21 Oct, 2014
5 commits
-
Signed-off-by: Christian Gmeiner
Reviewed-by: Masahiro Yamada -
Declare displays[] and display_count in imx-common/video.h to
prevent "Should it be static?" messages when compiling board
files with "make C=1".Signed-off-by: Eric Nelson
-
Provide a public declaration of the board_spi_cs_gpio()
callback for i.MX SPI chip selects to prevent the warning
"Should it be static?" when compiling with "make C=1".Signed-off-by: Eric Nelson
-
Include to see the prototype for get_board_rev()
and prevent warning "Should it be static?" with "make C=1".Signed-off-by: Eric Nelson
-
Without preceding declarations, "make C=1" generates
"Should it be static?" warnings for symbols
do_bootm_linux,
boot_prep_vxworks, and
boot_jump_vxworksInclude of bootm.h also identified a signature mismatch
(const on argv[]).Signed-off-by: Eric Nelson
Acked-by: Albert ARIBAUD
14 Oct, 2014
1 commit
-
Signed-off-by: Tom Rini
13 Oct, 2014
2 commits
-
Currently uboot wrongly uses 25mV / step for dcdc3, this is a copy and paste
error introduced when adding the axp152_mvolt_to_target during review of the
axp152.c driver. This results in u-boot setting Vddr to 2.3V instead of 1.5V.This commit fixes this.
Signed-off-by: Hans de Goede
-
With the introduction of CONFIG_LOCALVERSION support we cannot build
tools without having a config file (as we won't know our PLAIN_VERSION
until then).Reported-by: Otavio Salvador
Signed-off-by: Tom Rini
11 Oct, 2014
13 commits
-
The SoCDK uses EMAC1, not EMAC0. This patch fixes the issue.
Signed-off-by: Marek Vasut
Cc: Chin Liang See
Cc: Dinh Nguyen
Cc: Albert Aribaud
Cc: Tom Rini
Cc: Wolfgang Denk
Cc: Pavel Machek -
Add MAINTAINERS entry.
Signed-off-by: Pavel Machek
Cc: Chin Liang See
Cc: Dinh Nguyen
Cc: Albert Aribaud
Cc: Tom Rini
Cc: Wolfgang Denk
Cc: Pavel Machek -
Commit 832472 "tools: socfpga: Add socfpga preloader signing
to mkimage" added tools/socfpga.c which relies on htole32,
le32toh and friends. While compiler.h includes these protypes
for linux from endian.h, it doesn't do so for FreeBSD. Hence
include for FreeBSD.Cc: Marek Vasut
CC: Tom Rini
Signed-off-by: Jeroen Hofstee -
Signed-off-by: Heiko Schocher
Cc: Andreas Bießmann
Cc: Bo Shen
Signed-off-by: Andreas Bießmann -
Signed-off-by: Bo Shen
Signed-off-by: Andreas Bießmann -
Signed-off-by: Andreas Bießmann
Cc: Bo Shen -
Signed-off-by: Andreas Bießmann
Cc: Joe Hershberger
Cc: Bo Shen -
Signed-off-by: Hans de Goede
-
Update readme file for Keystone II EVM boards to actual sources.
Also correct some typos. For now the Edison evaluation board is
added, README for K2E is mostly the same, so update README to
contain information also for K2E evm. Rename file to README as
it contains information for all keystone evm boards.Signed-off-by: Ivan Khoronzhuk
-
The K2HK and K2E boards support SPL by default, so add
CONFIG_SPL option. Also export CONFIG_ARM, CONFIG_ARCH_KEYSTONE
and TARGET_K2*_EVM options to spl/.config as they are the same.
So now it's convinient to build gph images using only two commands:make k2hk_evm_defconfig
make u-boot-spi.gphAcked-By: Murali Karicheri
Signed-off-by: Murali Karicheri
Signed-off-by: Ivan Khoronzhuk
10 Oct, 2014
19 commits
-
We need to set the 'BE' flag here for things to work right.
Signed-off-by: Tom Rini
-
Since on powerpc phys_size_t can be unsigned long long, this printout
line can result in a not nice compile warning.Signed-off-by: Valentin Longchamp
Acked-by: Simon Glass -
The lines COL (collision detect) and CRS (carrier sense) needs to be connected
and muxed to the CPSW MAC for a proper function in half-duplex Mode of the
interface.Signed-off-by: Hannes Petermaier
Cc: Tom Rini -
Fix the spelling of "configs".
Signed-off-by: York Sun
CC: Masahiro Yamada
Acked-by: Masahiro Yamada -
A SPL/TPL enabled target would was not recognized as
such by BSD sed, since it relies on a GNU extension.
Instead of or-ing just spell out both matches.Cc: Masahiro Yamada
Signed-off-by: Jeroen Hofstee
Acked-by: Masahiro Yamada -
remove the seldomly used EXT2 support because the U-Boot binary will
not fit into the 512KiB flash otherwise.Signed-off-by: David Müller
-
fix broken SPI access by adding/activating BOARD_EARLY_INIT_F
functionality and calling spi_init_f() from there.Signed-off-by: David Müller
-
Signed-off-by: David Müller
-
Signed-off-by: David Müller
-
Signed-off-by: David Müller
-
Signed-off-by: David Müller
-
A number of network related files were imported from the LiMon
project; these contain a somewhat unclear license statement:Copyright 1994 - 2000 Neil Russell.
(See License)I analyzed the source code of LiMon v1.4.2 which was used for this
import. It does not contain any "License" file, but the top level
directory contains a file "COPYING", which turns out to be GPL v2
of June 1991. So it is legitimate to conclude that the LiMon derived
files are also to be released under GPLv2. Mark them as such.Signed-off-by: Wolfgang Denk
-
Fix typo of commit d4e53f063dd25e071444b87303573e7440deeb89.
i2c2 pullup resisters are controlled by bit 0 of CONTROL_PROG_IO1.
It's value after reset is 0x00100001.In order to clear bit 0, original code write 0xfffffffe to
CONTROL_PROG_IO1 and toggle almost all default values.Original code affect following:
* disable i2c1 pullup resisters
* increase far end load setting for many modules
* setup invalid SC/LB combinationSigned-off-by: Alexander Kochetkov
CC: Tom Rini
CC: Steve Kipisz -
These boards have been orphaned for more than 6 months.
Signed-off-by: Masahiro Yamada
-
These boards have been orphaned for more than 6 months.
Signed-off-by: Masahiro Yamada
-
This board has been orphaned for more than 6 months.
It is the last board defining CONFIG_APM821XX.
The code inside #ifdef CONFIG_APM821XX should be removed too.Signed-off-by: Masahiro Yamada
-
This board has been orphaned for more than 6 months.
Signed-off-by: Masahiro Yamada
-
These boards have been orphaned for more than 6 months.
Signed-off-by: Masahiro Yamada
