18 Apr, 2014
1 commit
-
Enough time has passed since this board was moved to Orphan. Remove.
- Remove board/mousse/*
- Remove include/configs/MOUSSE.h
- Clean-up defined(CONFIG_MOUSSE)
- Move the entry from boards.cfg to doc/README.scrapyardSigned-off-by: Masahiro Yamada
12 Nov, 2013
1 commit
-
The MPC824x processors have long reached EOL, and the PN62 board has
not seen any board-specific updates for more than a decade. It is now
causing build issues. Instead of wasting time on things nobody is
interested in any more, we rather drop this board.Signed-off-by: Wolfgang Denk
Cc: Wolfgang Grandegger
cc: Tom Rini
22 Jun, 2013
1 commit
-
This patch adds support for the Palm Treo 680 smartphone. A quick overview of
u-boot implementation on the treo 680...The treo 680 has a Diskonchip G4 nand flash chip. This device has a 2k region
that maps to the system bus at the reset vector in a NOR-like fashion so that it
can be used as the boot device. The phone is shipped with this 2k region
configured as write-protected (can't be modified) and programmed with an initial
program loader (IPL). At power-up, this IPL loads the contents of two flash
blocks to SDRAM and jumps to it. The capacity of the two blocks is not large
enough to hold all of u-boot, so a u-boot SPL is used. To conserve flash space,
these two blocks and the necessary number of subsequent blocks are programmed
with a concatenated spl + u-boot image. That way, the IPL will also load a
portion of u-boot proper, and when the spl runs, it relocates the portion of
u-boot that the IPL has already loaded, and then resumes loading the remaining
part of u-boot before jumping to it.The default_environment is used (CONFIG_ENV_IS_NOWHERE) because I didn't think
that having a writable environment was worth the cost of a flash block, although
adding it would be straightforward. I abuse the CONFIG_EXTRA_ENV_SETTINGS
option to specify the usbtty for the console (CONFIG_SYS_CONSOLE_IS_IN_ENV).Support for the LCD is included, but currently it is only useful for displaying
the u-boot splash screen. But if u-boot is built without the usbtty console, it
does display the auto-boot progress nicely.Signed-off-by: Mike Dunn
27 Oct, 2012
1 commit
-
This stuff has been rotting in the tree for a year now. Remove it.
Signed-off-by: Marek Vasut
01 Sep, 2012
1 commit
-
Signed-off-by: Wolfgang Denk
09 Dec, 2011
1 commit
-
The BAB7xx boards are almost deceased. They cause build warnings, an
it's not worth the effort to fix these. Remove the dead body.Signed-off-by: Wolfgang Denk
Cc: Frank Gottschling
29 Nov, 2011
1 commit
-
Change my old email address which is no longer valid.
Signed-off-by: Stelian Pop
Signed-off-by: Anatolij Gustschin
08 Sep, 2011
2 commits
-
Signed-off-by: Wolfgang Denk
Cc: Albert ARIBAUD
Cc: Thomas Elste -
Signed-off-by: Wolfgang Denk
Cc: Albert ARIBAUD
Cc: Curt Brune
29 Jul, 2011
1 commit
-
Signed-off-by: Niklaus Giger
27 Nov, 2010
2 commits
-
The barco board appears to be unmaintained since it was added about 5
years ago. The environment location has probably never been correct.
Drop it.Signed-off-by: Wolfgang Denk
Cc: Marc Leeman
Acked-by: Stefan Roese -
The ERIC board appears to be unmaintained for more than 9 years. The
environment location has probably never been correct, and has been
definitely broken since for at least a year. Drop it.Signed-off-by: Wolfgang Denk
Cc: Stefan Roese
Cc: Swen Anderson
Acked-by: Stefan Roese
19 Oct, 2010
1 commit
-
The logodl board has long been unmaintained and left broken.
As obviously nobody is interestedin that code any more, we may as well
remove it.Signed-off-by: Wolfgang Denk
Cc: August Hoeraendl
Cc: Robert Schwebel
Cc: Marek Vasut
10 Apr, 2010
1 commit
-
Signed-off-by: Andre Schwarz
25 Mar, 2010
1 commit
-
Mercury-EP2500.patch
- added Mercury's EP2500 board uses the mcf5282 processorCREDITS.patch
Signed-off-by: David Wu
Signed-off-by: Michael Durrant
16 May, 2009
1 commit
-
Signed-off-by: Detlev Zundel
24 Oct, 2008
1 commit
-
As "ppc44x: Unification of virtex5 pp440 boards" did for the xilinx
ppc440 boards, this patch presents a common architecture for all the
xilinx ppc405 boards.Any custom xilinx ppc405 board can be added very easily with no code
duplicity.This patch also adds a simple generic board, that can be used on almost
any design with xilinx ppc405 replacing the file ppc405-generic/xparameters.hThis patch is prepared to work with the latest version of EDK (10.1)
Signed-off-by: Ricardo Ribalda Delgado
Signed-off-by: Stefan Roese
05 Sep, 2008
1 commit
-
This patch provides an unificated way of handling xilinx v5 ppc440 boards.
It unificates 3 different things:
1) Source code
A new board called ppc440-generic has been created. This board includes
a generic tlb initialization (Maps the whole memory into virtual) and
defines board_pre_init, checkboard, initdram and get_sys_info weakly,
so, they can be replaced by specific functions.If a new board needs to redefine any of the previous functions
(specific initialization) it can create a new directory with the
specific initializations needed. (see the example ml507 board).2) Configuration file
Common configurations are located under configs/xilinx-ppc440.h, this
header file interpretes the xparameters file generated by EDK and
configurates u-boot in correspondence. Example: if there is a Temac,
allows CMD_CONFIG_NET
Specific configuration are located under specific configuration file.
(see the example ml507 board)3) Makefile
Some work has been done in order to not duplicate work in the Main
Makefile. Please see the attached code.In order to support new boards they can be implemented in the next way:
a) Simple Generic Board (90% of the time)
Using EDK generates a new xparameters.h file, replace
ppc440-generic/xparameters.h and run make xilinx-ppc440-generic_config
&& makeb) Simple Boards with special u-boot parameters (9 % of the time)
Create a new file under configs for it (use ml507.h as example) and
change your paramaters. Create a new Makefile paragraph and compilec) Complex boards (1% of the time)
Create a new folder for the board, like the ml507Finally, it adds support for the Avnet FX30T Evaluation board, following
the new generic structure:Cheap board by Avnet for evaluating the Virtex5 FX technology.
This patch adds support for:
- UartLite
- 16MB Flash
- 64MB RAMPrior using U-boot in this board, read carefully the ERRATA by Avnet
to solve some memory initialization issues.Signed-off-by: Ricardo Ribalda Delgado
Signed-off-by: Stefan Roese
20 Aug, 2008
2 commits
-
Conflicts:
MAINTAINERS
-
The MIMC200 board is based on Atmel's NGW100 dev kit, but with an extra
8MByte FLASH and 128KByte FRAM.Signed-off-by: Mark Jackson
Signed-off-by: Haavard Skinnemoen
18 Jul, 2008
1 commit
-
The Xilinx ML507 Board is a Virtex 5 prototyping board that includes,
among others:
-Virtex 5 FX FPGA (With a ppc440x5 in it)
-256MB of SDRAM2
-32MB of Flash
-I2C Eeprom
-System ACE chip
-Serial ATA connectors
-RS232 Level Conversors
-Ethernet TransceiverThis patch gives support to a standard design produced by EDK for this
board: ppc440, uartlite, xilinx_int and flash- Includes Changes propossed by Stefan Roese and Michal Simek
Signed-off-by: Ricardo Ribalda Delgado
Acked-by: Stefan Roese
16 Jul, 2008
1 commit
-
The MVBC_P is a MPC5200B based camera system with Intel Gigabit ethernet
controller (using e1000) and custom Altera Cyclone-II FPGA on PCI.Signed-off-by: Andre Schwarz
Signed-off-by: Grant Likely
10 Jul, 2008
1 commit
-
ARM: Fix for incorrect version of patch applied when
adding support for the Lyrtech SFF-SDR board.Signed-off-by: Hugo Villeneuve
Signed-off-by: Philip Balister, OpenSDR
11 Jun, 2008
1 commit
-
Add MPC8343 based board mvBlueLYNX-M7.
It's a single board stereo camera system.
Please read doc/README.mvblm7 for details.Signed-off-by: Andre Schwarz
Signed-off-by: Kim Phillips
08 Apr, 2008
1 commit
01 Apr, 2008
1 commit
-
Signed-off-by: Matthew Fettke
Signed-off-by: TsiChung Liew
Acked-by: John Rigby
28 Mar, 2008
1 commit
-
Signed-off-by: Mark Jonas
Signed-off-by: Nobuhiro Iwamatsu
24 Feb, 2008
1 commit
-
Signed-off-by: Wolfgang Denk
15 Feb, 2008
1 commit
14 Feb, 2008
2 commits
-
Kimmo Leppala / Sysart and
Timo Tuunainen / Sysart -
Signed-off-by: Stelian Pop
18 Jan, 2008
1 commit
-
Signed-off-by: TsiChungLiew
Signed-off by: John Rigby
17 Jan, 2008
1 commit
-
The features list:
- Boot from NOR Flash
- DDR2 266MHz hardcoded configuration
- Local bus NOR Flash R/W operation
- I2C, UART, MII and RTC
- eTSEC0/1 support
- PCI hostSigned-off-by: Dave Liu
Signed-off-by: Kim Phillips
08 Jan, 2008
1 commit
-
update the CREDITS and MAINTAINERS.
Signed-off-by: Dave Liu
23 Sep, 2007
1 commit
-
Conflicts:
CREDITS
18 Aug, 2007
2 commits
-
Signed-off-by: Stefan Roese
-
Signed-off-by: TsiChungLiew
17 Aug, 2007
2 commits
-
Signed-off-by: TsiChungLiew
-
Signed-off-by: TsiChungLiew
15 Aug, 2007
1 commit