04 Dec, 2017
1 commit
-
This header was renamed to rawnand.h in Linux.
The following is the corresponding commit in Linux.
commit d4092d76a4a4e57b65910899948a83cc8646c5a5
Author: Boris Brezillon
Date: Fri Aug 4 17:29:10 2017 +0200mtd: nand: Rename nand.h into rawnand.h
We are planning to share more code between different NAND based
devices (SPI NAND, OneNAND and raw NANDs), but before doing that
we need to move the existing include/linux/mtd/nand.h file into
include/linux/mtd/rawnand.h so we can later create a nand.h header
containing all common structure and function prototypes.Signed-off-by: Masahiro Yamada
15 Sep, 2017
1 commit
-
To remove the assignment of CONFIG_SYS_EXTRA_OPTIONS option,
which is deprecated, use the CONFIG_XXXX_BOOT options to
indicate the boot media, and the SoC is selected by the board.Signed-off-by: Wenyou Yang
12 Jul, 2017
1 commit
-
As part of preparation for nand DM conversion the new API has been
introduced to remove direct access to nand_info array. So, use it here
instead of accessing to nand_info array directly.Signed-off-by: Grygorii Strashko
05 Jun, 2017
1 commit
-
Rather than relying on common.h to provide this include, which is going
away at some point, include it explicitly in each file.Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
10 May, 2017
2 commits
-
Enable the early debug UART to debug problems when an ICE or other
debug mechanism is not available.Signed-off-by: Wenyou Yang
Reviewed-by: Simon Glass -
Since the introduction of the pinctrl and clk drivers and the
device tree files, remove unneeded hard coded related code from
the board file.Signed-off-by: Wenyou Yang
Reviewed-by: Simon Glass
04 Jun, 2016
1 commit
-
nand_info[] is now an array of pointers, with the actual mtd_info
instance embedded in struct nand_chip.This is in preparation for syncing the NAND code with Linux 4.6,
which makes the same change to struct nand_chip. It's in a separate
commit due to the large amount of changes required to accommodate the
change to nand_info[].Signed-off-by: Scott Wood
19 Feb, 2016
1 commit
-
Due to introducing the new peripheral clock handle functions,
use these functions to reduce duplicated code.Signed-off-by: Wenyou Yang
Tested-by: Heiko Schocher
[Rebased on current master, fixup for at91rm9200ek]
Signed-off-by: Andreas Bießmann
02 Feb, 2016
1 commit
-
Add struct atmel_mpddrc_config to accommodate the mpddrc register
configurations, not using the mpddrc register map structure,
struct atmel_mpddrc, in order to increase readability and reduce
run-time memory use.Signed-off-by: Wenyou Yang
Reviewed-by: Andreas Bießmann
21 Aug, 2015
3 commits
-
To enable the clocks on the at91 boards a constant (0x4) is used.
This is replaced with a define in at91_pmc.h (1 << 2).Signed-off-by: Erik van Luijk
Reviewed-by: Andreas Bießmann -
On these boards the DDR is connected to a dedicated controller and not
to chip select 1 of the EBI.Signed-off-by: Erik van Luijk
Tested-by: Erik van Luijk -
The mpddr.c depends on ATMEL_BASE_MPDDRC for the base address to configure the controller.
This cannot be used when there is more than one controller (i.e. AT91SAM9G45, AT91SAM9M10).Signed-off-by: Erik van Luijk
[remove 'new blank line at EOF']
Signed-off-by: Andreas Bießmann
01 Apr, 2015
1 commit
-
Supports boot up from NAND flash with software ECC eanbled.
And supports boot up from SD/MMC card with FAT file system.As the boot from SD/MMC card with FAT file system, the BSS
segment is too big to fit into SRAM, so, use the lds to put
it into SDRAM.Signed-off-by: Bo Shen
12 Jun, 2014
1 commit
-
This prevents some warnings when building with clang.
cc:: andreas.devel@googlemail.com
Signed-off-by: Jeroen Hofstee
27 May, 2014
1 commit
-
Also we enable the mmc command in configuration file.
As both CONFIG_CMD_MMC and CONFIG_CMD_USB use the CONFIG_DOS_PARTITION,
so remove the redundant CONFIG_DOS_PARTITION definition.Signed-off-by: Josh Wu
Signed-off-by: Andreas Bießmann
02 Dec, 2013
1 commit
-
add common phy reset code into a common function.
Signed-off-by: Heiko Schocher
Cc: Andreas Bießmann
Cc: Bo Shen
Cc: Jens Scharsig
Cc: Sergey Lapin
Cc: Stelian Pop
Cc: Albin Tonnerre
Cc: Eric Benard
Cc: Markus Hubig
Acked-by: Jens Scharsig (BuS Elektronik)
Tested-by: Jens Scharsig (BuS Elektronik)
Tested-by: Bo Shen
Acked-by: Bo Shen
Signed-off-by: Andreas Bießmann
24 Jul, 2013
1 commit
-
Signed-off-by: Wolfgang Denk
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini
01 Sep, 2012
1 commit
-
A lot of at91 boards have the console_init_f in board_init. This is useless
cause it was called before by generic code in lib/board.c.Signed-off-by: Andreas Bießmann
cc: Jens Scharsig
cc: Stelian Pop
cc: Sedji Gaouaou
cc: Albin Tonnerre
cc: Eric Benard
Tested-by: voice.shen@atmel.com
Tested-by: voice.shen@atmel.com
Acked-by: Jens Scharsig (BuS Elektronik)
Tested-by: Jens Scharsig (BuS Elektronik)
29 Nov, 2011
1 commit
-
Change my old email address which is no longer valid.
Signed-off-by: Stelian Pop
Signed-off-by: Anatolij Gustschin
04 Sep, 2011
1 commit
-
Based on earlier work by Alex Waterman .
Signed-off-by: Thomas Petazzoni
12 Jul, 2010
1 commit
-
Also, remove all calls to eth_init() in boards that use MACB
Signed-off-by: Ben Warren
01 Jul, 2010
1 commit
-
Add USB OHCI support for at91sam9g45ekes/at91sam9m10g45ek boards.
Note that according to errata from Atmel, OHCI is not operational
on the first revision of at91sam9g45 chip. So this patch enables
OHCI support for later revisions.Signed-off-by: Sergey Matyukevich
08 Mar, 2010
1 commit
-
Configuration defines should be preceeded with CONFIG_SYS_. Renamed
some at91 specific defines to conform to this naming convention:AT91_CPU_NAME to CONFIG_SYS_AT91_CPU_NAME
AT91_MAIN_CLOCK to CONFIG_SYS_AT91_MAIN_CLOCKSigned-off-by: Achim Ehrlich
12 Jul, 2009
1 commit
-
AT91sam9g45 series is an ARM 926ej-s SOC family clocked at 400/133MHz.
It embeds USB high speed host and device, LCD, DDR2 RAM, and a full set of
peripherals.The first board that embeds at91sam9g45 chip is the AT91SAM9G45-EKES.
On the board you can find 2 USART, USB high speed,
a 480*272 LG lcd, ethernet, gpio/joystick/buttons.Signed-off-by: Sedji Gaouaou
