#

  # (C) Copyright 2000-2009

  # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  #
  # See file CREDITS for list of people who contributed to this
  # project.
  #
  # This program is free software; you can redistribute it and/or
  # modify it under the terms of the GNU General Public License as

  # published by the Free Software Foundatio; either version 2 of

  # the License, or (at your option) any later version.
  #
  # This program is distributed in the hope that it will be useful,
  # but WITHOUT ANY WARRANTY; without even the implied warranty of

  # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the

  # GNU General Public License for more details.
  #
  # You should have received a copy of the GNU General Public License
  # along with this program; if not, write to the Free Software
  # Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  # MA 02111-1307 USA
  #

  VERSION = 2009

  PATCHLEVEL = 11

  SUBLEVEL =

  EXTRAVERSION =

  ifneq "$(SUBLEVEL)" ""

  U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)

  else
  U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL)$(EXTRAVERSION)
  endif

  TIMESTAMP_FILE = $(obj)include/timestamp_autogenerated.h

  VERSION_FILE = $(obj)include/version_autogenerated.h

  HOSTARCH := $(shell uname -m | \
  	sed -e s/i.86/i386/ \
  	    -e s/sun4u/sparc64/ \
  	    -e s/arm.*/arm/ \
  	    -e s/sa110/arm/ \
  	    -e s/powerpc/ppc/ \

  	    -e s/ppc64/ppc/ \

  	    -e s/macppc/ppc/)

  HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \

  	    sed -e 's/\(cygwin\).*/cygwin/')

  # Set shell to bash if possible, otherwise fall back to sh
  SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
  	else if [ -x /bin/bash ]; then echo /bin/bash; \
  	else echo sh; fi; fi)
  
  export	HOSTARCH HOSTOS SHELL

  
  # Deal with colliding definitions from tcsh etc.
  VENDOR=
  
  #########################################################################

  # Allow for silent builds
  ifeq (,$(findstring s,$(MAKEFLAGS)))
  XECHO = echo
  else
  XECHO = :
  endif
  
  #########################################################################

  #
  # U-boot build supports producing a object files to the separate external
  # directory. Two use cases are supported:

  #

  # 1) Add O= to the make command line
  # 'make O=/tmp/build all'
  #
  # 2) Set environement variable BUILD_DIR to point to the desired location
  # 'export BUILD_DIR=/tmp/build'
  # 'make'
  #
  # The second approach can also be used with a MAKEALL script
  # 'export BUILD_DIR=/tmp/build'
  # './MAKEALL'

  #

  # Command line 'O=' setting overrides BUILD_DIR environent variable.

  #

  # When none of the above methods is used the local build is performed and
  # the object files are placed in the source directory.

  #

  
  ifdef O
  ifeq ("$(origin O)", "command line")
  BUILD_DIR := $(O)
  endif
  endif
  
  ifneq ($(BUILD_DIR),)
  saved-output := $(BUILD_DIR)

  
  # Attempt to create a output directory.
  $(shell [ -d ${BUILD_DIR} ] || mkdir -p ${BUILD_DIR})

  # Verify if it was successful.

  BUILD_DIR := $(shell cd $(BUILD_DIR) && /bin/pwd)
  $(if $(BUILD_DIR),,$(error output directory "$(saved-output)" does not exist))
  endif # ifneq ($(BUILD_DIR),)
  
  OBJTREE		:= $(if $(BUILD_DIR),$(BUILD_DIR),$(CURDIR))
  SRCTREE		:= $(CURDIR)
  TOPDIR		:= $(SRCTREE)
  LNDIR		:= $(OBJTREE)
  export	TOPDIR SRCTREE OBJTREE
  
  MKCONFIG	:= $(SRCTREE)/mkconfig
  export MKCONFIG

  ifneq ($(OBJTREE),$(SRCTREE))

  REMOTE_BUILD	:= 1

  export REMOTE_BUILD
  endif
  
  # $(obj) and (src) are defined in config.mk but here in main Makefile
  # we also need them before config.mk is included which is the case for
  # some targets like unconfig, clean, clobber, distclean, etc.
  ifneq ($(OBJTREE),$(SRCTREE))
  obj := $(OBJTREE)/
  src := $(SRCTREE)/
  else
  obj :=
  src :=

  endif

  export obj src

  # Make sure CDPATH settings don't interfere
  unexport CDPATH

  #########################################################################

  ifeq ($(ARCH),powerpc)
  ARCH = ppc
  endif

  # The "tools" are needed early, so put this first
  # Don't include stuff already done in $(LIBS)
  SUBDIRS	= tools \

  	  examples/standalone \

  	  examples/api

  
  .PHONY : $(SUBDIRS)

  ifeq ($(obj)include/config.mk,$(wildcard $(obj)include/config.mk))

  # Include autoconf.mk before config.mk so that the config options are available
  # to all top level build files.  We need the dummy all: target to prevent the
  # dependency target in autoconf.mk.dep from being the default.
  all:
  sinclude $(obj)include/autoconf.mk.dep
  sinclude $(obj)include/autoconf.mk

  # load ARCH, BOARD, and CPU configuration

  include $(obj)include/config.mk

  export	ARCH CPU BOARD VENDOR SOC

  # set default to nothing for native builds

  ifeq ($(HOSTARCH),$(ARCH))

  CROSS_COMPILE ?=

  endif

  # load other configuration
  include $(TOPDIR)/config.mk

  #########################################################################
  # U-Boot objects....order is important (i.e. start must be first)

  OBJS  = cpu/$(CPU)/start.o

  ifeq ($(CPU),i386)

  OBJS += cpu/$(CPU)/start16.o

  OBJS += cpu/$(CPU)/resetvec.o

  endif

  ifeq ($(CPU),ppc4xx)

  OBJS += cpu/$(CPU)/resetvec.o

  endif

  ifeq ($(CPU),mpc85xx)
  OBJS += cpu/$(CPU)/resetvec.o
  endif

  OBJS := $(addprefix $(obj),$(OBJS))

  LIBS  = lib_generic/libgeneric.a

  LIBS += lib_generic/lzma/liblzma.a

  LIBS += lib_generic/lzo/liblzo.a

  LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \
  	"board/$(VENDOR)/common/lib$(VENDOR).a"; fi)

  LIBS += cpu/$(CPU)/lib$(CPU).a

  ifdef SOC
  LIBS += cpu/$(CPU)/$(SOC)/lib$(SOC).a
  endif

  ifeq ($(CPU),ixp)
  LIBS += cpu/ixp/npe/libnpe.a
  endif

  LIBS += lib_$(ARCH)/lib$(ARCH).a

  LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \

  	fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a fs/yaffs2/libyaffs2.a \
  	fs/ubifs/libubifs.a

  LIBS += net/libnet.a
  LIBS += disk/libdisk.a

  LIBS += drivers/bios_emulator/libatibiosemu.a

  LIBS += drivers/block/libblock.a

  LIBS += drivers/dma/libdma.a

  LIBS += drivers/fpga/libfpga.a

  LIBS += drivers/gpio/libgpio.a

  LIBS += drivers/hwmon/libhwmon.a

  LIBS += drivers/i2c/libi2c.a

  LIBS += drivers/input/libinput.a

  LIBS += drivers/misc/libmisc.a

  LIBS += drivers/mmc/libmmc.a

  LIBS += drivers/mtd/libmtd.a
  LIBS += drivers/mtd/nand/libnand.a

  LIBS += drivers/mtd/onenand/libonenand.a

  LIBS += drivers/mtd/ubi/libubi.a

  LIBS += drivers/mtd/spi/libspi_flash.a

  LIBS += drivers/net/libnet.a

  LIBS += drivers/net/phy/libphy.a

  LIBS += drivers/net/sk98lin/libsk98lin.a

  LIBS += drivers/pci/libpci.a
  LIBS += drivers/pcmcia/libpcmcia.a

  LIBS += drivers/power/libpower.a

  LIBS += drivers/spi/libspi.a

  ifeq ($(CPU),mpc83xx)
  LIBS += drivers/qe/qe.a
  endif

  ifeq ($(CPU),mpc85xx)
  LIBS += drivers/qe/qe.a

  LIBS += cpu/mpc8xxx/ddr/libddr.a

  LIBS += cpu/mpc8xxx/lib8xxx.a

  endif
  ifeq ($(CPU),mpc86xx)
  LIBS += cpu/mpc8xxx/ddr/libddr.a

  LIBS += cpu/mpc8xxx/lib8xxx.a

  endif

  LIBS += drivers/rtc/librtc.a

  LIBS += drivers/serial/libserial.a

  LIBS += drivers/twserial/libtws.a

  LIBS += drivers/usb/gadget/libusb_gadget.a
  LIBS += drivers/usb/host/libusb_host.a
  LIBS += drivers/usb/musb/libusb_musb.a

  LIBS += drivers/usb/phy/libusb_phy.a

  LIBS += drivers/video/libvideo.a

  LIBS += drivers/watchdog/libwatchdog.a

  LIBS += common/libcommon.a

  LIBS += libfdt/libfdt.a

  LIBS += api/libapi.a

  LIBS += post/libpost.a

  
  LIBS := $(addprefix $(obj),$(LIBS))

  .PHONY : $(LIBS) $(TIMESTAMP_FILE) $(VERSION_FILE)

  LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).a
  LIBBOARD := $(addprefix $(obj),$(LIBBOARD))

  # Add GCC lib

  ifdef USE_PRIVATE_LIBGCC
  ifeq ("$(USE_PRIVATE_LIBGCC)", "yes")
  PLATFORM_LIBGCC = -L $(OBJTREE)/lib_$(ARCH) -lgcc
  else
  PLATFORM_LIBGCC = -L $(USE_PRIVATE_LIBGCC) -lgcc
  endif
  else
  PLATFORM_LIBGCC = -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
  endif
  PLATFORM_LIBS += $(PLATFORM_LIBGCC)
  export PLATFORM_LIBS

  # Special flags for CPP when processing the linker script.
  # Pass the version down so we can handle backwards compatibility
  # on the fly.
  LDPPFLAGS += \
  	-include $(TOPDIR)/include/u-boot/u-boot.lds.h \
  	$(shell $(LD) --version | \
  	  sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')

  ifeq ($(CONFIG_NAND_U_BOOT),y)
  NAND_SPL = nand_spl
  U_BOOT_NAND = $(obj)u-boot-nand.bin
  endif

  ifeq ($(CONFIG_ONENAND_U_BOOT),y)
  ONENAND_IPL = onenand_ipl
  U_BOOT_ONENAND = $(obj)u-boot-onenand.bin

  ONENAND_BIN ?= $(obj)onenand_ipl/onenand-ipl-2k.bin

  endif

  __OBJS := $(subst $(obj),,$(OBJS))

  __LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD))

  #########################################################################

  #########################################################################

  # Always append ALL so that arch config.mk's can add custom ones

  ALL += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND) $(U_BOOT_ONENAND)

  all:		$(ALL)

  $(obj)u-boot.hex:	$(obj)u-boot

  		$(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@

  $(obj)u-boot.srec:	$(obj)u-boot

  		$(OBJCOPY) -O srec $< $@

  $(obj)u-boot.bin:	$(obj)u-boot

  		$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@

  $(obj)u-boot.ldr:	$(obj)u-boot

  		$(CREATE_LDR_ENV)

  		$(LDR) -T $(CONFIG_BFIN_CPU) -c $@ $< $(LDR_FLAGS)

  
  $(obj)u-boot.ldr.hex:	$(obj)u-boot.ldr
  		$(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ -I binary
  
  $(obj)u-boot.ldr.srec:	$(obj)u-boot.ldr
  		$(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary

  $(obj)u-boot.img:	$(obj)u-boot.bin

  		./tools/mkimage -A $(ARCH) -T firmware -C none \
  		-a $(TEXT_BASE) -e 0 \

  		-n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \

  			sed -e 's/"[	 ]*$$/ for $(BOARD) board"/') \
  		-d $< $@

  $(obj)u-boot.imx:       $(obj)u-boot.bin
  		$(obj)tools/mkimage -n $(IMX_CONFIG) -T imximage \
  		-e $(TEXT_BASE) -d $< $@

  $(obj)u-boot.kwb:       $(obj)u-boot.bin
  		$(obj)tools/mkimage -n $(KWD_CONFIG) -T kwbimage \
  		-a $(TEXT_BASE) -e $(TEXT_BASE) -d $< $@

  $(obj)u-boot.sha1:	$(obj)u-boot.bin

  		$(obj)tools/ubsha1 $(obj)u-boot.bin

  $(obj)u-boot.dis:	$(obj)u-boot

  		$(OBJDUMP) -d $< > $@

  GEN_UBOOT = \

  		UNDEF_SYM=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \
  		sed  -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\

  		cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \
  			--start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \

  			-Map u-boot.map -o u-boot

  $(obj)u-boot:	depend $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) $(obj)u-boot.lds

  		$(GEN_UBOOT)
  ifeq ($(CONFIG_KALLSYMS),y)

  		smap=`$(call SYSTEM_MAP,u-boot) | \
  			awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
  		$(CC) $(CFLAGS) -DSYSTEM_MAP="\"$${smap}\"" \
  			-c common/system_map.c -o $(obj)common/system_map.o

  		$(GEN_UBOOT) $(obj)common/system_map.o
  endif

  $(OBJS):	depend

  		$(MAKE) -C cpu/$(CPU) $(if $(REMOTE_BUILD),$@,$(notdir $@))

  $(LIBS):	depend $(SUBDIRS)

  		$(MAKE) -C $(dir $(subst $(obj),,$@))

  $(LIBBOARD):	depend $(LIBS)

  		$(MAKE) -C $(dir $(subst $(obj),,$@))

  $(SUBDIRS):	depend

  		$(MAKE) -C $@ all

  $(LDSCRIPT):	depend

  		$(MAKE) -C $(dir $@) $(notdir $@)

  $(obj)u-boot.lds: $(LDSCRIPT)
  		$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@

  $(NAND_SPL):	$(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk

  		$(MAKE) -C nand_spl/board/$(BOARDDIR) all

  $(U_BOOT_NAND):	$(NAND_SPL) $(obj)u-boot.bin

  		cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin

  $(ONENAND_IPL):	$(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk

  		$(MAKE) -C onenand_ipl/board/$(BOARDDIR) all

  $(U_BOOT_ONENAND):	$(ONENAND_IPL) $(obj)u-boot.bin

  		cat $(ONENAND_BIN) $(obj)u-boot.bin > $(obj)u-boot-onenand.bin

  $(VERSION_FILE):

  		@( printf '#define U_BOOT_VERSION "U-Boot %s%s"
  ' "$(U_BOOT_VERSION)" \

  		 '$(shell $(TOPDIR)/tools/setlocalversion $(TOPDIR))' ) > $@.tmp

  		@cmp -s $@ $@.tmp && rm -f $@.tmp || mv -f $@.tmp $@

  $(TIMESTAMP_FILE):
  		@date +'#define U_BOOT_DATE "%b %d %C%y"' > $@
  		@date +'#define U_BOOT_TIME "%T"' >> $@

  gdbtools:

  		$(MAKE) -C tools/gdb all || exit 1
  
  updater:
  		$(MAKE) -C tools/updater all || exit 1
  
  env:

  		$(MAKE) -C tools/env all MTD_VERSION=${MTD_VERSION} || exit 1

  # Explicitly make _depend in subdirs containing multiple targets to prevent
  # parallel sub-makes creating .depend files simultaneously.

  depend dep:	$(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk

  		for dir in $(SUBDIRS) cpu/$(CPU) $(dir $(LDSCRIPT)) ; do \
  			$(MAKE) -C $$dir _depend ; done

  TAG_SUBDIRS = $(SUBDIRS)
  TAG_SUBDIRS += $(dir $(__LIBS))

  TAG_SUBDIRS += include

  tags ctags:

  		ctags -w -o $(obj)ctags `find $(TAG_SUBDIRS) \
  						-name '*.[chS]' -print`

  
  etags:

  		etags -a -o $(obj)etags `find $(TAG_SUBDIRS) \
  						-name '*.[chS]' -print`

  cscope:

  		find $(TAG_SUBDIRS) -name '*.[chS]' -print > cscope.files

  		cscope -b -q -k

  SYSTEM_MAP = \
  		$(NM) $1 | \

  		grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \

  		LC_ALL=C sort
  $(obj)System.map:	$(obj)u-boot
  		@$(call SYSTEM_MAP,$<) > $(obj)System.map

  #
  # Auto-generate the autoconf.mk file (which is included by all makefiles)
  #
  # This target actually generates 2 files; autoconf.mk and autoconf.mk.dep.
  # the dep file is only include in this top level makefile to determine when
  # to regenerate the autoconf.mk file.

  $(obj)include/autoconf.mk.dep: $(obj)include/config.h include/common.h
  	@$(XECHO) Generating $@ ; \

  	set -e ; \

  	: Generate the dependancies ; \

  	$(CC) -x c -DDO_DEPS_ONLY -M $(HOSTCFLAGS) $(CPPFLAGS) \

  		-MQ $(obj)include/autoconf.mk include/common.h > $@
  
  $(obj)include/autoconf.mk: $(obj)include/config.h
  	@$(XECHO) Generating $@ ; \
  	set -e ; \

  	: Extract the config macros ; \

  	$(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \

  		sed -n -f tools/scripts/define2mk.sed > $@.tmp && \
  	mv $@.tmp $@

  #########################################################################

  else	# !config.mk

  all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \
  $(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \

  $(filter-out tools,$(SUBDIRS)) $(TIMESTAMP_FILE) $(VERSION_FILE) gdbtools \
  updater env depend dep tags ctags etags cscope $(obj)System.map:

  	@echo "System not configured - see README" >&2
  	@ exit 1

  
  tools:
  	$(MAKE) -C tools
  tools-all:
  	$(MAKE) -C tools HOST_TOOLS_ALL=y

  endif	# config.mk

  .PHONY : CHANGELOG
  CHANGELOG:

  	git log --no-merges U-Boot-1_1_5.. | \
  	unexpand -a | sed -e 's/\s\s*$$//' > $@

  include/license.h: tools/bin2header COPYING
  	 cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h

  #########################################################################
  
  unconfig:

  	@rm -f $(obj)include/config.h $(obj)include/config.mk \

  		$(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \
  		$(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep

  %: %_config
  	$(MAKE)

  #========================================================================
  # PowerPC
  #========================================================================

  
  #########################################################################
  ## MPC5xx Systems
  #########################################################################

  canmb_config:	unconfig

  	@$(MKCONFIG) -a canmb ppc mpc5xxx canmb

  cmi_mpc5xx_config:	unconfig

  	@$(MKCONFIG) $(@:_config=) ppc mpc5xx cmi

  PATI_config:		unconfig

  	@$(MKCONFIG) $(@:_config=) ppc mpc5xx pati mpl

  #########################################################################

  ## MPC5xxx Systems
  #########################################################################

  aev_config: unconfig

  	@$(MKCONFIG) -a aev ppc mpc5xxx tqm5200 tqc

  BC3450_config:	unconfig

  	@$(MKCONFIG) -a BC3450 ppc mpc5xxx bc3450

  cm5200_config:	unconfig
  	@$(MKCONFIG) -a cm5200 ppc mpc5xxx cm5200

  cpci5200_config:  unconfig

  	@$(MKCONFIG) -a cpci5200  ppc mpc5xxx cpci5200 esd

  digsy_mtc_config \
  digsy_mtc_LOWBOOT_config	\
  digsy_mtc_RAMBOOT_config:	unconfig
  	@mkdir -p $(obj)include
  	@mkdir -p $(obj)board/digsy_mtc
  	@ >$(obj)include/config.h
  	@[ -z "$(findstring LOWBOOT_,$@)" ] || \
  		{ echo "TEXT_BASE = 0xFF000000" >$(obj)board/digsy_mtc/config.tmp ; \
  		  echo "... with LOWBOOT configuration" ; \
  		}
  	@[ -z "$(findstring RAMBOOT_,$@)" ] || \
  		{ echo "TEXT_BASE = 0x00100000" >$(obj)board/digsy_mtc/config.tmp ; \
  		  echo "... with RAMBOOT configuration" ; \
  		}
  	@$(MKCONFIG) -a digsy_mtc  ppc mpc5xxx digsy_mtc

  galaxy5200_LOWBOOT_config \
  galaxy5200_config:	unconfig
  	@mkdir -p $(obj)include
  	@echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
  	@$(MKCONFIG) -a galaxy5200 ppc mpc5xxx galaxy5200

  hmi1001_config:	unconfig

  	@$(MKCONFIG) hmi1001 ppc mpc5xxx hmi1001

  Lite5200_config				\
  Lite5200_LOWBOOT_config			\
  Lite5200_LOWBOOT08_config		\
  icecube_5200_config			\
  icecube_5200_LOWBOOT_config		\
  icecube_5200_LOWBOOT08_config		\

  icecube_5200_DDR_config			\
  icecube_5200_DDR_LOWBOOT_config		\

  icecube_5200_DDR_LOWBOOT08_config	\
  icecube_5100_config:			unconfig

  	@mkdir -p $(obj)include
  	@mkdir -p $(obj)board/icecube

  	@[ -z "$(findstring LOWBOOT_,$@)" ] || \
  		{ if [ "$(findstring DDR,$@)" ] ; \

  			then echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
  			else echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \

  		  fi ; \

  		  $(XECHO) "... with LOWBOOT configuration" ; \

  		}
  	@[ -z "$(findstring LOWBOOT08,$@)" ] || \

  		{ echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \

  		  echo "... with 8 MB flash only" ; \

  		  $(XECHO) "... with LOWBOOT configuration" ; \

  		}

  	@[ -z "$(findstring DDR,$@)" ] || \

  		{ echo "#define CONFIG_MPC5200_DDR"	>>$(obj)include/config.h ; \

  		  $(XECHO) "... DDR memory revision" ; \

  		}

  	@[ -z "$(findstring 5200,$@)" ] || \

  		{ echo "#define CONFIG_MPC5200"		>>$(obj)include/config.h ; \

  		  $(XECHO) "... with MPC5200 processor" ; \

  		}

  	@[ -z "$(findstring 5100,$@)" ] || \

  		{ echo "#define CONFIG_MGT5100"		>>$(obj)include/config.h ; \

  		  $(XECHO) "... with MGT5100 processor" ; \

  		}

  	@$(MKCONFIG) -a IceCube ppc mpc5xxx icecube

  jupiter_config:	unconfig

  	@$(MKCONFIG) jupiter ppc mpc5xxx jupiter

  inka4x0_config:	unconfig

  	@$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0

  ipek01_config: unconfig
  	@$(MKCONFIG) -a ipek01 ppc mpc5xxx ipek01

  lite5200b_config	\

  lite5200b_PM_config	\

  lite5200b_LOWBOOT_config:	unconfig

  	@mkdir -p $(obj)include
  	@mkdir -p $(obj)board/icecube

  	@ echo "#define CONFIG_MPC5200_DDR"	>>$(obj)include/config.h

  	@ $(XECHO) "... DDR memory revision"

  	@ echo "#define CONFIG_MPC5200"		>>$(obj)include/config.h
  	@ echo "#define CONFIG_LITE5200B"	>>$(obj)include/config.h

  	@[ -z "$(findstring _PM_,$@)" ] || \
  		{ echo "#define CONFIG_LITE5200B_PM"	>>$(obj)include/config.h ; \

  		  $(XECHO) "... with power management (low-power mode) support" ; \

  		}

  	@[ -z "$(findstring LOWBOOT_,$@)" ] || \

  		{ echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \

  		  $(XECHO) "... with LOWBOOT configuration" ; \

  		}

  	@ $(XECHO) "... with MPC5200B processor"

  	@$(MKCONFIG) -a IceCube  ppc mpc5xxx icecube

  mcc200_config	\

  mcc200_SDRAM_config	\
  mcc200_highboot_config	\
  mcc200_COM12_config	\
  mcc200_COM12_SDRAM_config	\

  mcc200_COM12_highboot_config	\
  mcc200_COM12_highboot_SDRAM_config	\

  mcc200_highboot_SDRAM_config	\
  prs200_config	\
  prs200_DDR_config	\
  prs200_highboot_config	\
  prs200_highboot_DDR_config:	unconfig

  	@mkdir -p $(obj)include
  	@mkdir -p $(obj)board/mcc200

  	@[ -n "$(findstring highboot,$@)" ] || \

  		{ $(XECHO) "... with lowboot configuration" ; \

  		}

  	@[ -z "$(findstring highboot,$@)" ] || \

  		{ echo "TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp ; \

  		  $(XECHO) "... with highboot configuration" ; \

  		}
  	@[ -n "$(findstring _SDRAM,$@)" ] || \

  		{ if [ -n "$(findstring mcc200,$@)" ]; \
  		  then \

  			$(XECHO) "... with DDR" ; \

  		  else \
  			if [ -n "$(findstring _DDR,$@)" ];\
  			then \

  				$(XECHO) "... with DDR" ; \

  			else \

  				echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ;\

  				$(XECHO) "... with SDRAM" ; \

  			fi; \
  		  fi; \

  		}
  	@[ -z "$(findstring _SDRAM,$@)" ] || \

  		{ echo "#define CONFIG_MCC200_SDRAM"	>>$(obj)include/config.h ; \

  		  $(XECHO) "... with SDRAM" ; \

  		}

  	@[ -z "$(findstring COM12,$@)" ] || \

  		{ echo "#define CONFIG_CONSOLE_COM12"	>>$(obj)include/config.h ; \

  		  $(XECHO) "... with console on COM12" ; \

  		}

  	@[ -z "$(findstring prs200,$@)" ] || \

  		{ echo "#define CONFIG_PRS200"	>>$(obj)include/config.h ;\

  		}

  	@$(MKCONFIG) -n $@ -a mcc200 ppc mpc5xxx mcc200

  mecp5200_config:  unconfig

  	@$(MKCONFIG) mecp5200  ppc mpc5xxx mecp5200 esd

  motionpro_config:	unconfig
  	@$(MKCONFIG) motionpro ppc mpc5xxx motionpro

  mucmc52_config:		unconfig
  	@$(MKCONFIG) mucmc52 ppc mpc5xxx mucmc52

  munices_config:	unconfig

  	@$(MKCONFIG) munices ppc mpc5xxx munices

  MVBC_P_config: unconfig
  	@mkdir -p $(obj)include
  	@mkdir -p $(obj)board/mvbc_p
  	@ >$(obj)include/config.h
  	@[ -z "$(findstring MVBC_P,$@)" ] || \
  	{   	echo "#define CONFIG_MVBC_P" 	>>$(obj)include/config.h; }
  	@$(MKCONFIG) -n $@ -a MVBC_P ppc mpc5xxx mvbc_p matrix_vision

  o2dnt_config:	unconfig

  	@$(MKCONFIG) o2dnt ppc mpc5xxx o2dnt

  pcm030_config \
  pcm030_LOWBOOT_config:	unconfig

  	@mkdir -p $(obj)include $(obj)board/phytec/pcm030

  	@ >$(obj)include/config.h

  	@[ -z "$(findstring LOWBOOT_,$@)" ] || \
  		{ echo "TEXT_BASE = 0xFF000000"	>$(obj)board/phytec/pcm030/config.tmp ; \
  		  echo "... with LOWBOOT configuration" ; \
  		}
  	@$(MKCONFIG) -a pcm030 ppc mpc5xxx pcm030 phytec

  pf5200_config:	unconfig

  	@$(MKCONFIG) pf5200  ppc mpc5xxx pf5200 esd

  PM520_config \
  PM520_DDR_config \
  PM520_ROMBOOT_config \
  PM520_ROMBOOT_DDR_config:	unconfig

  	@mkdir -p $(obj)include

  	@[ -z "$(findstring DDR,$@)" ] || \

  		{ echo "#define CONFIG_MPC5200_DDR"	>>$(obj)include/config.h ; \

  		  $(XECHO) "... DDR memory revision" ; \

  		}
  	@[ -z "$(findstring ROMBOOT,$@)" ] || \

  		{ echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \

  		  $(XECHO) "... booting from 8-bit flash" ; \

  		}

  	@$(MKCONFIG) -a PM520 ppc mpc5xxx pm520

  smmaco4_config: unconfig

  	@$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200 tqc

  
  spieval_config:	unconfig

  	@$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200 tqc

  TB5200_B_config \

  TB5200_config:	unconfig

  	@mkdir -p $(obj)include

  	@[ -z "$(findstring _B,$@)" ] || \

  		{ echo "#define CONFIG_TQM5200_B"	>>$(obj)include/config.h ; \

  		  $(XECHO) "... with MPC5200B processor" ; \

  		}

  	@$(MKCONFIG) -n $@ -a TB5200 ppc mpc5xxx tqm5200 tqc

  MINI5200_config	\
  EVAL5200_config	\
  TOP5200_config:	unconfig

  	@mkdir -p $(obj)include
  	@ echo "#define CONFIG_$(@:_config=) 1"	>$(obj)include/config.h
  	@$(MKCONFIG) -n $@ -a TOP5200 ppc mpc5xxx top5200 emk

  Total5100_config		\
  Total5200_config		\
  Total5200_lowboot_config	\
  Total5200_Rev2_config		\
  Total5200_Rev2_lowboot_config:	unconfig

  	@mkdir -p $(obj)include
  	@mkdir -p $(obj)board/total5200

  	@[ -z "$(findstring 5100,$@)" ] || \

  		{ echo "#define CONFIG_MGT5100"		>>$(obj)include/config.h ; \

  		  $(XECHO) "... with MGT5100 processor" ; \

  		}
  	@[ -z "$(findstring 5200,$@)" ] || \

  		{ echo "#define CONFIG_MPC5200"		>>$(obj)include/config.h ; \

  		  $(XECHO) "... with MPC5200 processor" ; \

  		}
  	@[ -n "$(findstring Rev,$@)" ] || \

  		{ echo "#define CONFIG_TOTAL5200_REV 1"	>>$(obj)include/config.h ; \

  		  $(XECHO) "... revision 1 board" ; \

  		}
  	@[ -z "$(findstring Rev2_,$@)" ] || \

  		{ echo "#define CONFIG_TOTAL5200_REV 2"	>>$(obj)include/config.h ; \

  		  $(XECHO) "... revision 2 board" ; \

  		}
  	@[ -z "$(findstring lowboot_,$@)" ] || \

  		{ echo "TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp ; \

  		  $(XECHO) "... with lowboot configuration" ; \

  		}

  	@$(MKCONFIG) -a Total5200 ppc mpc5xxx total5200

  cam5200_config \

  cam5200_niosflash_config \

  fo300_config \

  MiniFAP_config \

  TQM5200S_config \
  TQM5200S_HIGHBOOT_config \

  TQM5200_B_config \
  TQM5200_B_HIGHBOOT_config \
  TQM5200_config	\
  TQM5200_STK100_config:	unconfig

  	@mkdir -p $(obj)include

  	@mkdir -p $(obj)board/tqc/tqm5200

  	@[ -z "$(findstring cam5200,$@)" ] || \

  		{ echo "#define CONFIG_CAM5200"	>>$(obj)include/config.h ; \
  		  echo "#define CONFIG_TQM5200S"	>>$(obj)include/config.h ; \
  		  echo "#define CONFIG_TQM5200_B"	>>$(obj)include/config.h ; \

  		  $(XECHO) "... TQM5200S on Cam5200" ; \

  		}

  	@[ -z "$(findstring niosflash,$@)" ] || \
  		{ echo "#define CONFIG_CAM5200_NIOSFLASH"	>>$(obj)include/config.h ; \

  		  $(XECHO) "... with NIOS flash driver" ; \

  		}

  	@[ -z "$(findstring fo300,$@)" ] || \

  		{ echo "#define CONFIG_FO300"	>>$(obj)include/config.h ; \

  		  $(XECHO) "... TQM5200 on FO300" ; \

  		}

  	@[ -z "$(findstring MiniFAP,$@)" ] || \

  		{ echo "#define CONFIG_MINIFAP"	>>$(obj)include/config.h ; \

  		  $(XECHO) "... TQM5200_AC on MiniFAP" ; \

  		}

  	@[ -z "$(findstring STK100,$@)" ] || \

  		{ echo "#define CONFIG_STK52XX_REV100"	>>$(obj)include/config.h ; \

  		  $(XECHO) "... on a STK52XX.100 base board" ; \

  		}

  	@[ -z "$(findstring TQM5200_B,$@)" ] || \

  		{ echo "#define CONFIG_TQM5200_B"	>>$(obj)include/config.h ; \

  		}
  	@[ -z "$(findstring TQM5200S,$@)" ] || \

  		{ echo "#define CONFIG_TQM5200S"	>>$(obj)include/config.h ; \
  		  echo "#define CONFIG_TQM5200_B"	>>$(obj)include/config.h ; \

  		}

  	@[ -z "$(findstring HIGHBOOT,$@)" ] || \

  		{ echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \

  		}

  	@$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200 tqc

  uc101_config:		unconfig

  	@$(MKCONFIG) uc101 ppc mpc5xxx uc101

  v38b_config: unconfig
  	@$(MKCONFIG) -a v38b ppc mpc5xxx v38b

  #########################################################################

  ## MPC512x Systems
  #########################################################################

  aria_config:	unconfig
  	@$(MKCONFIG) -a aria ppc mpc512x aria davedenx

  mecp5123_config:	unconfig
  	@$(MKCONFIG) -a mecp5123 ppc mpc512x mecp5123 esd

  mpc5121ads_config \
  mpc5121ads_rev2_config	\

  	: unconfig

  	@mkdir -p $(obj)include

  	@if [ "$(findstring rev2,$@)" ] ; then \
  		echo "#define CONFIG_ADS5121_REV2 1" > $(obj)include/config.h; \

  	fi

  	@$(MKCONFIG) -a mpc5121ads ppc mpc512x mpc5121ads freescale

  
  #########################################################################

  ## MPC8xx Systems
  #########################################################################

  Adder_config	\

  Adder87x_config \

  AdderII_config	\

  	:		unconfig

  	@mkdir -p $(obj)include

  	$(if $(findstring AdderII,$@), \

  	@echo "#define CONFIG_MPC852T" > $(obj)include/config.h)
  	@$(MKCONFIG) -a Adder ppc mpc8xx adder

  AdderUSB_config:	unconfig

  	@$(MKCONFIG) -a AdderUSB ppc mpc8xx adder

  ADS860_config	  \
  FADS823_config	  \

  FADS850SAR_config \
  MPC86xADS_config  \

  MPC885ADS_config  \

  FADS860T_config:	unconfig

  	@$(MKCONFIG) $(@:_config=) ppc mpc8xx fads

  
  AMX860_config	:	unconfig

  	@$(MKCONFIG) $(@:_config=) ppc mpc8xx amx860 westel

  
  c2mon_config:		unconfig

  	@$(MKCONFIG) $(@:_config=) ppc mpc8xx c2mon

  
  CCM_config:		unconfig

  	@$(MKCONFIG) $(@:_config=) ppc mpc8xx CCM siemens

  
  cogent_mpc8xx_config:	unconfig

  	@$(MKCONFIG) $(@:_config=) ppc mpc8xx cogent

  ELPT860_config:		unconfig

  	@$(MKCONFIG) $(@:_config=) ppc mpc8xx elpt860 LEOX

  EP88x_config:		unconfig

  	@$(MKCONFIG) $(@:_config=) ppc mpc8xx ep88x

  ESTEEM192E_config:	unconfig

  	@$(MKCONFIG) $(@:_config=) ppc mpc8xx esteem192e

  
  ETX094_config	:	unconfig

  	@$(MKCONFIG) $(@:_config=) ppc mpc8xx etx094

  FLAGADM_config:	unconfig

  	@$(MKCONFIG) $(@:_config=) ppc mpc8xx flagadm

  xtract_GEN860T = $(subst _SC,,$(subst _config,,$1))
  
  GEN860T_SC_config	\

  GEN860T_config: unconfig

  	@mkdir -p $(obj)include

  	@[ -z "$(findstring _SC,$@)" ] || \

  		{ echo "#define CONFIG_SC" >>$(obj)include/config.h ; \

  		  $(XECHO) "With reduced H/W feature set (SC)..." ; \

  		}

  	@$(MKCONFIG) -a $(call xtract_GEN860T,$@) ppc mpc8xx gen860t

  
  GENIETV_config:	unconfig

  	@$(MKCONFIG) $(@:_config=) ppc mpc8xx genietv

  
  GTH_config:	unconfig

  	@$(MKCONFIG) $(@:_config=) ppc mpc8xx gth

  
  hermes_config	:	unconfig

  	@$(MKCONFIG) $(@:_config=) ppc mpc8xx hermes

  HMI10_config	:	unconfig

  	@$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx tqc

  IAD210_config: unconfig

  	@$(MKCONFIG) $(@:_config=) ppc mpc8xx IAD210 siemens

  
  xtract_ICU862 = $(subst _100MHz,,$(subst _config,,$1))
  
  ICU862_100MHz_config	\
  ICU862_config: unconfig

  	@mkdir -p $(obj)include

  	@[ -z "$(findstring _100MHz,$@)" ] || \

  		{ echo "#define CONFIG_100MHz"	>>$(obj)include/config.h ; \

  		  $(XECHO) "... with 100MHz system clock" ; \

  		}

  	@$(MKCONFIG) -a $(call xtract_ICU862,$@) ppc mpc8xx icu862

  
  IP860_config	:	unconfig

  	@$(MKCONFIG) $(@:_config=) ppc mpc8xx ip860

  
  IVML24_256_config \
  IVML24_128_config \
  IVML24_config:	unconfig

  	@mkdir -p $(obj)include

  	@[ -z "$(findstring IVML24_config,$@)" ] || \

  		 { echo "#define CONFIG_IVML24_16M"	>>$(obj)include/config.h ; \

  		 }
  	@[ -z "$(findstring IVML24_128_config,$@)" ] || \

  		 { echo "#define CONFIG_IVML24_32M"	>>$(obj)include/config.h ; \

  		 }
  	@[ -z "$(findstring IVML24_256_config,$@)" ] || \

  		 { echo "#define CONFIG_IVML24_64M"	>>$(obj)include/config.h ; \

  		 }

  	@$(MKCONFIG) -a IVML24 ppc mpc8xx ivm

  
  IVMS8_256_config \
  IVMS8_128_config \
  IVMS8_config:	unconfig

  	@mkdir -p $(obj)include

  	@[ -z "$(findstring IVMS8_config,$@)" ] || \

  		 { echo "#define CONFIG_IVMS8_16M"	>>$(obj)include/config.h ; \

  		 }
  	@[ -z "$(findstring IVMS8_128_config,$@)" ] || \

  		 { echo "#define CONFIG_IVMS8_32M"	>>$(obj)include/config.h ; \

  		 }
  	@[ -z "$(findstring IVMS8_256_config,$@)" ] || \

  		 { echo "#define CONFIG_IVMS8_64M"	>>$(obj)include/config.h ; \

  		 }

  	@$(MKCONFIG) -a IVMS8 ppc mpc8xx ivm

  kmsupx4_config:		unconfig
  	@$(MKCONFIG) $(@:_config=) ppc mpc8xx km8xx keymile

  KUP4K_config	:	unconfig

  	@$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4k kup

  KUP4X_config	:	unconfig

  	@$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4x kup

  LANTEC_config	:	unconfig

  	@$(MKCONFIG) $(@:_config=) ppc mpc8xx lantec

  
  lwmon_config:		unconfig

  	@$(MKCONFIG) $(@:_config=) ppc mpc8xx lwmon

  
  MBX_config	\
  MBX860T_config:	unconfig

  	@$(MKCONFIG) $(@:_config=) ppc mpc8xx mbx8xx

  mgsuvd_config:		unconfig

  	@$(MKCONFIG) $(@:_config=) ppc mpc8xx km8xx keymile

  MHPC_config:		unconfig

  	@$(MKCONFIG) $(@:_config=) ppc mpc8xx mhpc eltec

  xtract_NETVIA = $(subst _V2,,$(subst _config,,$1))
  
  NETVIA_V2_config \

  NETVIA_config:		unconfig

  	@mkdir -p $(obj)include

  	@[ -z "$(findstring NETVIA_config,$@)" ] || \

  		 { echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h ; \

  		  $(XECHO) "... Version 1" ; \

  		 }
  	@[ -z "$(findstring NETVIA_V2_config,$@)" ] || \

  		 { echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h ; \

  		  $(XECHO) "... Version 2" ; \

  		 }

  	@$(MKCONFIG) -a $(call xtract_NETVIA,$@) ppc mpc8xx netvia

  xtract_NETPHONE = $(subst _V2,,$(subst _config,,$1))
  
  NETPHONE_V2_config \

  NETPHONE_config:	unconfig

  	@mkdir -p $(obj)include

  	@[ -z "$(findstring NETPHONE_config,$@)" ] || \

  		 { echo "#define CONFIG_NETPHONE_VERSION 1" >>$(obj)include/config.h ; \

  		 }
  	@[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \

  		 { echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h ; \

  		 }

  	@$(MKCONFIG) -a $(call xtract_NETPHONE,$@) ppc mpc8xx netphone

  xtract_NETTA = $(subst _SWAPHOOK,,$(subst _6412,,$(subst _ISDN,,$(subst _config,,$1))))

  NETTA_ISDN_6412_SWAPHOOK_config \
  NETTA_ISDN_SWAPHOOK_config \
  NETTA_6412_SWAPHOOK_config \
  NETTA_SWAPHOOK_config \
  NETTA_ISDN_6412_config \

  NETTA_ISDN_config \

  NETTA_6412_config \

  NETTA_config:		unconfig

  	@mkdir -p $(obj)include

  	@[ -z "$(findstring ISDN_,$@)" ] || \

  		 { echo "#define CONFIG_NETTA_ISDN 1" >>$(obj)include/config.h ; \

  		 }
  	@[ -n "$(findstring ISDN_,$@)" ] || \

  		 { echo "#undef CONFIG_NETTA_ISDN" >>$(obj)include/config.h ; \

  		 }

  	@[ -z "$(findstring 6412_,$@)" ] || \

  		 { echo "#define CONFIG_NETTA_6412 1" >>$(obj)include/config.h ; \

  		 }
  	@[ -n "$(findstring 6412_,$@)" ] || \

  		 { echo "#undef CONFIG_NETTA_6412" >>$(obj)include/config.h ; \

  		 }
  	@[ -z "$(findstring SWAPHOOK_,$@)" ] || \

  		 { echo "#define CONFIG_NETTA_SWAPHOOK 1" >>$(obj)include/config.h ; \

  		 }
  	@[ -n "$(findstring SWAPHOOK_,$@)" ] || \

  		 { echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h ; \

  		 }

  	@$(MKCONFIG) -a $(call xtract_NETTA,$@) ppc mpc8xx netta

  xtract_NETTA2 = $(subst _V2,,$(subst _config,,$1))
  
  NETTA2_V2_config \
  NETTA2_config:		unconfig

  	@mkdir -p $(obj)include

  	@[ -z "$(findstring NETTA2_config,$@)" ] || \

  		 { echo "#define CONFIG_NETTA2_VERSION 1" >>$(obj)include/config.h ; \

  		 }
  	@[ -z "$(findstring NETTA2_V2_config,$@)" ] || \

  		 { echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h ; \

  		 }

  	@$(MKCONFIG) -a $(call xtract_NETTA2,$@) ppc mpc8xx netta2

  NC650_Rev1_config \
  NC650_Rev2_config \
  CP850_config:	unconfig

  	@mkdir -p $(obj)include

  	@[ -z "$(findstring CP850,$@)" ] || \

  		 { echo "#define CONFIG_CP850 1" >>$(obj)include/config.h ; \
  		   echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \

  		 }
  	@[ -z "$(findstring Rev1,$@)" ] || \

  		 { echo "#define CONFIG_IDS852_REV1 1" >>$(obj)include/config.h ; \