26 Feb, 2015
1 commit
25 Feb, 2015
11 commits
-
This is still a non-generic board.
Signed-off-by: Masahiro Yamada
Acked-by: Sughosh Ganu
Cc: Syed Mohammed Khasim
Acked-by: Marek Vasut -
This is still a non-generic board.
Signed-off-by: Masahiro Yamada
Cc: Chan-Taek Park
Acked-by: Marek Vasut -
This is still a non-generic board.
Signed-off-by: Masahiro Yamada
Cc: Po-Yu Chuang
Acked-by: Marek Vasut -
These are still non-generic boards.
Signed-off-by: Masahiro Yamada
Cc: Greg Ungerer
Acked-by: Marek Vasut -
This is still a non-generic board.
Signed-off-by: Masahiro Yamada
Cc: Lei Wen
Acked-by: Marek Vasut -
This is still a non-generic board.
Signed-off-by: Masahiro Yamada
Cc: Matthias Weisser
Acked-by: Marek Vasut -
Now CONFIG_SPL_BUILD is not defined in Kconfig, so
"!depends on SPL_BUILD" and "if !SPL_BUILD" are redundant.Signed-off-by: Masahiro Yamada
-
There 4 JRs, 4 RTICs and 8 DECOs, and set them the same stream id
for using the same SMMU3 on LS1021A.Signed-off-by: Xiubo Li
Signed-off-by: Alison Wang
Reviewed-by: York Sun -
Upgrade Manage Complex (MC) flib API to 0.5.2. Rename directory
fsl_mc to fsl-mc. Change the fsl-mc node in Linux device tree
from "fsl,dprcr" to "fsl-mc". Print MC version info when
appropriate.Signed-off-by: J. German Rivera
Signed-off-by: Lijun Pan
Reviewed-by: York Sun -
DP-DDR benefits from auto precharge because of its specific
application.Signed-off-by: York Sun
-
LS2085A and its variants can have up to four clusters. It is safe
to enable timebase for all even some may be disabled.Signed-off-by: York Sun
22 Feb, 2015
1 commit
21 Feb, 2015
4 commits
-
Sending out 5V when there is a charger connected to the otg port is not a
good idea, so check for this and error out.Note this commit currently breaks otg support on the q8h tablets, as we need
to do some magic with the pmic there to get vbus info, this is deliberate
(better safe then sorry), fixing this is on my TODO list.Signed-off-by: Hans de Goede
Acked-by: Ian Campbell -
USB doesn't seem to work yet; the controller detects the on-board Hub/
Ethernet device but can't read the descriptors from it. I haven't
investigated yet.Signed-off-by: Stephen Warren
-
Signed-off-by: Stephen Warren
-
The board select menu in arch/arm/Kconfig is still big.
To slim down it, this commit moves AT91 boards to
arch/arm/mach-at91/Kconfig.
Also, consolidate "config SYS_SOC" in each board Kconfig.The Kconfig files under board/ directory were modified with the
following command:find board -name Kconfig | xargs sed -i -e '
/config SYS_SOC/ {
N
/default "at91"/ {
N
d
}
}
'Signed-off-by: Masahiro Yamada
Acked-by: Andreas Bießmann
20 Feb, 2015
3 commits
-
Add support for the 6" 480x800 tl059wv5c0 panel used on e.g. Utoo P66 and
Aigo M60/M608/M606 tablets.Signed-off-by: Hans de Goede
Acked-by: Ian Campbell -
This commits adds support for configuring a a bitbang i2c controller, which
is used on some boards to configure the LCD panel (via i2c).Signed-off-by: Hans de Goede
Acked-by: Ian Campbell -
On some boards there is a gpio to reset the LCD panel, add support for this.
Signed-off-by: Hans de Goede
Acked-by: Ian Campbell
18 Feb, 2015
3 commits
-
Signed-off-by: Andreas Bießmann
Reviewed-by: Simon Glass -
Prefix mmu.h PAGE_xxx definitions with MMU_ in order to prevent a naming
conflict with other definitions.Signed-off-by: Andreas Bießmann
17 Feb, 2015
13 commits
-
This is not used anymore since the procedure was split into a simple
read function and a later alaysis.The ivm_read_eeprom name is now used for the previous
ivm_simple_read_eeprom function.Signed-off-by: Valentin Longchamp
-
This allows to define the ethaddr env variable according to the the IVM
content by reading the IVM in misc_init_r.Later, when HUSH is available the content read earlier is analyzed to
populate some non env variables.Signed-off-by: Valentin Longchamp
-
This allows to define the ethaddr env variable according to the the IVM
content by reading the IVM in misc_init_r.Later, when HUSH is available the content read earlier is analyzed to
populate some non env variables.Signed-off-by: Valentin Longchamp
-
This allows to define the ethaddr env variable according to the the IVM
content by reading the IVM in misc_init_r.Later, when HUSH is available the content read earlier is analyzed to
populate some non env variables.Signed-off-by: Valentin Longchamp
-
This allows to define the ethaddr env variable according to the the IVM
content by reading the IVM in misc_init_r.Later, when HUSH is available the content read earlier is analyzed to
populate some non env variables.Signed-off-by: Valentin Longchamp
-
This allows to first read the IVM content (earlier in the boot sequence)
and define the ethaddr env variable thanks to the ivm_read_eepromi().
Later, the IVM content can be parsed and used to define some hush
variables, when the hush subsystem is available thanks to
ivm_analyze_eeprom().To avoid the HW read to happen twice, the buffer passed to
ivm_read_eeprom() has to be reused by ivm_analyze_eeprom (and thus
allocated before calling ivm_read_eeprom()).Signed-off-by: Valentin Longchamp
-
Make sunxi's FEL code fit with the normal U-Boot boot sequence instead of
creating its own. There are some #ifdefs required in start.S. Future work
will hopefully remove these.This series is available at u-boot-dm, branch sunxi-working.
Signed-off-by: Simon Glass
Acked-by: Hans de Goede
Signed-off-by: Hans de Goede -
The link register value can be required on some boards (e.g. FEL mode on
sunxi) so use a branch instruction to jump to save_boot_params() instead
of a branch link.This requires a branch back to save_boot_params_ret so adjust the users
to deal with this. For exynos just drop the function since it doesn't
do anything.Signed-off-by: Simon Glass
Acked-by: Siarhei Siamashka
Acked-by: Hans de Goede
Signed-off-by: Hans de Goede -
Signed-off-by: Hans de Goede
-
Signed-off-by: Paul Kocialkowski
Acked-by: Hans de Goede
Signed-off-by: Hans de Goede -
KS2 ddr3 initialization uses ddr3_size global variable before u-boot
relocation. Even if the variable is not being used after relocation,
writing to it corrupts relocation table.This patch removes the global ddr3_size variable and uses local one
instead.Signed-off-by: Vitaly Andrianov
Tested-by: Nishanth Menon -
The value in SDRAM_REF_CTRL controls the delay time between
the initial rising edge of DDR_RESETn to rising edge of DDR_CKE
(JEDEC specs this as 500us). In order to achieve this, SDRAM_REF_CTRL
should be written with a value corresponding to 500us delay before
starting DDR initialization sequence, and configure proper
value at the end of sequence.Signed-off-by: Lokesh Vutla
16 Feb, 2015
2 commits
-
The README describes the recovery method which can be used if the NAS box
is not reachable anymore. Addionally, it describes the different boot
scripts.Signed-off-by: Michael Walle
14 Feb, 2015
2 commits