13 Apr, 2015
1 commit
11 Apr, 2015
1 commit
10 Apr, 2015
10 commits
-
This consolidates the flash settings for the Integrator
and activates the new ARM flash image support for them
so images can be loaded by name from flash.Reviewed-by: Tom Rini
Signed-off-by: Linus Walleij -
This modifies the vexpress64 Juno configuration so that
it will by default load and boot a kernel and a device tree
from the images stored in the NOR flash. When we are
at it, also define the proper command line for the Juno and
indicate that the USB stick (/dev/sda1) is the default
root file system.Reviewed-by: Tom Rini
Signed-off-by: Linus Walleij -
Work_92105 from Work Microwave is an LPC3250-
based board with the following features:
- 64MB or 128MB SDR DRAM
- 1 GB SLC NAND, managed through MLC controller.
- Ethernet
- Ethernet + PHY SMSC8710
- I2C:
- EEPROM (24M01-compatible)
- RTC (DS1374-compatible)
- Temperature sensor (DS620)
- DACs (2 x MAX518)
- SPI (through SSP interface)
- Port expander MAX6957
- LCD display (HD44780-compatible), controlled
through the port expander and DACsThis board has SPL support, and uses the LPC32XX boot
image format.Signed-off-by: Albert ARIBAUD (3ADEV)
-
Signed-off-by: Albert ARIBAUD (3ADEV)
-
Signed-off-by: Albert ARIBAUD (3ADEV)
-
Signed-off-by: Albert ARIBAUD (3ADEV)
-
This allows to clean up the config a good deal and also converts
pandora to Generic Board.Signed-off-by: Grazvydas Ignotas
-
Remove obsolete email address from MAINTAINERS.
Signed-off-by: Anatolij Gustschin
Cc: Masahiro Yamada
Cc: Tom Rini -
There're 2 versions of motherboards that could be used in ARC SDP.
The only important difference for U-Boot is different NAND IC in use:
[1] v2 board (we used to support up until now) sports MT29F4G08ABADAWP
while
[2] v3 board sports MT29F4G16ABADAWPThey are almost the same except data bus width 8-bit in [1] and 16-bit
in [2]. And for proper support of 16-bit data bus we have to pass
NAND_BUSWIDTH_16 option to NAND driver core - which we do now knowing
board type we're running on.Signed-off-by: Alexey Brodkin
09 Apr, 2015
1 commit
-
Add support for Inverse Path USB armory board, an open source
flash-drive sized computer based on Freescale i.MX53 SoC.http://inversepath.com/usbarmory
Signed-off-by: Andrej Rosano
Cc: Stefano Babic
Cc: Chris Kuethe
Cc: Fabio Estevam
Cc: Vagrant Cascadian
Tested-By: Vagrant Cascadian
Tested-by: Chris Kuethe
08 Apr, 2015
1 commit
-
Since commit 32df39c741788e ("mx5: fix get_reset_cause") we have the following
boot messages on a mx53qsb:U-Boot 2015.04-rc5-00029-gd68df02 (Apr 06 2015 - 11:15:39)
CPU: Freescale i.MX53 rev2.1 at 800 MHz
Reset cause: POR
Board: MX53 LOCO
I2C: ready
DRAM: 1 GiB
MMC: FSL_SDHC: 0, FSL_SDHC: 1
In: serial
Out: serial
Err: serial
CPU: Freescale i.MX53 rev2.1 at 1000 MHz
Reset cause: unknown reset
Net: FEC [PRIME]The CPU and Reset cause lines appear twice.
Initially mx53 boots at 800MHz, then at a later point the PMIC is configured via
I2C to raise the CPU voltage so that it can run at 1GHz.To avoid such misleading double printings, disable printing cpu info for now.
Signed-off-by: Fabio Estevam
Acked-by: Jason Liu
06 Apr, 2015
5 commits
-
After this change it is possible to boot trats2 device with Image.itb,
which facilitates automated testing, since only one file is necessary.Signed-off-by: Lukasz Majewski
Signed-off-by: Minkyu Kang -
After this change it is possible to boot trats device with Image.itb,
which facilitates automated testing, since only one file is necessary.Signed-off-by: Lukasz Majewski
Signed-off-by: Minkyu Kang -
This change allows using Image.itb image format with Exynos4 devices
(especially trats and trats2).
Such change facilitates automated testing since only one binary needs
to be prepared.Signed-off-by: Lukasz Majewski
Signed-off-by: Minkyu Kang -
The peach boards have their SDRAM start address at 0x20000000 instead of
0x40000000 which seems common for all other exynos5 based boards. This
means the layout set in exynos5-common.h causes the kernel be loaded
more then 128MB (at 0x42000000) away from memory start which breaks
booting kernels with CONFIG_AUTO_ZRELADDRDefine a custom MEM_LAYOUT_ENV_SETTINGS for both peach boards which uses
the same offsets from start of memory as the common exynos5 settings.This fixes booting via bootz and PXE
Signed-off-by: Sjoerd Simons
Reviewed-by: Simon Glass
Signed-off-by: Minkyu Kang -
We can enable / disable trace feature from the FTRACE config options.
To enable, compile U-Boot with FTRACE=1.This patch add #ifdef FTRACE in exynos5-common.h for enable/disable
to use FTRACE configs instead of having to change board config files.Signed-off-by: Inha Song
Acked-by: Simon Glass
Signed-off-by: Minkyu Kang
03 Apr, 2015
3 commits
-
Conflicts:
board/armltd/vexpress64/vexpress64.cSigned-off-by: Tom Rini
-
Signed-off-by: Alexey Brodkin
Cc: Masahiro Yamada
Cc: Simon Glass
01 Apr, 2015
8 commits
-
Create a new configuration file: at91-sama5_common.h. Which includes the
configurations that reused by all SAMA5 chips.at91-sama5_common.h includes:
- hw macros (clock, text_base and etc.)
- default commands.
- BOOTARGS
- U-Boot common configs.
NOTE: NOR flash definition should be put before including the common header.For sama5d3-xplained:
- add CMD_SETEXPRFor sama5d3xek:
- add CMD_SETEXPR
- change CONFIG_SYS_MALLOC_LEN to (4*1024*1024)Signed-off-by: Josh Wu
-
Enable SPL support for at91sam9n12ek boards, now it supports
boot up from NAND flash, serial flash.Signed-off-by: Bo Shen
-
Enable SPL support for at91sam9x5ek board. Now, it supports
boot up from NAND flash and SPI flash.Signed-off-by: Bo Shen
-
Supports boot up from NAND flash with software ECC eanbled.
And supports boot up from SD/MMC card with FAT file system.As the boot from SD/MMC card with FAT file system, the BSS
segment is too big to fit into SRAM, so, use the lds to put
it into SDRAM.Signed-off-by: Bo Shen
-
Insteading in mmc's raw sectors, this patch will save the environment
in a fat file (uboot.env) in mmc card's first FAT patition by default.If you want to save in mmc's raw sectors, you only need to define
CONFIG_ENV_IS_IN_MMC.Signed-off-by: Josh Wu
Acked-by: Bo Shen -
move MACH_TYPE into defconfig
Signed-off-by: Heiko Schocher
31 Mar, 2015
9 commits
-
This command is only enabled by one board, complicates the NAND code,
and doesn't appear to have been functioning properly for several
years. If there are no bad blocks in the NAND region being written
nand_write_skip_bad() will take the shortcut of calling nand_write()
which bypasses the special yaffs handling. This causes invalid YAFFS
data to be written. See
http://lists.denx.de/pipermail/u-boot/2011-September/102830.html for
an example and a potential workaround.U-Boot still retains the ability to mount and access YAFFS partitions
via CONFIG_YAFFS2.Signed-off-by: Peter Tyser
-
The CONFIG_MTD_NAND_VERIFY_WRITE has been removed from Linux for some
time and a more generic method of NAND verification now exists in U-Boot.Signed-off-by: Peter Tyser
Tested-by: Heiko Schocher
Acked-by: Heiko Schocher -
Add nand_verify() and nand_verify_page_oob(). nand_verify() verifies
NAND contents against an arbitrarily sized buffer using ECC while
nand_verify_page_oob() verifies a NAND page's contents and OOB.Signed-off-by: Peter Tyser
Tested-by: Heiko Schocher
Acked-by: Heiko Schocher -
The use of the nand_write_options and nand_read_options structures were
removed in commit dfbf617ff055e4216f78d358b0867c548916d14b. Remove the
now-unused structures too.Signed-off-by: Peter Tyser
-
This option was removed along with legacy NAND support in
be33b046b549ad88c204c209508cd7657232ffbd. Clean up some remnants.Signed-off-by: Peter Tyser
-
Bring the Colibri T20 configuration in-line with Apalis/Colibri T30.
Signed-off-by: Marcel Ziswiler
Signed-off-by: Tom Warren -
In accordance with our other modules supported by U-Boot and as agreed
upon for Apalis/Colibri T30 get rid of the carrier board in the board/
configuration/device-tree naming.While at it also bring the prompt more in line with our other products.
Signed-off-by: Marcel Ziswiler
Signed-off-by: Tom Warren -
This CONFIG is not used, so drop it.
Signed-off-by: Simon Glass
Tested-by: Stephen Warren
Acked-by: Stephen Warren
Signed-off-by: Tom Warren
30 Mar, 2015
1 commit
-
This patch enables QUAD read mode for qspi to improve the
read performace while loading the binaries from qspi.Signed-off-by: Ravi Babu
Reviewed-by: Jagannadha Sutradharudu Teki
