08 Jul, 2014
4 commits
-
Signed-off-by: Dirk Eibach
-
Signed-off-by: Dirk Eibach
-
IHS I2C master support was merely a hack in the osd driver.
Now it is a proper u-boot I2C framework driver, supporting the
v2.00 master features.Signed-off-by: Dirk Eibach
-
There is a new iocon hardware flavor, supporting DisplayPort finally.
Signed-off-by: Dirk Eibach
19 Jun, 2014
1 commit
-
This is a MIME GnuPG-signed message. If you see this text, it means that
your E-mail or Usenet software does not support MIME signed messages.
The Internet standard for MIME PGP messages, RFC 2015, was published in 1996.
To open this message correctly you will need to install E-mail or Usenet
software that supports modern Internet standards.Revert changes in iocon.h config file caused by
these two commits:
"configs: iocom: Fix typo on CMD_FPGA command"
(sha1: d0db28f94034ef02c1d6737895766fb3c19de47f)
and
"fpga: Guard the LOADMK functionality with CMD_FPGA_LOADMK"
(sha1: 64e809afeaf1572c3246a5bca198a77d0498fd89)CONFIG_CMD_FPGAD is own command.
Reported-by: Dirk Eibach
Signed-off-by: Michal Simek
20 May, 2014
2 commits
-
Guard the LOADMK functionality with config to provide
an option to enable or disable it.
Enable it for all platforms in mainline which enable CONFIG_CMD_FPGA.Signed-off-by: Siva Durga Prasad Paladugu
Signed-off-by: Michal Simek -
Fix typo in CMD_FPGA command enabling.
Signed-off-by: Michal Simek
20 Feb, 2014
1 commit
-
CONFIG_SYS_GBL_DATA_SIZE is not used any more.
The size of struct "global_data" is automatically calculated
by asm-offsets. (See lib/asm-offsets.c)GENERATED_GBL_DATA_SIZE should be used instead of
CONFIG_SYS_GBL_DATA_SIZE.Signed-off-by: Masahiro Yamada
25 Jan, 2014
1 commit
-
We do not have to define CONFIG_4xx in board config headers
because it is defined in arch/powerpc/cpu/ppc4xx/config.mk.include/configs/JSE.h defines "CONFIG_4x", not "CONFIG_4xx".
I believe it is a typo because "CONFIG_4x" is not used at all
in other files.
So, I also deleted "CONFIG_4x" in include/configs/JSE.h.Signed-off-by: Masahiro Yamada
15 Oct, 2013
1 commit
-
Signed-off-by: Wolfgang Denk
26 Jul, 2013
3 commits
-
CONFIG_SYS_FLASH_PROTECTION was active on most gdsys boards by default,
while hardware flash protection was not implemented.
Hardware support was added recently and we get into trouble because backward
compatibility is broken (u-boot can't unprotect the protected flash after a
downgrade). So we decided to disable hardware flash protection for all our boards.Signed-off-by: Dirk Eibach
Signed-off-by: Stefan Roese -
Signed-off-by: Dirk Eibach
Signed-off-by: Stefan Roese -
A set of accessor functions was added to be able to access not only
memory mapped FPGA in a generic way.Thanks to Wolfgang Denk for getting this sorted properly.
Signed-off-by: Dirk Eibach
Signed-off-by: Stefan Roese
24 Jul, 2013
2 commits
-
The sandburst-specific i2c drivers have been deleted, conflict was just
over the SPDX conversion.Conflicts:
board/sandburst/common/ppc440gx_i2c.c
board/sandburst/common/ppc440gx_i2c.hSigned-off-by: Tom Rini
-
Signed-off-by: Wolfgang Denk
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini
23 Jul, 2013
2 commits
-
Signed-off-by: Dirk Eibach
Cc: Heiko Schocher
Cc: Stefan Roese
Tested-by: Stefan Roese -
- added to soft_i2c driver new multibus/multiadpater support
- adapted all config files, which uses this driverSigned-off-by: Heiko Schocher
Cc: Simon Glass
Cc: Stephen Warren
30 Apr, 2012
2 commits
-
Signed-off-by: Dirk Eibach
Cc: Stefan Roese
Signed-off-by: Stefan Roese -
In order to add boards that have different hardware for fpga reset,
any 405ep gdsys board now provides these functions:void gd405ep_init(void);
void gd405ep_set_fpga_reset(unsigned state);
void gd405ep_setup_hw(void);
int gd405ep_get_fpga_done(unsigned fpga);Signed-off-by: Dirk Eibach
Cc: Stefan Roese
Signed-off-by: Stefan Roese
07 Feb, 2011
1 commit
-
Board support for the Guntermann & Drunck DLVision-10G.
Adds support for multiple FPGAs per board for gdsys 405ep
architecture.
Adds support for dual link osd hardware for gdsys 405ep.Signed-off-by: Dirk Eibach
Signed-off-by: Stefan Roese
25 Oct, 2010
1 commit
-
Board support for the Guntermann & Drunck CATCenter Io.
Board support for the Guntermann & Drunck IoCon.Signed-off-by: Dirk Eibach
Signed-off-by: Stefan Roese