:161: error: 'UART_FCR' undeclared (first use in this function)
ps2ser.c:162: error: 'UART_FCR_ENABLE_FIFO' undeclared (first use in this function)
ps2ser.c:166: error: 'UART_LSR' undeclared (first use in this function)
ps2ser.c: In function 'ps2ser_putc':
ps2ser.c:198: error: 'UART_LSR' undeclared (first use in this function)
ps2ser.c:200: error: 'UART_TX' undeclared (first use in this function)
ps2ser.c: In function 'ps2ser_getc_hw':
ps2ser.c:224: error: 'UART_LSR' undeclared (first use in this function)
ps2ser.c:225: error: 'UART_RX' undeclared (first use in this function)
ps2ser.c: In function 'ps2ser_interrupt':
ps2ser.c:293: error: 'UART_IIR' undeclared (first use in this function)The board is orphaned, and AFAICT has reached EOL.
Drop support for it.Signed-off-by: Wolfgang Denk
05 Jul, 2010
1 commit
-
When boards define CONFIG_BOARD_SPECIFIC_LED, the common led definitions
are OK for Blackfin boards. So switch the few boards using these over to
the common code.Signed-off-by: Mike Frysinger
13 Jun, 2009
1 commit
-
There is exiting support for red,yellow,green but no blue.
The main LED on the zoom2 is a blue LED.Signed-off-by: Tom Rix
29 Jan, 2009
1 commit
-
Here are the Blackfin-specific and board-independent pieces for status leds.
Signed-off-by: Mike Frysinger
19 Oct, 2008
1 commit
-
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD
14 Oct, 2007
1 commit
-
Signed-off-by: Wolfgang Denk
18 Sep, 2007
1 commit
-
Improve indentation in drivers/at45.c
23 Jun, 2007
1 commit
-
- Show on the Status LEDs, some States of the board.
- Get the MAC addresses from the EEProm
- use PREBOOT
- use the CF on the board.
- check the U-Boot image in the Flash with a SHA1
checksum.
- use dynamic TLB entries generation for the SDRAMSigned-off-by: Heiko Schocher
27 May, 2007
1 commit
-
Signed-off-by: Jan Wrobel
Signed-off-by: Marian Balakowicz
Acked-by: Bartlomiej Sieka
14 Oct, 2006
1 commit
15 Aug, 2005
1 commit
-
Patch by Dan Malek and Pantelis Antoniou, 15 Aug 2005
11 Oct, 2004
1 commit
-
- Add support for Altera Nios-II processors.
- Add support for Psyent PCI-5441 board.
- Add support for Psyent PK1C20 board.
11 Jul, 2004
1 commit
-
* Patch by Daniel Poirot, 24 Jun 2004:
Add support for Wind River's sbc8240 board* Patches by Yasushi Shoji, 26 Jun 2004:
- drivers/serial_xuartlite.c: fix "return 0" in void function
- add microblaze support to mkimage tool
08 Jun, 2004
1 commit
-
- Intracom board update.
- Add Codec POST.
16 Apr, 2004
1 commit
-
- add auto-complete support to the U-Boot CLI
- add support for NETTA and NETPHONE boards; fix NETVIA board* Patch by Yuli Barcohen, 28 Mar 2004:
- Add support for MPC8272 family including MPC8247/8248/8271/8272
- Add support for MPC8272ADS evaluation board (another flavour of MPC8260ADS)
- Change configuration method for MPC8260ADS family
26 Mar, 2004
1 commit
-
Add support for KUP4X Board
14 Mar, 2004
1 commit
-
- Added LBA48 support (CONFIG_LBA48 & CFG_64BIT_LBA)
- Added support for 64bit printing in vsprintf (CFG_64BIT_VSPRINTF)
- Added support for 64bit strtoul (CFG_64BIT_STRTOUL)* Patch by Masami Komiya, 27 Feb 2004:
Fix rarpboot: add autoload by NFS* Patch by Dan Eisenhut, 26 Feb 2004:
fix flash_write return value in saveenv* Patch by Stephan Linz, 11 Dec 2003
expand config.mk to avoid trigraph warnings on NIOS* Rename "BMS2003" board into "HMI10"