Blame view
README
210 KB
c609719b8 Initial revision |
1 |
# |
eca3aeb35 Licenses: introdu... |
2 |
# (C) Copyright 2000 - 2013 |
c609719b8 Initial revision |
3 4 |
# Wolfgang Denk, DENX Software Engineering, wd@denx.de. # |
eca3aeb35 Licenses: introdu... |
5 |
# SPDX-License-Identifier: GPL-2.0+ |
c609719b8 Initial revision |
6 7 8 9 |
# Summary: ======== |
24ee89b97 * Fix mdelay() on... |
10 |
This directory contains the source code for U-Boot, a boot loader for |
e86e5a074 Code cleanup for ... |
11 12 13 14 |
Embedded boards based on PowerPC, ARM, MIPS and several other processors, which can be installed in a boot ROM and used to initialize and test the hardware or to download and run application code. |
c609719b8 Initial revision |
15 16 |
The development of U-Boot is closely related to Linux: some parts of |
24ee89b97 * Fix mdelay() on... |
17 18 |
the source code originate in the Linux source tree, we have some header files in common, and special provision has been made to |
c609719b8 Initial revision |
19 20 21 22 23 24 25 26 27 28 29 30 31 32 |
support booting of Linux images. Some attention has been paid to make this software easily configurable and extendable. For instance, all monitor commands are implemented with the same call interface, so that it's very easy to add new commands. Also, instead of permanently adding rarely used code (for instance hardware test utilities) to the monitor, you can load and run it dynamically. Status: ======= In general, all boards for which a configuration option exists in the |
24ee89b97 * Fix mdelay() on... |
33 |
Makefile have been tested to some extent and can be considered |
c609719b8 Initial revision |
34 |
"working". In fact, many of them are used in production systems. |
24ee89b97 * Fix mdelay() on... |
35 |
In case of problems see the CHANGELOG and CREDITS files to find out |
27af930e9 Merge and reforma... |
36 |
who contributed the specific port. The boards.cfg file lists board |
218ca724c README: update do... |
37 |
maintainers. |
c609719b8 Initial revision |
38 |
|
adb9d8513 README: Explain h... |
39 40 41 42 |
Note: There is no CHANGELOG file in the actual U-Boot source tree; it can be created dynamically from the Git log using: make CHANGELOG |
c609719b8 Initial revision |
43 44 45 |
Where to get help: ================== |
24ee89b97 * Fix mdelay() on... |
46 47 |
In case you have questions about, problems with or contributions for U-Boot you should send a message to the U-Boot mailing list at |
0c32565f5 Update mailing li... |
48 49 50 51 |
<u-boot@lists.denx.de>. There is also an archive of previous traffic on the mailing list - please search the archive before asking FAQ's. Please see http://lists.denx.de/pipermail/u-boot and http://dir.gmane.org/gmane.comp.boot-loaders.u-boot |
c609719b8 Initial revision |
52 |
|
218ca724c README: update do... |
53 54 55 56 57 58 59 60 |
Where to get source code: ========================= The U-Boot source code is maintained in the git repository at git://www.denx.de/git/u-boot.git ; you can browse it online at http://www.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=summary The "snapshot" links on this page allow you to download tarballs of |
11ccc33fa Many spelling fix... |
61 |
any version you might be interested in. Official releases are also |
218ca724c README: update do... |
62 63 |
available for FTP download from the ftp://ftp.denx.de/pub/u-boot/ directory. |
d4ee711d8 README: update do... |
64 |
Pre-built (and tested) images are available from |
218ca724c README: update do... |
65 |
ftp://ftp.denx.de/pub/u-boot/images/ |
c609719b8 Initial revision |
66 67 68 69 |
Where we come from: =================== - start from 8xxrom sources |
24ee89b97 * Fix mdelay() on... |
70 |
- create PPCBoot project (http://sourceforge.net/projects/ppcboot) |
c609719b8 Initial revision |
71 72 73 74 75 76 77 |
- clean up code - make it easier to add custom boards - make it possible to add other [PowerPC] CPUs - extend functions, especially: * Provide extended interface to Linux boot loader * S-Record download * network boot |
11ccc33fa Many spelling fix... |
78 |
* PCMCIA / CompactFlash / ATA disk / SCSI ... boot |
24ee89b97 * Fix mdelay() on... |
79 |
- create ARMBoot project (http://sourceforge.net/projects/armboot) |
c609719b8 Initial revision |
80 |
- add other CPU families (starting with ARM) |
24ee89b97 * Fix mdelay() on... |
81 |
- create U-Boot project (http://sourceforge.net/projects/u-boot) |
0d28f34bb Update the U-Boot... |
82 |
- current project page: see http://www.denx.de/wiki/U-Boot |
24ee89b97 * Fix mdelay() on... |
83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 |
Names and Spelling: =================== The "official" name of this project is "Das U-Boot". The spelling "U-Boot" shall be used in all written text (documentation, comments in source files etc.). Example: This is the README file for the U-Boot project. File names etc. shall be based on the string "u-boot". Examples: include/asm-ppc/u-boot.h #include <asm/u-boot.h> Variable names, preprocessor constants etc. shall be either based on the string "u_boot" or on "U_BOOT". Example: U_BOOT_VERSION u_boot_logo IH_OS_U_BOOT u_boot_hush_start |
c609719b8 Initial revision |
105 |
|
93f19cc0e Prepare for relea... |
106 107 |
Versioning: =========== |
360d883aa README: Fix descr... |
108 109 110 111 112 113 114 115 |
Starting with the release in October 2008, the names of the releases were changed from numerical release numbers without deeper meaning into a time stamp based numbering. Regular releases are identified by names consisting of the calendar year and month of the release date. Additional fields (if present) indicate release candidates or bug fix releases in "stable" maintenance trees. Examples: |
c0f40859f README: white-spa... |
116 |
U-Boot v2009.11 - Release November 2009 |
360d883aa README: Fix descr... |
117 118 |
U-Boot v2009.11.1 - Release 1 in version November 2009 stable tree U-Boot v2010.09-rc1 - Release candiate 1 for September 2010 release |
93f19cc0e Prepare for relea... |
119 |
|
c609719b8 Initial revision |
120 121 |
Directory Hierarchy: ==================== |
8d321b81c Update README to ... |
122 123 124 125 126 |
/arch Architecture specific files /arm Files generic to ARM architecture /cpu CPU specific files /arm720t Files specific to ARM 720 CPUs /arm920t Files specific to ARM 920 CPUs |
6eb0921a7 README: fix arm92... |
127 |
/at91 Files specific to Atmel AT91RM9200 CPU |
a9046b9e1 Prepare v2010-rc2 |
128 129 |
/imx Files specific to Freescale MC9328 i.MX CPUs /s3c24x0 Files specific to Samsung S3C24X0 CPUs |
8d321b81c Update README to ... |
130 131 |
/arm926ejs Files specific to ARM 926 CPUs /arm1136 Files specific to ARM 1136 CPUs |
8d321b81c Update README to ... |
132 |
/pxa Files specific to Intel XScale PXA CPUs |
8d321b81c Update README to ... |
133 134 135 136 137 138 139 140 |
/sa1100 Files specific to Intel StrongARM SA1100 CPUs /lib Architecture specific library files /avr32 Files generic to AVR32 architecture /cpu CPU specific files /lib Architecture specific library files /blackfin Files generic to Analog Devices Blackfin architecture /cpu CPU specific files /lib Architecture specific library files |
8d321b81c Update README to ... |
141 142 143 144 145 146 147 148 149 150 151 152 153 |
/m68k Files generic to m68k architecture /cpu CPU specific files /mcf52x2 Files specific to Freescale ColdFire MCF52x2 CPUs /mcf5227x Files specific to Freescale ColdFire MCF5227x CPUs /mcf532x Files specific to Freescale ColdFire MCF5329 CPUs /mcf5445x Files specific to Freescale ColdFire MCF5445x CPUs /mcf547x_8x Files specific to Freescale ColdFire MCF547x_8x CPUs /lib Architecture specific library files /microblaze Files generic to microblaze architecture /cpu CPU specific files /lib Architecture specific library files /mips Files generic to MIPS architecture /cpu CPU specific files |
92bbd64e3 README: update MI... |
154 |
/mips32 Files specific to MIPS32 CPUs |
80421fcc3 MIPS: Ingenic XBu... |
155 |
/xburst Files specific to Ingenic XBurst CPUs |
8d321b81c Update README to ... |
156 |
/lib Architecture specific library files |
afc1ce828 doc/README: docum... |
157 158 159 160 |
/nds32 Files generic to NDS32 architecture /cpu CPU specific files /n1213 Files specific to Andes Technology N1213 CPUs /lib Architecture specific library files |
8d321b81c Update README to ... |
161 162 163 |
/nios2 Files generic to Altera NIOS2 architecture /cpu CPU specific files /lib Architecture specific library files |
33c7731bd Cosmetic: Update ... |
164 165 166 |
/openrisc Files generic to OpenRISC architecture /cpu CPU specific files /lib Architecture specific library files |
a47a12bec Move arch/ppc to ... |
167 |
/powerpc Files generic to PowerPC architecture |
8d321b81c Update README to ... |
168 169 170 171 172 |
/cpu CPU specific files /74xx_7xx Files specific to Freescale MPC74xx and 7xx CPUs /mpc5xx Files specific to Freescale MPC5xx CPUs /mpc5xxx Files specific to Freescale MPC5xxx CPUs /mpc8xx Files specific to Freescale MPC8xx CPUs |
8d321b81c Update README to ... |
173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 |
/mpc824x Files specific to Freescale MPC824x CPUs /mpc8260 Files specific to Freescale MPC8260 CPUs /mpc85xx Files specific to Freescale MPC85xx CPUs /ppc4xx Files specific to AMCC PowerPC 4xx CPUs /lib Architecture specific library files /sh Files generic to SH architecture /cpu CPU specific files /sh2 Files specific to sh2 CPUs /sh3 Files specific to sh3 CPUs /sh4 Files specific to sh4 CPUs /lib Architecture specific library files /sparc Files generic to SPARC architecture /cpu CPU specific files /leon2 Files specific to Gaisler LEON2 SPARC CPU /leon3 Files specific to Gaisler LEON3 SPARC CPU /lib Architecture specific library files |
33c7731bd Cosmetic: Update ... |
189 190 191 |
/x86 Files generic to x86 architecture /cpu CPU specific files /lib Architecture specific library files |
8d321b81c Update README to ... |
192 193 194 195 196 197 |
/api Machine/arch independent API for external apps /board Board dependent files /common Misc architecture independent functions /disk Code for disk drive partition handling /doc Documentation (don't expect too much) /drivers Commonly used device drivers |
33c7731bd Cosmetic: Update ... |
198 |
/dts Contains Makefile for building internal U-Boot fdt. |
8d321b81c Update README to ... |
199 200 201 202 203 204 205 206 207 |
/examples Example code for standalone applications, etc. /fs Filesystem code (cramfs, ext2, jffs2, etc.) /include Header Files /lib Files generic to all architectures /libfdt Library files to support flattened device trees /lzma Library files to support LZMA decompression /lzo Library files to support LZO decompression /net Networking code /post Power On Self Test |
33c7731bd Cosmetic: Update ... |
208 |
/spl Secondary Program Loader framework |
8d321b81c Update README to ... |
209 |
/tools Tools to build S-Record or U-Boot images, etc. |
c609719b8 Initial revision |
210 |
|
c609719b8 Initial revision |
211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 |
Software Configuration: ======================= Configuration is usually done using C preprocessor defines; the rationale behind that is to avoid dead code whenever possible. There are two classes of configuration variables: * Configuration _OPTIONS_: These are selectable by the user and have names beginning with "CONFIG_". * Configuration _SETTINGS_: These depend on the hardware etc. and should not be meddled with if you don't know what you're doing; they have names beginning with |
6d0f6bcf3 rename CFG_ macro... |
226 |
"CONFIG_SYS_". |
c609719b8 Initial revision |
227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 |
Later we will add a configuration tool - probably similar to or even identical to what's used for the Linux kernel. Right now, we have to do the configuration by hand, which means creating some symbolic links and editing some configuration files. We use the TQM8xxL boards as an example here. Selection of Processor Architecture and Board Type: --------------------------------------------------- For all supported boards there are ready-to-use default configurations available; just type "make <board_name>_config". Example: For a TQM823L module type: cd u-boot make TQM823L_config |
11ccc33fa Many spelling fix... |
245 |
For the Cogent platform, you need to specify the CPU type as well; |
c609719b8 Initial revision |
246 247 248 249 250 251 252 253 254 255 256 257 258 |
e.g. "make cogent_mpc8xx_config". And also configure the cogent directory according to the instructions in cogent/README. Configuration Options: ---------------------- Configuration depends on the combination of board and CPU type; all such information is kept in a configuration file "include/configs/<board_name>.h". Example: For a TQM823L module, all configuration settings are in "include/configs/TQM823L.h". |
7f6c2cbc2 * Vince Husovsky,... |
259 260 261 |
Many of the options are named exactly as the corresponding Linux kernel configuration options. The intention is to make it easier to build a config tool - later. |
c609719b8 Initial revision |
262 |
The following options need to be configured: |
2628114ec README: Remove ou... |
263 264 265 |
- CPU Type: Define exactly one, e.g. CONFIG_MPC85XX. - Board Type: Define exactly one, e.g. CONFIG_MPC8540ADS. |
6ccec4492 Add ATSTK1000 and... |
266 267 |
- CPU Daughterboard Type: (if CONFIG_ATSTK1000 is defined) |
09ea0de03 README: Remove AT... |
268 |
Define exactly one, e.g. CONFIG_ATSTK1002 |
c609719b8 Initial revision |
269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 |
- CPU Module Type: (if CONFIG_COGENT is defined) Define exactly one of CONFIG_CMA286_60_OLD --- FIXME --- not tested yet: CONFIG_CMA286_60, CONFIG_CMA286_21, CONFIG_CMA286_60P, CONFIG_CMA287_23, CONFIG_CMA287_50 - Motherboard Type: (if CONFIG_COGENT is defined) Define exactly one of CONFIG_CMA101, CONFIG_CMA102 - Motherboard I/O Modules: (if CONFIG_COGENT is defined) Define one or more of CONFIG_CMA302 - Motherboard Options: (if CONFIG_CMA101 or CONFIG_CMA102 are defined) Define one or more of CONFIG_LCD_HEARTBEAT - update a character position on |
11ccc33fa Many spelling fix... |
288 |
the LCD display every second with |
c609719b8 Initial revision |
289 |
a "rotator" |\-/|\-/ |
2535d6027 * Patch by Martin... |
290 291 292 |
- Board flavour: (if CONFIG_MPC8260ADS is defined) CONFIG_ADSTYPE Possible values are: |
6d0f6bcf3 rename CFG_ macro... |
293 294 295 296 |
CONFIG_SYS_8260ADS - original MPC8260ADS CONFIG_SYS_8266ADS - MPC8266ADS CONFIG_SYS_PQ2FADS - PQ2FADS-ZU or PQ2FADS-VR CONFIG_SYS_8272ADS - MPC8272ADS |
2535d6027 * Patch by Martin... |
297 |
|
cf946c6d0 mv: seperate kirk... |
298 299 300 301 |
- Marvell Family Member CONFIG_SYS_MVFS - define it if you want to enable multiple fs option at one time for marvell soc family |
c609719b8 Initial revision |
302 |
- MPC824X Family Member (if CONFIG_MPC824X is defined) |
5da627a42 * Patch by Steven... |
303 304 |
Define exactly one of CONFIG_MPC8240, CONFIG_MPC8245 |
c609719b8 Initial revision |
305 |
|
11ccc33fa Many spelling fix... |
306 |
- 8xx CPU Options: (if using an MPC8xx CPU) |
66ca92a5b * Patch by Yuli B... |
307 308 |
CONFIG_8xx_GCLK_FREQ - deprecated: CPU clock if get_gclk_freq() cannot work |
5da627a42 * Patch by Steven... |
309 310 |
e.g. if there is no 32KHz reference PIT/RTC clock |
66ca92a5b * Patch by Yuli B... |
311 312 |
CONFIG_8xx_OSCLK - PLL input clock (either EXTCLK or XTAL/EXTAL) |
c609719b8 Initial revision |
313 |
|
66ca92a5b * Patch by Yuli B... |
314 |
- 859/866/885 CPU options: (if using a MPC859 or MPC866 or MPC885 CPU): |
6d0f6bcf3 rename CFG_ macro... |
315 316 |
CONFIG_SYS_8xx_CPUCLK_MIN CONFIG_SYS_8xx_CPUCLK_MAX |
66ca92a5b * Patch by Yuli B... |
317 |
CONFIG_8xx_CPUCLK_DEFAULT |
75d1ea7f6 Fix variable CPU ... |
318 |
See doc/README.MPC866 |
6d0f6bcf3 rename CFG_ macro... |
319 |
CONFIG_SYS_MEASURE_CPUCLK |
75d1ea7f6 Fix variable CPU ... |
320 |
|
ba56f6257 Patch by Travis S... |
321 322 323 324 325 |
Define this to measure the actual CPU clock instead of relying on the correctness of the configured values. Mostly useful for board bringup to make sure the PLL is locked at the intended frequency. Note that this requires a (stable) reference clock (32 kHz |
6d0f6bcf3 rename CFG_ macro... |
326 |
RTC clock or CONFIG_SYS_8XX_XIN) |
75d1ea7f6 Fix variable CPU ... |
327 |
|
506f39188 8xx, icache: enab... |
328 329 330 331 |
CONFIG_SYS_DELAYED_ICACHE Define this option if you want to enable the ICache only when Code runs from RAM. |
66412c637 powerpc/85xx: Cha... |
332 |
- 85xx CPU Options: |
ffd06e023 powerpc/mpc85xx: ... |
333 334 335 336 337 |
CONFIG_SYS_PPC64 Specifies that the core is a 64-bit PowerPC implementation (implements the "64" category of the Power ISA). This is necessary for ePAPR compliance, among other possible reasons. |
66412c637 powerpc/85xx: Cha... |
338 339 340 341 342 |
CONFIG_SYS_FSL_TBCLK_DIV Defines the core time base clock divider ratio compared to the system clock. On most PQ3 devices this is 8, on newer QorIQ devices it can be 16 or 32. The ratio varies from SoC to Soc. |
8f29084a4 powerpc/fsl_pci: ... |
343 344 345 346 |
CONFIG_SYS_FSL_PCIE_COMPAT Defines the string to utilize when trying to match PCIe device tree nodes for the given platform. |
afa6b551f PATCH 1/4][v4] do... |
347 348 349 350 351 352 353 354 |
CONFIG_SYS_PPC_E500_DEBUG_TLB Enables a temporary TLB entry to be used during boot to work around limitations in e500v1 and e500v2 external debugger support. This reduces the portions of the boot code where breakpoints and single stepping do not work. The value of this symbol should be set to the TLB1 entry to be used for this purpose. |
33eee330c powerpc/fsl-coren... |
355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 |
CONFIG_SYS_FSL_ERRATUM_A004510 Enables a workaround for erratum A004510. If set, then CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV and CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY must be set. CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV2 (optional) Defines one or two SoC revisions (low 8 bits of SVR) for which the A004510 workaround should be applied. The rest of SVR is either not relevant to the decision of whether the erratum is present (e.g. p2040 versus p2041) or is implied by the build target, which controls whether CONFIG_SYS_FSL_ERRATUM_A004510 is set. See Freescale App Note 4493 for more information about this erratum. |
74fa22ed7 powerpc/mpc85xx:N... |
374 375 376 |
CONFIG_A003399_NOR_WORKAROUND Enables a workaround for IFC erratum A003399. It is only requred during NOR boot. |
33eee330c powerpc/fsl-coren... |
377 378 379 380 |
CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY This is the value to write into CCSR offset 0x18600 according to the A004510 workaround. |
64501c669 board/bsc9132qds:... |
381 382 383 |
CONFIG_SYS_FSL_DSP_DDR_ADDR This value denotes start offset of DDR memory which is connected exclusively to the DSP cores. |
765b0bdb8 board/bsc9131rdb:... |
384 385 386 |
CONFIG_SYS_FSL_DSP_M2_RAM_ADDR This value denotes start offset of M2 memory which is directly connected to the DSP core. |
64501c669 board/bsc9132qds:... |
387 388 389 |
CONFIG_SYS_FSL_DSP_M3_RAM_ADDR This value denotes start offset of M3 memory which is directly connected to the DSP core. |
765b0bdb8 board/bsc9131rdb:... |
390 391 |
CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT This value denotes start offset of DSP CCSR space. |
b135991a3 powerpc/mpc85xx: ... |
392 393 394 395 |
CONFIG_SYS_FSL_SINGLE_SOURCE_CLK Single Source Clock is clocking mode present in some of FSL SoC's. In this mode, a single differential clock is used to supply clocks to the sysclock, ddrclock and usbclock. |
6cb461b4f MIPS: fix endiane... |
396 397 398 399 400 |
- Generic CPU options: CONFIG_SYS_BIG_ENDIAN, CONFIG_SYS_LITTLE_ENDIAN Defines the endianess of the CPU. Implementation of those values is arch specific. |
5614e71b4 Driver/DDR: Movin... |
401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 |
CONFIG_SYS_FSL_DDR Freescale DDR driver in use. This type of DDR controller is found in mpc83xx, mpc85xx, mpc86xx as well as some ARM core SoCs. CONFIG_SYS_FSL_DDR_ADDR Freescale DDR memory-mapped register base. CONFIG_SYS_FSL_DDR_EMU Specify emulator support for DDR. Some DDR features such as deskew training are not available. CONFIG_SYS_FSL_DDRC_GEN1 Freescale DDR1 controller. CONFIG_SYS_FSL_DDRC_GEN2 Freescale DDR2 controller. CONFIG_SYS_FSL_DDRC_GEN3 Freescale DDR3 controller. |
9ac4ffbde Driver/DDR: Add F... |
421 422 |
CONFIG_SYS_FSL_DDRC_ARM_GEN3 Freescale DDR3 controller for ARM-based SoCs. |
5614e71b4 Driver/DDR: Movin... |
423 424 425 426 427 428 429 430 431 432 433 434 435 |
CONFIG_SYS_FSL_DDR1 Board config to use DDR1. It can be enabled for SoCs with Freescale DDR1 or DDR2 controllers, depending on the board implemetation. CONFIG_SYS_FSL_DDR2 Board config to use DDR2. It can be eanbeld for SoCs with Freescale DDR2 or DDR3 controllers, depending on the board implementation. CONFIG_SYS_FSL_DDR3 Board config to use DDR3. It can be enabled for SoCs with Freescale DDR3 controllers. |
1b4175d6f driver/ifc:Change... |
436 437 438 439 440 |
CONFIG_SYS_FSL_IFC_BE Defines the IFC controller register space as Big Endian CONFIG_SYS_FSL_IFC_LE Defines the IFC controller register space as Little Endian |
690e42584 powerpc:Rename CO... |
441 442 443 444 445 446 447 448 |
CONFIG_SYS_FSL_PBL_PBI It enables addition of RCW (Power on reset configuration) in built image. Please refer doc/README.pblimage for more details CONFIG_SYS_FSL_PBL_RCW It adds PBI(pre-boot instructions) commands in u-boot build image. PBI commands can be used to configure SoC before it starts the execution. Please refer doc/README.pblimage for more details |
4e5b1bd0d driver/ddr: Chang... |
449 450 451 452 453 |
CONFIG_SYS_FSL_DDR_BE Defines the DDR controller register space as Big Endian CONFIG_SYS_FSL_DDR_LE Defines the DDR controller register space as Little Endian |
6b9e309a8 Driver/ddr: Add s... |
454 455 456 457 |
CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY Physical address from the view of DDR controllers. It is the same as CONFIG_SYS_DDR_SDRAM_BASE for all Power SoCs. But it could be different for ARM SoCs. |
6b1e1254f driver/ddr: Add 2... |
458 459 460 461 |
CONFIG_SYS_FSL_DDR_INTLV_256B DDR controller interleaving on 256-byte. This is a special interleaving mode, handled by Dickens for Freescale layerscape SoCs with ARM core. |
0b953ffc6 Monahans related ... |
462 |
- Intel Monahans options: |
6d0f6bcf3 rename CFG_ macro... |
463 |
CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO |
0b953ffc6 Monahans related ... |
464 465 466 467 |
Defines the Monahans run mode to oscillator ratio. Valid values are 8, 16, 24, 31. The core frequency is this value multiplied by 13 MHz. |
6d0f6bcf3 rename CFG_ macro... |
468 |
CONFIG_SYS_MONAHANS_TURBO_RUN_MODE_RATIO |
cf48eb9ab Some code cleanup |
469 |
|
0b953ffc6 Monahans related ... |
470 471 |
Defines the Monahans turbo mode to oscillator ratio. Valid values are 1 (default if undefined) and |
cf48eb9ab Some code cleanup |
472 |
2. The core frequency as calculated above is multiplied |
0b953ffc6 Monahans related ... |
473 |
by this value. |
cf48eb9ab Some code cleanup |
474 |
|
92bbd64e3 README: update MI... |
475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 |
- MIPS CPU options: CONFIG_SYS_INIT_SP_OFFSET Offset relative to CONFIG_SYS_SDRAM_BASE for initial stack pointer. This is needed for the temporary stack before relocation. CONFIG_SYS_MIPS_CACHE_MODE Cache operation mode for the MIPS CPU. See also arch/mips/include/asm/mipsregs.h. Possible values are: CONF_CM_CACHABLE_NO_WA CONF_CM_CACHABLE_WA CONF_CM_UNCACHED CONF_CM_CACHABLE_NONCOHERENT CONF_CM_CACHABLE_CE CONF_CM_CACHABLE_COW CONF_CM_CACHABLE_CUW CONF_CM_CACHABLE_ACCELERATED CONFIG_SYS_XWAY_EBU_BOOTCFG Special option for Lantiq XWAY SoCs for booting from NOR flash. See also arch/mips/cpu/mips32/start.S. CONFIG_XWAY_SWAP_BYTES Enable compilation of tools/xway-swap-bytes needed for Lantiq XWAY SoCs for booting from NOR flash. The U-Boot image needs to be swapped if a flash programmer is used. |
b67d8816f arm, arm926ejs: A... |
506 507 508 509 510 |
- ARM options: CONFIG_SYS_EXCEPTION_VECTORS_HIGH Select high exception vectors of the ARM core, e.g., do not clear the V bit of the c1 register of CP15. |
5356f5451 ARM: enable Thumb... |
511 512 513 514 515 516 517 |
CONFIG_SYS_THUMB_BUILD Use this flag to build U-Boot using the Thumb instruction set for ARM architectures. Thumb instruction set provides better code density. For ARM architectures that support Thumb2 this flag will result in Thumb2 code generated by GCC. |
c5d4752c0 ARM: implement er... |
518 |
CONFIG_ARM_ERRATA_716044 |
0678587fb ARM: implement so... |
519 520 521 |
CONFIG_ARM_ERRATA_742230 CONFIG_ARM_ERRATA_743622 CONFIG_ARM_ERRATA_751472 |
f71cbfe3c ARM: Add workarou... |
522 |
CONFIG_ARM_ERRATA_794072 |
b7588e3bd ARM: Add workarou... |
523 |
CONFIG_ARM_ERRATA_761320 |
537440da9 Update to imx_v20... |
524 |
CONFIG_ARM_ERRATA_845369 |
0678587fb ARM: implement so... |
525 526 527 528 529 530 |
If set, the workarounds for these ARM errata are applied early during U-Boot startup. Note that these options force the workarounds to be applied; no CPU-type/version detection exists, unlike the similar options in the Linux kernel. Do not set these options unless they apply! |
795659dc1 README: document ... |
531 532 533 534 535 536 |
- CPU timer options: CONFIG_SYS_HZ The frequency of the timer returned by get_timer(). get_timer() must operate in milliseconds and this CONFIG option must be set to 1000. |
5da627a42 * Patch by Steven... |
537 |
- Linux Kernel Interface: |
c609719b8 Initial revision |
538 539 540 541 542 543 544 545 546 |
CONFIG_CLOCKS_IN_MHZ U-Boot stores all clock information in Hz internally. For binary compatibility with older Linux kernels (which expect the clocks passed in the bd_info data to be in MHz) the environment variable "clocks_in_mhz" can be defined so that U-Boot converts clock data to MHZ before passing it to the Linux kernel. |
c609719b8 Initial revision |
547 |
When CONFIG_CLOCKS_IN_MHZ is defined, a definition of |
218ca724c README: update do... |
548 |
"clocks_in_mhz=1" is automatically included in the |
c609719b8 Initial revision |
549 |
default environment. |
5da627a42 * Patch by Steven... |
550 |
CONFIG_MEMSIZE_IN_BYTES [relevant for MIPS only] |
11ccc33fa Many spelling fix... |
551 |
When transferring memsize parameter to linux, some versions |
5da627a42 * Patch by Steven... |
552 553 |
expect it to be in bytes, others in MB. Define CONFIG_MEMSIZE_IN_BYTES to make it in bytes. |
fec6d9ee7 Remove the deprec... |
554 |
CONFIG_OF_LIBFDT |
f57f70aab Support passing o... |
555 556 |
New kernel versions are expecting firmware settings to be |
213bf8c82 Add a flattened d... |
557 558 559 560 561 562 |
passed using flattened device trees (based on open firmware concepts). CONFIG_OF_LIBFDT * New libfdt-based support * Adds the "fdt" command |
3bb342fc8 fdt: remove unuse... |
563 |
* The bootm command automatically updates the fdt |
213bf8c82 Add a flattened d... |
564 |
|
b55ae4024 FDT: remove obsol... |
565 566 567 568 |
OF_CPU - The proper name of the cpus node (only required for MPC512X and MPC5xxx based boards). OF_SOC - The proper name of the soc node (only required for MPC512X and MPC5xxx based boards). |
f57f70aab Support passing o... |
569 |
OF_TBCLK - The timebase frequency. |
c2871f038 Added OF_STDOUT_P... |
570 |
OF_STDOUT_PATH - The path to the console device |
f57f70aab Support passing o... |
571 |
|
11ccc33fa Many spelling fix... |
572 573 |
boards with QUICC Engines require OF_QE to set UCC MAC addresses |
3bb342fc8 fdt: remove unuse... |
574 |
|
4e2531378 Allow board code ... |
575 576 577 578 |
CONFIG_OF_BOARD_SETUP Board code has addition modification that it wants to make to the flat device tree before handing it off to the kernel |
f57f70aab Support passing o... |
579 |
|
0267768ed * Modify bootm co... |
580 |
CONFIG_OF_BOOT_CPU |
11ccc33fa Many spelling fix... |
581 |
This define fills in the correct boot CPU in the boot |
0267768ed * Modify bootm co... |
582 |
param header, the default value is zero if undefined. |
3887c3fbd mucmc52, uc101: d... |
583 584 585 586 587 588 589 590 |
CONFIG_OF_IDE_FIXUP U-Boot can detect if an IDE device is present or not. If not, and this new config option is activated, U-Boot removes the ATA node from the DTS before booting Linux, so the Linux IDE driver does not probe the device and crash. This is needed for buggy hardware (uc101) where no pull down resistor is connected to the signal IDE5V_DD7. |
7eb29398c arm: add CONFIG_M... |
591 592 593 594 595 596 597 598 599 |
CONFIG_MACH_TYPE [relevant for ARM only][mandatory] This setting is mandatory for all boards that have only one machine type and must be used to specify the machine type number as it appears in the ARM machine registry (see http://www.arm.linux.org.uk/developer/machines/). Only boards that have multiple machine types supported in a single configuration file and the machine type is runtime discoverable, do not have to use this setting. |
0b2f4ecad README: Document ... |
600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 |
- vxWorks boot parameters: bootvx constructs a valid bootline using the following environments variables: bootfile, ipaddr, serverip, hostname. It loads the vxWorks image pointed bootfile. CONFIG_SYS_VXWORKS_BOOT_DEVICE - The vxworks device name CONFIG_SYS_VXWORKS_MAC_PTR - Ethernet 6 byte MA -address CONFIG_SYS_VXWORKS_SERVERNAME - Name of the server CONFIG_SYS_VXWORKS_BOOT_ADDR - Address of boot parameters CONFIG_SYS_VXWORKS_ADD_PARAMS Add it at the end of the bootline. E.g "u=username pw=secret" Note: If a "bootargs" environment is defined, it will overwride the defaults discussed just above. |
2c451f783 armv7: cache main... |
617 618 619 620 |
- Cache Configuration: CONFIG_SYS_ICACHE_OFF - Do not enable instruction cache in U-Boot CONFIG_SYS_DCACHE_OFF - Do not enable data cache in U-Boot CONFIG_SYS_L2CACHE_OFF- Do not enable L2 cache in U-Boot |
93bc21930 armv7: add PL310 ... |
621 622 623 624 625 |
- Cache Configuration for ARM: CONFIG_SYS_L2_PL310 - Enable support for ARM PL310 L2 cache controller CONFIG_SYS_PL310_BASE - Physical base address of PL310 controller register space |
6705d81e9 * Patch by Andrea... |
626 |
- Serial Ports: |
48d0192fe Moved conditional... |
627 |
CONFIG_PL010_SERIAL |
6705d81e9 * Patch by Andrea... |
628 629 |
Define this if you want support for Amba PrimeCell PL010 UARTs. |
48d0192fe Moved conditional... |
630 |
CONFIG_PL011_SERIAL |
6705d81e9 * Patch by Andrea... |
631 632 633 634 635 636 637 638 639 640 641 642 643 |
Define this if you want support for Amba PrimeCell PL011 UARTs. CONFIG_PL011_CLOCK If you have Amba PrimeCell PL011 UARTs, set this variable to the clock speed of the UARTs. CONFIG_PL01x_PORTS If you have Amba PrimeCell PL010 or PL011 UARTs on your board, define this to a list of base addresses for each (supported) port. See e.g. include/configs/versatile.h |
910f1ae3e Serial: p1011: ne... |
644 645 646 647 648 649 650 651 652 653 654 |
CONFIG_PL011_SERIAL_RLCR Some vendor versions of PL011 serial ports (e.g. ST-Ericsson U8500) have separate receive and transmit line control registers. Set this variable to initialize the extra register. CONFIG_PL011_SERIAL_FLUSH_ON_INIT On some platforms (e.g. U8500) U-Boot is loaded by a second stage boot loader that has already initialized the UART. Define this variable to flush the UART at init time. |
6705d81e9 * Patch by Andrea... |
655 |
|
c609719b8 Initial revision |
656 |
- Console Interface: |
43d9616cf * Patch by Robert... |
657 658 659 660 |
Depending on board, define exactly one serial port (like CONFIG_8xx_CONS_SMC1, CONFIG_8xx_CONS_SMC2, CONFIG_8xx_CONS_SCC1, ...), or switch off the serial console by defining CONFIG_8xx_CONS_NONE |
c609719b8 Initial revision |
661 662 663 664 665 666 667 |
Note: if CONFIG_8xx_CONS_NONE is defined, the serial port routines must be defined elsewhere (i.e. serial_init(), serial_getc(), ...) CONFIG_CFB_CONSOLE Enables console device for a color framebuffer. Needs following |
c53043b7f MPC7xx: remove ob... |
668 |
defines (cf. smiLynxEM, i8042) |
c609719b8 Initial revision |
669 670 671 672 673 674 675 676 677 |
VIDEO_FB_LITTLE_ENDIAN graphic memory organisation (default big endian) VIDEO_HW_RECTFILL graphic chip supports rectangle fill (cf. smiLynxEM) VIDEO_HW_BITBLT graphic chip supports bit-blit (cf. smiLynxEM) VIDEO_VISIBLE_COLS visible pixel columns (cols=pitch) |
ba56f6257 Patch by Travis S... |
678 679 |
VIDEO_VISIBLE_ROWS visible pixel rows VIDEO_PIXEL_SIZE bytes per pixel |
c609719b8 Initial revision |
680 681 |
VIDEO_DATA_FORMAT graphic data format (0-5, cf. cfb_console.c) |
ba56f6257 Patch by Travis S... |
682 |
VIDEO_FB_ADRS framebuffer address |
c609719b8 Initial revision |
683 684 685 686 687 688 689 690 691 |
VIDEO_KBD_INIT_FCT keyboard int fct (i.e. i8042_kbd_init()) VIDEO_TSTC_FCT test char fct (i.e. i8042_tstc) VIDEO_GETC_FCT get char fct (i.e. i8042_getc) CONFIG_CONSOLE_CURSOR cursor drawing on/off (requires blink timer cf. i8042.c) |
6d0f6bcf3 rename CFG_ macro... |
692 |
CONFIG_SYS_CONSOLE_BLINK_COUNT blink interval (cf. i8042.c) |
c609719b8 Initial revision |
693 694 |
CONFIG_CONSOLE_TIME display time/date info in upper right corner |
602ad3b33 README: Rewrite c... |
695 |
(requires CONFIG_CMD_DATE) |
c609719b8 Initial revision |
696 697 |
CONFIG_VIDEO_LOGO display Linux logo in upper left corner |
a6c7ad2f6 * Fix startup pro... |
698 699 700 |
CONFIG_VIDEO_BMP_LOGO use bmp_logo.h instead of linux_logo.h for logo. Requires CONFIG_VIDEO_LOGO |
c609719b8 Initial revision |
701 |
CONFIG_CONSOLE_EXTRA_INFO |
11ccc33fa Many spelling fix... |
702 |
additional board info beside |
c609719b8 Initial revision |
703 |
the logo |
33a35bbbe cfb_console: Add ... |
704 705 706 |
When CONFIG_CFB_CONSOLE_ANSI is defined, console will support a limited number of ANSI escape sequences (cursor control, erase functions and limited graphics rendition control). |
43d9616cf * Patch by Robert... |
707 708 709 |
When CONFIG_CFB_CONSOLE is defined, video console is default i/o. Serial console can be forced with environment 'console=serial'. |
c609719b8 Initial revision |
710 |
|
d4ca31c40 * Cleanup lowboot... |
711 712 713 714 |
When CONFIG_SILENT_CONSOLE is defined, all console messages (by U-Boot and Linux!) can be silenced with the "silent" environment variable. See doc/README.silent for more information. |
a3ad8e26a * Patch by Steven... |
715 |
|
45ae2546e video, cfb_consol... |
716 717 718 719 |
CONFIG_SYS_CONSOLE_BG_COL: define the backgroundcolor, default is 0x00. CONFIG_SYS_CONSOLE_FG_COL: define the foregroundcolor, default is 0xa0. |
c609719b8 Initial revision |
720 721 722 |
- Console Baudrate: CONFIG_BAUDRATE - in bps Select one of the baudrates listed in |
6d0f6bcf3 rename CFG_ macro... |
723 724 |
CONFIG_SYS_BAUDRATE_TABLE, see below. CONFIG_SYS_BRGCLK_PRESCALE, baudrate prescale |
c609719b8 Initial revision |
725 |
|
c92fac91a 82xx serial, smc:... |
726 727 728 |
- Console Rx buffer length With CONFIG_SYS_SMC_RXBUFLEN it is possible to define the maximum receive buffer length for the SMC. |
2b3f12c21 8xx serial, smc: ... |
729 |
This option is actual only for 82xx and 8xx possible. |
c92fac91a 82xx serial, smc:... |
730 731 732 |
If using CONFIG_SYS_SMC_RXBUFLEN also CONFIG_SYS_MAXIDLE must be defined, to setup the maximum idle timeout for the SMC. |
9558b48af console: Implemen... |
733 |
- Pre-Console Buffer: |
4cf2609b0 README: fix docum... |
734 735 736 737 738 739 740 |
Prior to the console being initialised (i.e. serial UART initialised etc) all console output is silently discarded. Defining CONFIG_PRE_CONSOLE_BUFFER will cause U-Boot to buffer any console messages prior to the console being initialised to a buffer of size CONFIG_PRE_CON_BUF_SZ bytes located at CONFIG_PRE_CON_BUF_ADDR. The buffer is a circular buffer, so if more than CONFIG_PRE_CON_BUF_SZ |
6feff899e README: fix typos... |
741 |
bytes are output before the console is initialised, the |
4cf2609b0 README: fix docum... |
742 743 744 745 |
earlier bytes are discarded. 'Sane' compilers will generate smaller code if CONFIG_PRE_CON_BUF_SZ is a power of 2 |
9558b48af console: Implemen... |
746 |
|
046a37bd5 Add safe vsnprint... |
747 748 749 750 751 752 753 754 |
- Safe printf() functions Define CONFIG_SYS_VSNPRINTF to compile in safe versions of the printf() functions. These are defined in include/vsprintf.h and include snprintf(), vsnprintf() and so on. Code size increase is approximately 300-500 bytes. If this option is not given then these functions will silently discard their buffer size argument - this means you are not getting any overflow checking in this case. |
c609719b8 Initial revision |
755 756 757 |
- Boot Delay: CONFIG_BOOTDELAY - in seconds Delay before automatically booting the default image; set to -1 to disable autoboot. |
93d7212fa Allow runtime con... |
758 759 |
set to -2 to autoboot with no delay and not check for abort (even when CONFIG_ZERO_BOOTDELAY_CHECK is defined). |
c609719b8 Initial revision |
760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 |
See doc/README.autoboot for these options that work with CONFIG_BOOTDELAY. None are required. CONFIG_BOOT_RETRY_TIME CONFIG_BOOT_RETRY_MIN CONFIG_AUTOBOOT_KEYED CONFIG_AUTOBOOT_PROMPT CONFIG_AUTOBOOT_DELAY_STR CONFIG_AUTOBOOT_STOP_STR CONFIG_AUTOBOOT_DELAY_STR2 CONFIG_AUTOBOOT_STOP_STR2 CONFIG_ZERO_BOOTDELAY_CHECK CONFIG_RESET_TO_RETRY - Autoboot Command: CONFIG_BOOTCOMMAND Only needed when CONFIG_BOOTDELAY is enabled; define a command string that is automatically executed when no character is read on the console interface within "Boot Delay" after reset. CONFIG_BOOTARGS |
43d9616cf * Patch by Robert... |
782 783 784 |
This can be used to pass arguments to the bootm command. The value of CONFIG_BOOTARGS goes into the environment value "bootargs". |
c609719b8 Initial revision |
785 786 |
CONFIG_RAMBOOT and CONFIG_NFSBOOT |
43d9616cf * Patch by Robert... |
787 788 789 |
The value of these goes into the environment as "ramboot" and "nfsboot" respectively, and can be used as a convenience, when switching between booting from |
11ccc33fa Many spelling fix... |
790 |
RAM and NFS. |
c609719b8 Initial revision |
791 |
|
eda0ba38a bootcount: store ... |
792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 |
- Bootcount: CONFIG_BOOTCOUNT_LIMIT Implements a mechanism for detecting a repeating reboot cycle, see: http://www.denx.de/wiki/view/DULG/UBootBootCountLimit CONFIG_BOOTCOUNT_ENV If no softreset save registers are found on the hardware "bootcount" is stored in the environment. To prevent a saveenv on all reboots, the environment variable "upgrade_available" is used. If "upgrade_available" is 0, "bootcount" is always 0, if "upgrade_available" is 1 "bootcount" is incremented in the environment. So the Userspace Applikation must set the "upgrade_available" and "bootcount" variable to 0, if a boot was successfully. |
c609719b8 Initial revision |
807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 |
- Pre-Boot Commands: CONFIG_PREBOOT When this option is #defined, the existence of the environment variable "preboot" will be checked immediately before starting the CONFIG_BOOTDELAY countdown and/or running the auto-boot command resp. entering interactive mode. This feature is especially useful when "preboot" is automatically generated or modified. For an example see the LWMON board specific code: here "preboot" is modified when the user holds down a certain combination of keys on the (special) keyboard when booting the systems - Serial Download Echo Mode: CONFIG_LOADS_ECHO If defined to 1, all characters received during a serial download (using the "loads" command) are echoed back. This might be needed by some terminal emulations (like "cu"), but may as well just take time on others. This setting #define's the initial value of the "loads_echo" environment variable. |
602ad3b33 README: Rewrite c... |
831 |
- Kgdb Serial Baudrate: (if CONFIG_CMD_KGDB is defined) |
c609719b8 Initial revision |
832 833 |
CONFIG_KGDB_BAUDRATE Select one of the baudrates listed in |
6d0f6bcf3 rename CFG_ macro... |
834 |
CONFIG_SYS_BAUDRATE_TABLE, see below. |
c609719b8 Initial revision |
835 836 |
- Monitor Functions: |
602ad3b33 README: Rewrite c... |
837 838 |
Monitor commands can be included or excluded from the build by using the #include files |
c6c621bdb README: fix refer... |
839 840 |
<config_cmd_all.h> and #undef'ing unwanted commands, or using <config_cmd_default.h> |
602ad3b33 README: Rewrite c... |
841 842 843 844 845 846 847 |
and augmenting with additional #define's for wanted commands. The default command configuration includes all commands except those marked below with a "*". CONFIG_CMD_ASKENV * ask for env variable |
602ad3b33 README: Rewrite c... |
848 849 850 851 852 853 |
CONFIG_CMD_BDI bdinfo CONFIG_CMD_BEDBUG * Include BedBug Debugger CONFIG_CMD_BMP * BMP support CONFIG_CMD_BSP * Board specific commands CONFIG_CMD_BOOTD bootd CONFIG_CMD_CACHE * icache, dcache |
08d0d6f32 common: Add new c... |
854 |
CONFIG_CMD_CLK * clock command support |
602ad3b33 README: Rewrite c... |
855 |
CONFIG_CMD_CONSOLE coninfo |
710b99385 crc32: make comma... |
856 |
CONFIG_CMD_CRC32 * crc32 |
602ad3b33 README: Rewrite c... |
857 858 859 |
CONFIG_CMD_DATE * support for RTC, date/time... CONFIG_CMD_DHCP * DHCP support CONFIG_CMD_DIAG * Diagnostics |
a7c931045 Add support for M... |
860 861 862 863 |
CONFIG_CMD_DS4510 * ds4510 I2C gpio commands CONFIG_CMD_DS4510_INFO * ds4510 I2C info command CONFIG_CMD_DS4510_MEM * ds4510 I2C eeprom/sram commansd CONFIG_CMD_DS4510_RST * ds4510 I2C rst command |
602ad3b33 README: Rewrite c... |
864 865 |
CONFIG_CMD_DTT * Digital Therm and Thermostat CONFIG_CMD_ECHO echo arguments |
246c69225 Add 'editenv' com... |
866 |
CONFIG_CMD_EDITENV edit env variable |
602ad3b33 README: Rewrite c... |
867 868 |
CONFIG_CMD_EEPROM * EEPROM read/write support CONFIG_CMD_ELF * bootelf, bootvx |
5e2b3e0c5 env: Add a comman... |
869 |
CONFIG_CMD_ENV_CALLBACK * display details about env callbacks |
fffad71bc env: Add a comman... |
870 |
CONFIG_CMD_ENV_FLAGS * display details about env flags |
88733e2c6 cmd_nvedit.c: Add... |
871 |
CONFIG_CMD_ENV_EXISTS * check existence of env variable |
0c79cda01 env: make import/... |
872 |
CONFIG_CMD_EXPORTENV * export the environment |
03e2ecf6b fs: separate CONF... |
873 874 |
CONFIG_CMD_EXT2 * ext2 command support CONFIG_CMD_EXT4 * ext4 command support |
16f4d9335 README: document ... |
875 876 |
CONFIG_CMD_FS_GENERIC * filesystem commands (e.g. load, ls) that work for multiple fs types |
bdab39d35 rename CONFIG_CMD... |
877 |
CONFIG_CMD_SAVEENV saveenv |
602ad3b33 README: Rewrite c... |
878 |
CONFIG_CMD_FDC * Floppy Disk Support |
03e2ecf6b fs: separate CONF... |
879 |
CONFIG_CMD_FAT * FAT command support |
602ad3b33 README: Rewrite c... |
880 881 |
CONFIG_CMD_FLASH flinfo, erase, protect CONFIG_CMD_FPGA FPGA device initialization support |
4d98b5c8a README: align def... |
882 |
CONFIG_CMD_FUSE * Device fuse support |
53fdc7ef2 Add gettime command |
883 |
CONFIG_CMD_GETTIME * Get time since boot |
a641b9794 make `go` optional |
884 |
CONFIG_CMD_GO * the 'go' command (exec code) |
a000b7950 common: add a gre... |
885 |
CONFIG_CMD_GREPENV * search environment |
bf36c5d52 Add hash command ... |
886 |
CONFIG_CMD_HASH * calculate hash / digest |
602ad3b33 README: Rewrite c... |
887 888 889 890 |
CONFIG_CMD_HWFLOW * RTS/CTS hw flow control CONFIG_CMD_I2C * I2C serial bus support CONFIG_CMD_IDE * IDE harddisk support CONFIG_CMD_IMI iminfo |
8fdf1e0f6 imls: Add support... |
891 |
CONFIG_CMD_IMLS List all images found in NOR flash |
4d98b5c8a README: align def... |
892 |
CONFIG_CMD_IMLS_NAND * List all images found in NAND flash |
602ad3b33 README: Rewrite c... |
893 |
CONFIG_CMD_IMMAP * IMMR dump support |
0c79cda01 env: make import/... |
894 |
CONFIG_CMD_IMPORTENV * import an environment |
c167cc020 Add a new "ini" c... |
895 |
CONFIG_CMD_INI * import data from an ini file into the env |
602ad3b33 README: Rewrite c... |
896 897 898 899 |
CONFIG_CMD_IRQ * irqinfo CONFIG_CMD_ITEST Integer/string test of 2 values CONFIG_CMD_JFFS2 * JFFS2 Support CONFIG_CMD_KGDB * kgdb |
4d98b5c8a README: align def... |
900 |
CONFIG_CMD_LDRINFO * ldrinfo (display Blackfin loader) |
d22c338e0 net: Add link-loc... |
901 902 |
CONFIG_CMD_LINK_LOCAL * link-local IP address auto-configuration (169.254.*.*) |
602ad3b33 README: Rewrite c... |
903 904 |
CONFIG_CMD_LOADB loadb CONFIG_CMD_LOADS loads |
4d98b5c8a README: align def... |
905 |
CONFIG_CMD_MD5SUM * print md5 message digest |
02c9aa1d4 Add md5sum and sh... |
906 |
(requires CONFIG_CMD_MEMORY and CONFIG_MD5) |
15a33e49d Add option to dis... |
907 |
CONFIG_CMD_MEMINFO * Display detailed memory information |
602ad3b33 README: Rewrite c... |
908 |
CONFIG_CMD_MEMORY md, mm, nm, mw, cp, cmp, crc, base, |
a2681707b Feature Removal: ... |
909 |
loop, loopw |
4d98b5c8a README: align def... |
910 |
CONFIG_CMD_MEMTEST * mtest |
602ad3b33 README: Rewrite c... |
911 912 913 |
CONFIG_CMD_MISC Misc functions like sleep etc CONFIG_CMD_MMC * MMC memory mapped support CONFIG_CMD_MII * MII utility commands |
68d7d6510 Separate mtdparts... |
914 |
CONFIG_CMD_MTDPARTS * MTD partition support |
602ad3b33 README: Rewrite c... |
915 916 |
CONFIG_CMD_NAND * NAND support CONFIG_CMD_NET bootp, tftpboot, rarpboot |
4d98b5c8a README: align def... |
917 |
CONFIG_CMD_NFS NFS support |
e92739d34 Add support for P... |
918 |
CONFIG_CMD_PCA953X * PCA953x I2C gpio commands |
c0f40859f README: white-spa... |
919 |
CONFIG_CMD_PCA953X_INFO * PCA953x I2C gpio info command |
602ad3b33 README: Rewrite c... |
920 921 922 923 924 |
CONFIG_CMD_PCI * pciinfo CONFIG_CMD_PCMCIA * PCMCIA support CONFIG_CMD_PING * send ICMP ECHO_REQUEST to network host CONFIG_CMD_PORTIO * Port I/O |
ff048ea91 Add a command to ... |
925 |
CONFIG_CMD_READ * Read raw data from partition |
602ad3b33 README: Rewrite c... |
926 927 |
CONFIG_CMD_REGINFO * Register dump CONFIG_CMD_RUN run command in env variable |
d304931f2 sandbox: Add 'sb'... |
928 |
CONFIG_CMD_SANDBOX * sb command to access sandbox features |
602ad3b33 README: Rewrite c... |
929 930 931 932 933 934 |
CONFIG_CMD_SAVES * save S record dump CONFIG_CMD_SCSI * SCSI Support CONFIG_CMD_SDRAM * print SDRAM configuration information (requires CONFIG_CMD_I2C) CONFIG_CMD_SETGETDCR Support for DCR Register access (4xx only) |
f61ec45eb README: Add descr... |
935 |
CONFIG_CMD_SF * Read/write/erase SPI NOR flash |
4d98b5c8a README: align def... |
936 |
CONFIG_CMD_SHA1SUM * print sha1 memory digest |
02c9aa1d4 Add md5sum and sh... |
937 |
(requires CONFIG_CMD_MEMORY) |
7d861d95a blackfin: bf609: ... |
938 |
CONFIG_CMD_SOFTSWITCH * Soft switch setting command for BF60x |
74de7aefd Add "source" comm... |
939 |
CONFIG_CMD_SOURCE "source" command Support |
602ad3b33 README: Rewrite c... |
940 |
CONFIG_CMD_SPI * SPI serial bus support |
7a83af07a TFTP: add tftpsrv... |
941 |
CONFIG_CMD_TFTPSRV * TFTP transfer in server mode |
1fb7cd498 net: tftpput: imp... |
942 |
CONFIG_CMD_TFTPPUT * TFTP put command (upload) |
da83bcd7b Add a command to ... |
943 944 |
CONFIG_CMD_TIME * run command and report execution time (ARM specific) CONFIG_CMD_TIMER * access to the system tick timer |
602ad3b33 README: Rewrite c... |
945 |
CONFIG_CMD_USB * USB support |
602ad3b33 README: Rewrite c... |
946 |
CONFIG_CMD_CDP * Cisco Discover Protocol support |
c8339f515 CMD: Fix typo CMD... |
947 |
CONFIG_CMD_MFSL * Microblaze FSL support |
4d98b5c8a README: align def... |
948 |
CONFIG_CMD_XIMG Load part of Multi Image |
89c8230de new commands: uui... |
949 |
CONFIG_CMD_UUID * Generate random UUID or GUID string |
c609719b8 Initial revision |
950 951 952 |
EXAMPLE: If you want all functions except of network support you can write: |
602ad3b33 README: Rewrite c... |
953 954 |
#include "config_cmd_all.h" #undef CONFIG_CMD_NET |
c609719b8 Initial revision |
955 |
|
213bf8c82 Add a flattened d... |
956 957 |
Other Commands: fdt (flattened device tree) command: CONFIG_OF_LIBFDT |
c609719b8 Initial revision |
958 959 |
Note: Don't enable the "icache" and "dcache" commands |
602ad3b33 README: Rewrite c... |
960 |
(configuration option CONFIG_CMD_CACHE) unless you know |
43d9616cf * Patch by Robert... |
961 962 963 964 965 966 |
what you (and your U-Boot users) are doing. Data cache cannot be enabled on systems like the 8xx or 8260 (where accesses to the IMMR region must be uncached), and it cannot be disabled on all other systems where we (mis-) use the data cache to hold an initial stack and some data. |
c609719b8 Initial revision |
967 968 969 |
XXX - this list needs to get updated! |
a5ecbe62c Add SLRE - Super ... |
970 971 |
- Regular expression support: CONFIG_REGEX |
93e145964 Coding Style clea... |
972 973 974 975 |
If this variable is defined, U-Boot is linked against the SLRE (Super Light Regular Expression) library, which adds regex support to some commands, as for example "env grep" and "setexpr". |
a5ecbe62c Add SLRE - Super ... |
976 |
|
45ba8077f fdt: ARM: Add dev... |
977 978 979 980 981 982 983 |
- Device tree: CONFIG_OF_CONTROL If this variable is defined, U-Boot will use a device tree to configure its devices, instead of relying on statically compiled #defines in the board file. This option is experimental and only available on a few boards. The device tree is available in the global data as gd->fdt_blob. |
2c0f79e44 fdt: Add support ... |
984 985 |
U-Boot needs to get its device tree from somewhere. This can be done using one of the two options below: |
bbb0b128c fdt: Add support ... |
986 987 988 989 990 991 992 |
CONFIG_OF_EMBED If this variable is defined, U-Boot will embed a device tree binary in its image. This device tree file should be in the board directory and called <soc>-<board>.dts. The binary file is then picked up in board_init_f() and made available through the global data structure as gd->blob. |
45ba8077f fdt: ARM: Add dev... |
993 |
|
2c0f79e44 fdt: Add support ... |
994 995 996 997 998 999 1000 1001 1002 1003 1004 |
CONFIG_OF_SEPARATE If this variable is defined, U-Boot will build a device tree binary. It will be called u-boot.dtb. Architecture-specific code will locate it at run-time. Generally this works by: cat u-boot.bin u-boot.dtb >image.bin and in fact, U-Boot does this for you, creating a file called u-boot-dtb.bin which is useful in the common case. You can still use the individual files if you need something more exotic. |
c609719b8 Initial revision |
1005 1006 1007 |
- Watchdog: CONFIG_WATCHDOG If this variable is defined, it enables watchdog |
6abe6fb68 README: Clarify d... |
1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 |
support for the SoC. There must be support in the SoC specific code for a watchdog. For the 8xx and 8260 CPUs, the SIU Watchdog feature is enabled in the SYPCR register. When supported for a specific SoC is available, then no further board specific code should be needed to use it. CONFIG_HW_WATCHDOG When using a watchdog circuitry external to the used SoC, then define this variable and provide board specific code for the "hw_watchdog_reset" function. |
c609719b8 Initial revision |
1019 |
|
c1551ea81 U-Boot version en... |
1020 1021 1022 1023 1024 |
- U-Boot Version: CONFIG_VERSION_VARIABLE If this variable is defined, an environment variable named "ver" is created by U-Boot showing the U-Boot version as printed by the "version" command. |
a1ea8e510 README: Update ve... |
1025 1026 |
Any change to this variable will be reverted at the next reset. |
c1551ea81 U-Boot version en... |
1027 |
|
c609719b8 Initial revision |
1028 |
- Real-Time Clock: |
602ad3b33 README: Rewrite c... |
1029 |
When CONFIG_CMD_DATE is selected, the type of the RTC |
c609719b8 Initial revision |
1030 1031 1032 1033 1034 |
has to be selected, too. Define exactly one of the following options: CONFIG_RTC_MPC8xx - use internal RTC of MPC8xx CONFIG_RTC_PCF8563 - use Philips PCF8563 RTC |
4e8b7544b rtc: Make mc13783... |
1035 |
CONFIG_RTC_MC13XXX - use MC13783 or MC13892 RTC |
c609719b8 Initial revision |
1036 |
CONFIG_RTC_MC146818 - use MC146818 RTC |
1cb8e980c * Patches by Davi... |
1037 |
CONFIG_RTC_DS1307 - use Maxim, Inc. DS1307 RTC |
c609719b8 Initial revision |
1038 |
CONFIG_RTC_DS1337 - use Maxim, Inc. DS1337 RTC |
7f70e8530 * Patch by David ... |
1039 |
CONFIG_RTC_DS1338 - use Maxim, Inc. DS1338 RTC |
3bac35137 * Patch by Josef ... |
1040 |
CONFIG_RTC_DS164x - use Dallas DS164x RTC |
9536dfcce Add support for I... |
1041 |
CONFIG_RTC_ISL1208 - use Intersil ISL1208 RTC |
4c0d4c3b7 * Patch by Tom Ar... |
1042 |
CONFIG_RTC_MAX6900 - use Maxim, Inc. MAX6900 RTC |
6d0f6bcf3 rename CFG_ macro... |
1043 |
CONFIG_SYS_RTC_DS1337_NOOSC - Turn off the OSC output for DS1337 |
71d19f30d rtc, rv3029: add ... |
1044 1045 |
CONFIG_SYS_RV3029_TCR - enable trickle charger on RV3029 RTC. |
c609719b8 Initial revision |
1046 |
|
b37c7e5e5 * Patch by Seb Ja... |
1047 1048 |
Note that if the RTC uses I2C, then the I2C interface must also be configured. See I2C Support, below. |
e92739d34 Add support for P... |
1049 1050 |
- GPIO Support: CONFIG_PCA953X - use NXP's PCA953X series I2C GPIO |
e92739d34 Add support for P... |
1051 |
|
5dec49ca2 pca953x: support ... |
1052 1053 1054 |
The CONFIG_SYS_I2C_PCA953X_WIDTH option specifies a list of chip-ngpio pairs that tell the PCA953X driver the number of pins supported by a particular chip. |
e92739d34 Add support for P... |
1055 1056 |
Note that if the GPIO device uses I2C, then the I2C interface must also be configured. See I2C Support, below. |
c609719b8 Initial revision |
1057 |
- Timestamp Support: |
43d9616cf * Patch by Robert... |
1058 1059 1060 |
When CONFIG_TIMESTAMP is selected, the timestamp (date and time) of an image is printed by image commands like bootm or iminfo. This option is |
602ad3b33 README: Rewrite c... |
1061 |
automatically enabled when you select CONFIG_CMD_DATE . |
c609719b8 Initial revision |
1062 |
|
923c46f97 README: Cleanup d... |
1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 |
- Partition Labels (disklabels) Supported: Zero or more of the following: CONFIG_MAC_PARTITION Apple's MacOS partition table. CONFIG_DOS_PARTITION MS Dos partition table, traditional on the Intel architecture, USB sticks, etc. CONFIG_ISO_PARTITION ISO partition table, used on CDROM etc. CONFIG_EFI_PARTITION GPT partition table, common when EFI is the bootloader. Note 2TB partition limit; see disk/part_efi.c CONFIG_MTD_PARTITIONS Memory Technology Device partition table. |
c609719b8 Initial revision |
1073 |
|
218ca724c README: update do... |
1074 1075 |
If IDE or SCSI support is enabled (CONFIG_CMD_IDE or CONFIG_CMD_SCSI) you must configure support for at |
923c46f97 README: Cleanup d... |
1076 |
least one non-MTD partition type as well. |
c609719b8 Initial revision |
1077 1078 |
- IDE Reset method: |
4d13cbad1 * Patch by Toluna... |
1079 1080 |
CONFIG_IDE_RESET_ROUTINE - this is defined in several board configurations files but used nowhere! |
c609719b8 Initial revision |
1081 |
|
4d13cbad1 * Patch by Toluna... |
1082 1083 1084 1085 |
CONFIG_IDE_RESET - is this is defined, IDE Reset will be performed by calling the function ide_set_reset(int reset) which has to be defined in a board specific file |
c609719b8 Initial revision |
1086 1087 1088 1089 1090 |
- ATAPI Support: CONFIG_ATAPI Set this to enable ATAPI support. |
c40b29568 * Patch by Rune T... |
1091 1092 1093 1094 |
- LBA48 Support CONFIG_LBA48 Set this to enable support for disks larger than 137GB |
4b142febf common: delete CO... |
1095 |
Also look at CONFIG_SYS_64BIT_LBA. |
c40b29568 * Patch by Rune T... |
1096 1097 |
Whithout these , LBA48 support uses 32bit variables and will 'only' support disks up to 2.1TB. |
6d0f6bcf3 rename CFG_ macro... |
1098 |
CONFIG_SYS_64BIT_LBA: |
c40b29568 * Patch by Rune T... |
1099 1100 |
When enabled, makes the IDE subsystem use 64bit sector addresses. Default is 32bit. |
c609719b8 Initial revision |
1101 1102 1103 1104 |
- SCSI Support: At the moment only there is only support for the SYM53C8XX SCSI controller; define CONFIG_SCSI_SYM53C8XX to enable it. |
6d0f6bcf3 rename CFG_ macro... |
1105 1106 1107 |
CONFIG_SYS_SCSI_MAX_LUN [8], CONFIG_SYS_SCSI_MAX_SCSI_ID [7] and CONFIG_SYS_SCSI_MAX_DEVICE [CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN] can be adjusted to define the |
c609719b8 Initial revision |
1108 1109 |
maximum numbers of LUNs, SCSI ID's and target devices. |
6d0f6bcf3 rename CFG_ macro... |
1110 |
CONFIG_SYS_SCSI_SYM53C8XX_CCF to fix clock timing (80Mhz) |
c609719b8 Initial revision |
1111 |
|
93e145964 Coding Style clea... |
1112 1113 |
The environment variable 'scsidevs' is set to the number of SCSI devices found during the last scan. |
447c031ba scsi: Add functio... |
1114 |
|
c609719b8 Initial revision |
1115 |
- NETWORK Support (PCI): |
682011ff6 * Patches by Udi ... |
1116 |
CONFIG_E1000 |
ce5207e19 e1000: Allow dire... |
1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 |
Support for Intel 8254x/8257x gigabit chips. CONFIG_E1000_SPI Utility code for direct access to the SPI bus on Intel 8257x. This does not do anything useful unless you set at least one of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC. CONFIG_E1000_SPI_GENERIC Allow generic access to the SPI bus on the Intel 8257x, for example with the "sspi" command. CONFIG_CMD_E1000 Management command for E1000 devices. When used on devices with SPI support you can reprogram the EEPROM from U-Boot. |
53cf9435c - CFG_RX_ETH_BUFF... |
1131 |
|
ac3315c26 new PHY @ e1000 -... |
1132 |
CONFIG_E1000_FALLBACK_MAC |
11ccc33fa Many spelling fix... |
1133 |
default MAC for empty EEPROM after production. |
ac3315c26 new PHY @ e1000 -... |
1134 |
|
c609719b8 Initial revision |
1135 1136 |
CONFIG_EEPRO100 Support for Intel 82557/82559/82559ER chips. |
11ccc33fa Many spelling fix... |
1137 |
Optional CONFIG_EEPRO100_SROM_WRITE enables EEPROM |
c609719b8 Initial revision |
1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 |
write routine for first time initialisation. CONFIG_TULIP Support for Digital 2114x chips. Optional CONFIG_TULIP_SELECT_MEDIA for board specific modem chip initialisation (KS8761/QS6611). CONFIG_NATSEMI Support for National dp83815 chips. CONFIG_NS8382X Support for National dp8382[01] gigabit chips. |
45219c466 Patch by Mathijs ... |
1150 |
- NETWORK Support (other): |
c041e9d21 new at91_emac net... |
1151 1152 1153 1154 1155 1156 1157 1158 1159 |
CONFIG_DRIVER_AT91EMAC Support for AT91RM9200 EMAC. CONFIG_RMII Define this to use reduced MII inteface CONFIG_DRIVER_AT91EMAC_QUIET If this defined, the driver is quiet. The driver doen't show link status messages. |
efdd73195 net: add Calxeda ... |
1160 1161 |
CONFIG_CALXEDA_XGMAC Support for the Calxeda XGMAC device |
3bb46d23f README : Rename C... |
1162 |
CONFIG_LAN91C96 |
45219c466 Patch by Mathijs ... |
1163 1164 1165 1166 1167 1168 1169 1170 |
Support for SMSC's LAN91C96 chips. CONFIG_LAN91C96_BASE Define this to hold the physical address of the LAN91C96's I/O space CONFIG_LAN91C96_USE_32_BIT Define this to enable 32 bit addressing |
3bb46d23f README : Rename C... |
1171 |
CONFIG_SMC91111 |
f39748ae8 * Patch by Paul R... |
1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 |
Support for SMSC's LAN91C111 chip CONFIG_SMC91111_BASE Define this to hold the physical address of the device (I/O space) CONFIG_SMC_USE_32_BIT Define this if data bus is 32 bits CONFIG_SMC_USE_IOFUNCS Define this to use i/o functions instead of macros (some hardware wont work with macros) |
dc02badab arm, davinci_emac... |
1184 1185 1186 1187 1188 |
CONFIG_DRIVER_TI_EMAC Support for davinci emac CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT Define this if you have more then 3 PHYs. |
b3dbf4a51 ftgmac100: suppor... |
1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 |
CONFIG_FTGMAC100 Support for Faraday's FTGMAC100 Gigabit SoC Ethernet CONFIG_FTGMAC100_EGIGA Define this to use GE link update with gigabit PHY. Define this if FTGMAC100 is connected to gigabit PHY. If your system has 10/100 PHY only, it might not occur wrong behavior. Because PHY usually return timeout or useless data when polling gigabit status and gigabit control registers. This behavior won't affect the correctnessof 10/100 link speed update. |
c2fff331a smc911x: update S... |
1200 |
CONFIG_SMC911X |
557b377d8 smc911x: add 16 b... |
1201 |
Support for SMSC's LAN911x and LAN921x chips |
c2fff331a smc911x: update S... |
1202 |
CONFIG_SMC911X_BASE |
557b377d8 smc911x: add 16 b... |
1203 1204 |
Define this to hold the physical address of the device (I/O space) |
c2fff331a smc911x: update S... |
1205 |
CONFIG_SMC911X_32_BIT |
557b377d8 smc911x: add 16 b... |
1206 |
Define this if data bus is 32 bits |
c2fff331a smc911x: update S... |
1207 |
CONFIG_SMC911X_16_BIT |
557b377d8 smc911x: add 16 b... |
1208 1209 |
Define this if data bus is 16 bits. If your processor automatically converts one 32 bit word to two 16 bit |
c2fff331a smc911x: update S... |
1210 |
words you may also try CONFIG_SMC911X_32_BIT. |
557b377d8 smc911x: add 16 b... |
1211 |
|
3d0075fa7 README: add descr... |
1212 1213 1214 1215 1216 1217 1218 1219 |
CONFIG_SH_ETHER Support for Renesas on-chip Ethernet controller CONFIG_SH_ETHER_USE_PORT Define the number of ports to be used CONFIG_SH_ETHER_PHY_ADDR Define the ETH PHY's address |
68260aab9 net: sh_eth: add ... |
1220 1221 |
CONFIG_SH_ETHER_CACHE_WRITEBACK If this option is set, the driver enables cache flush. |
5e1247247 Introduce generic... |
1222 |
- TPM Support: |
90899cc01 tpm: Rename gener... |
1223 1224 |
CONFIG_TPM Support TPM devices. |
1b393db58 tpm: Reorganize t... |
1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 |
CONFIG_TPM_TIS_I2C Support for i2c bus TPM devices. Only one device per system is supported at this time. CONFIG_TPM_TIS_I2C_BUS_NUMBER Define the the i2c bus number for the TPM device CONFIG_TPM_TIS_I2C_SLAVE_ADDRESS Define the TPM's address on the i2c bus CONFIG_TPM_TIS_I2C_BURST_LIMITATION Define the burst count bytes upper limit |
c01939c76 Add Atmel I2C tpm |
1237 1238 |
CONFIG_TPM_ATMEL_TWI Support for Atmel TWI TPM device. Requires I2C support. |
90899cc01 tpm: Rename gener... |
1239 |
CONFIG_TPM_TIS_LPC |
5e1247247 Introduce generic... |
1240 1241 1242 1243 1244 1245 1246 |
Support for generic parallel port TPM devices. Only one device per system is supported at this time. CONFIG_TPM_TIS_BASE_ADDRESS Base address where the generic TPM device is mapped to. Contemporary x86 systems usually map it at 0xfed40000. |
be6c1529c tpm: add AUTH1 cm... |
1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 |
CONFIG_CMD_TPM Add tpm monitor functions. Requires CONFIG_TPM. If CONFIG_TPM_AUTH_SESSIONS is set, also provides monitor access to authorized functions. CONFIG_TPM Define this to enable the TPM support library which provides functional interfaces to some TPM commands. Requires support for a TPM device. CONFIG_TPM_AUTH_SESSIONS Define this to enable authorized functions in the TPM library. Requires CONFIG_TPM and CONFIG_SHA1. |
c609719b8 Initial revision |
1260 1261 |
- USB Support: At the moment only the UHCI host controller is |
4d13cbad1 * Patch by Toluna... |
1262 |
supported (PIP405, MIP405, MPC5200); define |
c609719b8 Initial revision |
1263 1264 |
CONFIG_USB_UHCI to enable it. define CONFIG_USB_KEYBOARD to enable the USB Keyboard |
30d56fae2 Patch by Sam Song... |
1265 |
and define CONFIG_USB_STORAGE to enable the USB |
c609719b8 Initial revision |
1266 1267 1268 1269 |
storage devices. Note: Supported are USB Keyboards and USB Floppy drives (TEAC FD-05PUB). |
4d13cbad1 * Patch by Toluna... |
1270 1271 1272 |
MPC5200 USB requires additional defines: CONFIG_USB_CLOCK for 528 MHz Clock: 0x0001bbbb |
307ecb6db Add support for U... |
1273 1274 |
CONFIG_PSC3_USB for USB on PSC3 |
4d13cbad1 * Patch by Toluna... |
1275 1276 1277 |
CONFIG_USB_CONFIG for differential drivers: 0x00001000 for single ended drivers: 0x00005000 |
307ecb6db Add support for U... |
1278 1279 |
for differential drivers on PSC3: 0x00000100 for single ended drivers on PSC3: 0x00004100 |
6d0f6bcf3 rename CFG_ macro... |
1280 |
CONFIG_SYS_USB_EVENT_POLL |
fdcfaa1b0 USB event poll su... |
1281 1282 |
May be defined to allow interrupt polling instead of using asynchronous interrupts |
4d13cbad1 * Patch by Toluna... |
1283 |
|
9ab4ce223 usb: Add support ... |
1284 1285 |
CONFIG_USB_EHCI_TXFIFO_THRESH enables setting of the txfilltuning field in the EHCI controller on reset. |
aa1550588 usb: hub: make mi... |
1286 1287 |
CONFIG_USB_HUB_MIN_POWER_ON_DELAY defines the minimum interval for usb hub power-on delay.(minimum 100msec) |
16c8d5e76 Various USB relat... |
1288 1289 1290 1291 |
- USB Device: Define the below if you wish to use the USB console. Once firmware is rebuilt from a serial console issue the command "setenv stdin usbtty; setenv stdout usbtty" and |
11ccc33fa Many spelling fix... |
1292 |
attach your USB cable. The Unix command "dmesg" should print |
16c8d5e76 Various USB relat... |
1293 1294 |
it has found a new device. The environment variable usbtty can be set to gserial or cdc_acm to enable your device to |
386eda022 Code cleanup |
1295 |
appear to a USB host as a Linux gserial device or a |
16c8d5e76 Various USB relat... |
1296 1297 1298 1299 1300 1301 1302 |
Common Device Class Abstract Control Model serial device. If you select usbtty = gserial you should be able to enumerate a Linux host by # modprobe usbserial vendor=0xVendorID product=0xProductID else if using cdc_acm, simply setting the environment variable usbtty to be cdc_acm should suffice. The following might be defined in YourBoardName.h |
386eda022 Code cleanup |
1303 |
|
16c8d5e76 Various USB relat... |
1304 1305 1306 1307 1308 1309 |
CONFIG_USB_DEVICE Define this to build a UDC device CONFIG_USB_TTY Define this to have a tty type of device available to talk to the UDC device |
386eda022 Code cleanup |
1310 |
|
f9da0f894 Enable high speed... |
1311 1312 1313 1314 1315 1316 1317 |
CONFIG_USBD_HS Define this to enable the high speed support for usb device and usbtty. If this feature is enabled, a routine int is_usbd_high_speed(void) also needs to be defined by the driver to dynamically poll whether the enumeration has succeded at high speed or full speed. |
6d0f6bcf3 rename CFG_ macro... |
1318 |
CONFIG_SYS_CONSOLE_IS_IN_ENV |
16c8d5e76 Various USB relat... |
1319 1320 1321 1322 |
Define this if you want stdin, stdout &/or stderr to be set to usbtty. mpc8xx: |
6d0f6bcf3 rename CFG_ macro... |
1323 |
CONFIG_SYS_USB_EXTC_CLK 0xBLAH |
16c8d5e76 Various USB relat... |
1324 |
Derive USB clock from external clock "blah" |
6d0f6bcf3 rename CFG_ macro... |
1325 |
- CONFIG_SYS_USB_EXTC_CLK 0x02 |
386eda022 Code cleanup |
1326 |
|
6d0f6bcf3 rename CFG_ macro... |
1327 |
CONFIG_SYS_USB_BRG_CLK 0xBLAH |
16c8d5e76 Various USB relat... |
1328 |
Derive USB clock from brgclk |
6d0f6bcf3 rename CFG_ macro... |
1329 |
- CONFIG_SYS_USB_BRG_CLK 0x04 |
16c8d5e76 Various USB relat... |
1330 |
|
386eda022 Code cleanup |
1331 |
If you have a USB-IF assigned VendorID then you may wish to |
16c8d5e76 Various USB relat... |
1332 |
define your own vendor specific values either in BoardName.h |
386eda022 Code cleanup |
1333 |
or directly in usbd_vendor_info.h. If you don't define |
16c8d5e76 Various USB relat... |
1334 1335 1336 1337 1338 1339 1340 |
CONFIG_USBD_MANUFACTURER, CONFIG_USBD_PRODUCT_NAME, CONFIG_USBD_VENDORID and CONFIG_USBD_PRODUCTID, then U-Boot should pretend to be a Linux device to it's target host. CONFIG_USBD_MANUFACTURER Define this string as the name of your company for - CONFIG_USBD_MANUFACTURER "my company" |
386eda022 Code cleanup |
1341 |
|
16c8d5e76 Various USB relat... |
1342 1343 1344 1345 1346 1347 1348 1349 1350 |
CONFIG_USBD_PRODUCT_NAME Define this string as the name of your product - CONFIG_USBD_PRODUCT_NAME "acme usb device" CONFIG_USBD_VENDORID Define this as your assigned Vendor ID from the USB Implementors Forum. This *must* be a genuine Vendor ID to avoid polluting the USB namespace. - CONFIG_USBD_VENDORID 0xFFFF |
386eda022 Code cleanup |
1351 |
|
16c8d5e76 Various USB relat... |
1352 1353 1354 1355 |
CONFIG_USBD_PRODUCTID Define this as the unique Product ID for your device - CONFIG_USBD_PRODUCTID 0xFFFF |
4d13cbad1 * Patch by Toluna... |
1356 |
|
351e9b206 usb: ums: add ums... |
1357 1358 1359 1360 1361 1362 |
Some USB device drivers may need to check USB cable attachment. In this case you can enable following config in BoardName.h: CONFIG_USB_CABLE_CHECK This enables function definition: - usb_cable_connected() in include/usb.h Implementation of this function is board-specific. |
d70a560fd README: add docum... |
1363 1364 1365 1366 1367 1368 1369 1370 |
- ULPI Layer Support: The ULPI (UTMI Low Pin (count) Interface) PHYs are supported via the generic ULPI layer. The generic layer accesses the ULPI PHY via the platform viewport, so you need both the genric layer and the viewport enabled. Currently only Chipidea/ARC based viewport is supported. To enable the ULPI layer support, define CONFIG_USB_ULPI and CONFIG_USB_ULPI_VIEWPORT in your board configuration file. |
6d365ea0a tegra20: add USB ... |
1371 1372 1373 |
If your ULPI phy needs a different reference clock than the standard 24 MHz then you have to define CONFIG_ULPI_REF_CLK to the appropriate value in Hz. |
c609719b8 Initial revision |
1374 |
|
71f951180 * Fix CONFIG_NET_... |
1375 |
- MMC Support: |
8bde7f776 * Code cleanup: |
1376 1377 1378 |
The MMC controller on the Intel PXA is supported. To enable this define CONFIG_MMC. The MMC can be accessed from the boot prompt by mapping the device |
71f951180 * Fix CONFIG_NET_... |
1379 |
to physical memory similar to flash. Command line is |
602ad3b33 README: Rewrite c... |
1380 1381 |
enabled with CONFIG_CMD_MMC. The MMC driver also works with the FAT fs. This is enabled with CONFIG_CMD_FAT. |
71f951180 * Fix CONFIG_NET_... |
1382 |
|
afb35666d mmc: sh_mmcif: ad... |
1383 1384 1385 1386 1387 1388 1389 1390 |
CONFIG_SH_MMCIF Support for Renesas on-chip MMCIF controller CONFIG_SH_MMCIF_ADDR Define the base address of MMCIF registers CONFIG_SH_MMCIF_CLK Define the clock frequency for MMCIF |
b3ba6e94b README: Document ... |
1391 1392 1393 1394 1395 1396 1397 1398 1399 1400 1401 1402 |
- USB Device Firmware Update (DFU) class support: CONFIG_DFU_FUNCTION This enables the USB portion of the DFU USB class CONFIG_CMD_DFU This enables the command "dfu" which is used to have U-Boot create a DFU class device via USB. This command requires that the "dfu_alt_info" environment variable be set and define the alt settings to expose to the host. CONFIG_DFU_MMC This enables support for exposing (e)MMC devices via DFU. |
c6631764c dfu: NAND specifi... |
1403 1404 |
CONFIG_DFU_NAND This enables support for exposing NAND devices via DFU. |
a9479f043 dfu: ram support |
1405 1406 1407 1408 1409 |
CONFIG_DFU_RAM This enables support for exposing RAM via DFU. Note: DFU spec refer to non-volatile memory usage, but allow usages beyond the scope of spec - here RAM usage, one that would help mostly the developer. |
e7e75c70c dfu: make data bu... |
1410 1411 1412 1413 1414 |
CONFIG_SYS_DFU_DATA_BUF_SIZE Dfu transfer uses a buffer before writing data to the raw storage device. Make the size (in bytes) of this buffer configurable. The size of this buffer is also configurable through the "dfu_bufsiz" environment variable. |
ea2453d56 dfu: Support larg... |
1415 1416 1417 1418 1419 1420 |
CONFIG_SYS_DFU_MAX_FILE_SIZE When updating files rather than the raw storage device, we use a static buffer to copy the file into and then write the buffer once we've been given the whole file. Define this to the maximum filesize (in bytes) for the buffer. Default is 4 MiB if undefined. |
001a83198 usb: dfu: introdu... |
1421 1422 1423 1424 1425 1426 1427 1428 1429 |
DFU_DEFAULT_POLL_TIMEOUT Poll timeout [ms], is the timeout a device can send to the host. The host must wait for this timeout before sending a subsequent DFU_GET_STATUS request to the device. DFU_MANIFEST_POLL_TIMEOUT Poll timeout [ms], which the device sends to the host when entering dfuMANIFEST state. Host waits this timeout, before sending again an USB request to the device. |
6705d81e9 * Patch by Andrea... |
1430 1431 1432 1433 |
- Journaling Flash filesystem support: CONFIG_JFFS2_NAND, CONFIG_JFFS2_NAND_OFF, CONFIG_JFFS2_NAND_SIZE, CONFIG_JFFS2_NAND_DEV Define these for a default partition on a NAND device |
6d0f6bcf3 rename CFG_ macro... |
1434 1435 |
CONFIG_SYS_JFFS2_FIRST_SECTOR, CONFIG_SYS_JFFS2_FIRST_BANK, CONFIG_SYS_JFFS2_NUM_BANKS |
6705d81e9 * Patch by Andrea... |
1436 |
Define these for a default partition on a NOR device |
6d0f6bcf3 rename CFG_ macro... |
1437 |
CONFIG_SYS_JFFS_CUSTOM_PART |
6705d81e9 * Patch by Andrea... |
1438 1439 1440 1441 |
Define this to create an own partition. You have to provide a function struct part_info* jffs2_part_info(int part_num) If you define only one JFFS2 partition you may also want to |
6d0f6bcf3 rename CFG_ macro... |
1442 |
#define CONFIG_SYS_JFFS_SINGLE_PART 1 |
6705d81e9 * Patch by Andrea... |
1443 1444 |
to disable the command chpart. This is the default when you have not defined a custom partition |
c30a15e59 FAT: Add FAT writ... |
1445 1446 |
- FAT(File Allocation Table) filesystem write function support: CONFIG_FAT_WRITE |
656f4c653 cmd_fat: add FAT ... |
1447 1448 1449 1450 1451 1452 |
Define this to enable support for saving memory data as a file in FAT formatted partition. This will also enable the command "fatwrite" enabling the user to write files to FAT. |
c30a15e59 FAT: Add FAT writ... |
1453 |
|
84cd93272 fs: Add a Coreboo... |
1454 1455 1456 1457 1458 1459 |
CBFS (Coreboot Filesystem) support CONFIG_CMD_CBFS Define this to enable support for reading from a Coreboot filesystem. Available commands are cbfsinit, cbfsinfo, cbfsls and cbfsload. |
c609719b8 Initial revision |
1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 |
- Keyboard Support: CONFIG_ISA_KEYBOARD Define this to enable standard (PC-Style) keyboard support CONFIG_I8042_KBD Standard PC keyboard driver with US (is default) and GERMAN key layout (switch via environment 'keymap=de') support. Export function i8042_kbd_init, i8042_tstc and i8042_getc for cfb_console. Supports cursor blinking. |
713cb6804 cros: adds cros_e... |
1471 1472 1473 1474 |
CONFIG_CROS_EC_KEYB Enables a Chrome OS keyboard using the CROS_EC interface. This uses CROS_EC to communicate with a second microcontroller which provides key scans on request. |
c609719b8 Initial revision |
1475 1476 1477 1478 1479 1480 1481 1482 1483 1484 1485 |
- Video support: CONFIG_VIDEO Define this to enable video support (for output to video). CONFIG_VIDEO_CT69000 Enable Chips & Technologies 69000 Video chip CONFIG_VIDEO_SMI_LYNXEM |
b79a11cc2 Code cleanup |
1486 |
Enable Silicon Motion SMI 712/710/810 Video chip. The |
eeb1b77b7 * Patch by Pierre... |
1487 1488 1489 |
video output is selected via environment 'videoout' (1 = LCD and 2 = CRT). If videoout is undefined, CRT is assumed. |
b79a11cc2 Code cleanup |
1490 |
For the CT69000 and SMI_LYNXEM drivers, videomode is |
11ccc33fa Many spelling fix... |
1491 |
selected via environment 'videomode'. Two different ways |
eeb1b77b7 * Patch by Pierre... |
1492 1493 |
are possible: - "videomode=num" 'num' is a standard LiLo mode numbers. |
6e5923851 * Cleanup, minor ... |
1494 |
Following standard modes are supported (* is default): |
eeb1b77b7 * Patch by Pierre... |
1495 1496 1497 1498 1499 1500 1501 1502 |
Colors 640x480 800x600 1024x768 1152x864 1280x1024 -------------+--------------------------------------------- 8 bits | 0x301* 0x303 0x305 0x161 0x307 15 bits | 0x310 0x313 0x316 0x162 0x319 16 bits | 0x311 0x314 0x317 0x163 0x31A 24 bits | 0x312 0x315 0x318 ? 0x31B -------------+--------------------------------------------- |
c609719b8 Initial revision |
1503 |
(i.e. setenv videomode 317; saveenv; reset;) |
b79a11cc2 Code cleanup |
1504 |
- "videomode=bootargs" all the video parameters are parsed |
7817cb208 fix comments with... |
1505 |
from the bootargs. (See drivers/video/videomodes.c) |
eeb1b77b7 * Patch by Pierre... |
1506 |
|
c1551ea81 U-Boot version en... |
1507 |
CONFIG_VIDEO_SED13806 |
43d9616cf * Patch by Robert... |
1508 |
Enable Epson SED13806 driver. This driver supports 8bpp |
a6c7ad2f6 * Fix startup pro... |
1509 1510 |
and 16bpp modes defined by CONFIG_VIDEO_SED13806_8BPP or CONFIG_VIDEO_SED13806_16BPP |
7d3053fbf powerpc: clean up... |
1511 |
CONFIG_FSL_DIU_FB |
04e5ae793 Minor coding styl... |
1512 |
Enable the Freescale DIU video driver. Reference boards for |
7d3053fbf powerpc: clean up... |
1513 1514 1515 1516 1517 1518 1519 1520 1521 1522 1523 |
SOCs that have a DIU should define this macro to enable DIU support, and should also define these other macros: CONFIG_SYS_DIU_ADDR CONFIG_VIDEO CONFIG_CMD_BMP CONFIG_CFB_CONSOLE CONFIG_VIDEO_SW_CURSOR CONFIG_VGA_AS_SINGLE_DEVICE CONFIG_VIDEO_LOGO CONFIG_VIDEO_BMP_LOGO |
ba8e76bd4 powerpc: use 'vid... |
1524 1525 1526 1527 |
The DIU driver will look for the 'video-mode' environment variable, and if defined, enable the DIU as a console during boot. See the documentation file README.video for a description of this variable. |
7d3053fbf powerpc: clean up... |
1528 |
|
058d59b08 x86: Build vga vi... |
1529 1530 1531 1532 1533 |
CONFIG_VIDEO_VGA Enable the VGA video / BIOS for x86. The alternative if you are using coreboot is to use the coreboot frame buffer driver. |
682011ff6 * Patches by Udi ... |
1534 |
- Keyboard Support: |
8bde7f776 * Code cleanup: |
1535 |
CONFIG_KEYBOARD |
682011ff6 * Patches by Udi ... |
1536 |
|
8bde7f776 * Code cleanup: |
1537 1538 1539 1540 |
Define this to enable a custom keyboard support. This simply calls drv_keyboard_init() which must be defined in your board-specific files. The only board using this so far is RBC823. |
a6c7ad2f6 * Fix startup pro... |
1541 |
|
c609719b8 Initial revision |
1542 1543 1544 1545 1546 |
- LCD Support: CONFIG_LCD Define this to enable LCD support (for output to LCD display); also select one of the supported displays by defining one of these: |
39cf48048 Add ATMEL LCD driver |
1547 1548 1549 |
CONFIG_ATMEL_LCD: HITACHI TX09D70VM1CCA, 3.5", 240x320. |
fd3103bb8 Add support for B... |
1550 |
CONFIG_NEC_NL6448AC33: |
c609719b8 Initial revision |
1551 |
|
fd3103bb8 Add support for B... |
1552 |
NEC NL6448AC33-18. Active, color, single scan. |
c609719b8 Initial revision |
1553 |
|
fd3103bb8 Add support for B... |
1554 |
CONFIG_NEC_NL6448BC20 |
c609719b8 Initial revision |
1555 |
|
fd3103bb8 Add support for B... |
1556 1557 1558 1559 1560 1561 |
NEC NL6448BC20-08. 6.5", 640x480. Active, color, single scan. CONFIG_NEC_NL6448BC33_54 NEC NL6448BC33-54. 10.4", 640x480. |
c609719b8 Initial revision |
1562 1563 1564 1565 1566 1567 1568 1569 1570 1571 1572 1573 1574 1575 1576 1577 1578 1579 1580 1581 1582 1583 1584 1585 1586 1587 1588 1589 |
Active, color, single scan. CONFIG_SHARP_16x9 Sharp 320x240. Active, color, single scan. It isn't 16x9, and I am not sure what it is. CONFIG_SHARP_LQ64D341 Sharp LQ64D341 display, 640x480. Active, color, single scan. CONFIG_HLD1045 HLD1045 display, 640x480. Active, color, single scan. CONFIG_OPTREX_BW Optrex CBL50840-2 NF-FW 99 22 M5 or Hitachi LMG6912RPFC-00T or Hitachi SP14Q002 320x240. Black & white. Normally display is black on white background; define |
6d0f6bcf3 rename CFG_ macro... |
1590 |
CONFIG_SYS_WHITE_ON_BLACK to get it inverted. |
c609719b8 Initial revision |
1591 |
|
676d319ef lcd: Add CONFIG_L... |
1592 1593 1594 1595 1596 1597 1598 |
CONFIG_LCD_ALIGNMENT Normally the LCD is page-aligned (tyically 4KB). If this is defined then the LCD will be aligned to this value instead. For ARM it is sometimes useful to use MMU_SECTION_SIZE here, since it is cheaper to change data cache settings on a per-section basis. |
0d89efef7 lcd: Add CONFIG_C... |
1599 1600 1601 1602 1603 1604 |
CONFIG_CONSOLE_SCROLL_LINES When the console need to be scrolled, this is the number of lines to scroll by. It defaults to 1. Increasing this makes the console jump but can help speed up operation when scrolling is slow. |
676d319ef lcd: Add CONFIG_L... |
1605 |
|
45d7f5251 lcd: Implement RL... |
1606 1607 1608 |
CONFIG_LCD_BMP_RLE8 Support drawing of RLE8-compressed bitmaps on the LCD. |
735987c5a edid: Add I2C com... |
1609 1610 1611 1612 |
CONFIG_I2C_EDID Enables an 'i2c edid' command which can read EDID information over I2C from an attached LCD display. |
7152b1d0b * Add support for... |
1613 |
- Splash Screen Support: CONFIG_SPLASH_SCREEN |
d791b1dc3 * Make sure Block... |
1614 |
|
8bde7f776 * Code cleanup: |
1615 1616 1617 |
If this option is set, the environment is checked for a variable "splashimage". If found, the usual display of logo, copyright and system information on the LCD |
e94d2cd9d * Fix "cls" comma... |
1618 |
is suppressed and the BMP image at the address |
8bde7f776 * Code cleanup: |
1619 1620 1621 1622 |
specified in "splashimage" is loaded instead. The console is redirected to the "nulldev", too. This allows for a "silent" boot where a splash screen is loaded very quickly after power-on. |
d791b1dc3 * Make sure Block... |
1623 |
|
c08804853 lcd: implement a ... |
1624 1625 1626 1627 |
CONFIG_SPLASHIMAGE_GUARD If this option is set, then U-Boot will prevent the environment variable "splashimage" from being set to a problematic address |
1551df35f arm: Switch to -m... |
1628 |
(see README.displaying-bmps). |
c08804853 lcd: implement a ... |
1629 1630 1631 1632 1633 |
This option is useful for targets where, due to alignment restrictions, an improperly aligned BMP image will cause a data abort. If you think you will not have problems with unaligned accesses (for example because your toolchain prevents them) there is no need to set this option. |
1ca298ced Added support for... |
1634 1635 1636 1637 1638 1639 1640 1641 1642 1643 1644 1645 1646 1647 1648 1649 1650 1651 1652 |
CONFIG_SPLASH_SCREEN_ALIGN If this option is set the splash image can be freely positioned on the screen. Environment variable "splashpos" specifies the position as "x,y". If a positive number is given it is used as number of pixel from left/top. If a negative number is given it is used as number of pixel from right/bottom. You can also specify 'm' for centering the image. Example: setenv splashpos m,m => image at center of screen setenv splashpos 30,20 => image at x = 30 and y = 20 setenv splashpos -10,m => vertically centered image at x = dspWidth - bmpWidth - 9 |
98f4a3dfc Add SM501 support... |
1653 1654 1655 1656 1657 |
- Gzip compressed BMP image support: CONFIG_VIDEO_BMP_GZIP If this option is set, additionally to standard BMP images, gzipped BMP images can be displayed via the splashscreen support or the bmp command. |
d5011762f video: cfb_consol... |
1658 1659 1660 1661 1662 |
- Run length encoded BMP image (RLE8) support: CONFIG_VIDEO_BMP_RLE8 If this option is set, 8-bit RLE compressed BMP images can be displayed via the splashscreen support or the bmp command. |
f2b96dfbb common: add zip c... |
1663 1664 1665 1666 1667 |
- Do compresssing for memory range: CONFIG_CMD_ZIP If this option is set, it would use zlib deflate method to compress the specified memory at its best effort. |
c29fdfc1d Patch by Yuli Bar... |
1668 |
- Compression support: |
8ef704784 documentation: ad... |
1669 1670 1671 |
CONFIG_GZIP Enabled by default to support gzip compressed images. |
c29fdfc1d Patch by Yuli Bar... |
1672 1673 1674 1675 1676 |
CONFIG_BZIP2 If this option is set, support for bzip2 compressed images is included. If not, only uncompressed and gzip compressed images are supported. |
42d1f0394 * Patches by Xian... |
1677 |
NOTE: the bzip2 algorithm requires a lot of RAM, so |
6d0f6bcf3 rename CFG_ macro... |
1678 |
the malloc area (as defined by CONFIG_SYS_MALLOC_LEN) should |
42d1f0394 * Patches by Xian... |
1679 |
be at least 4MB. |
d791b1dc3 * Make sure Block... |
1680 |
|
fc9c1727b Add support for L... |
1681 1682 1683 1684 1685 1686 1687 1688 1689 1690 1691 1692 1693 1694 1695 1696 1697 1698 1699 1700 1701 |
CONFIG_LZMA If this option is set, support for lzma compressed images is included. Note: The LZMA algorithm adds between 2 and 4KB of code and it requires an amount of dynamic memory that is given by the formula: (1846 + 768 << (lc + lp)) * sizeof(uint16) Where lc and lp stand for, respectively, Literal context bits and Literal pos bits. This value is upper-bounded by 14MB in the worst case. Anyway, for a ~4MB large kernel image, we have lc=3 and lp=0 for a total amount of (1846 + 768 << (3 + 0)) * 2 = ~41KB... that is a very small buffer. Use the lzmainfo tool to determinate the lc and lp values and then calculate the amount of needed dynamic memory (ensuring |
6d0f6bcf3 rename CFG_ macro... |
1702 |
the appropriate CONFIG_SYS_MALLOC_LEN value). |
fc9c1727b Add support for L... |
1703 |
|
8ef704784 documentation: ad... |
1704 1705 1706 1707 |
CONFIG_LZO If this option is set, support for LZO compressed images is included. |
17ea11774 Patch by Tolunay ... |
1708 1709 1710 1711 1712 1713 1714 1715 1716 1717 1718 1719 |
- MII/PHY support: CONFIG_PHY_ADDR The address of PHY on MII bus. CONFIG_PHY_CLOCK_FREQ (ppc4xx) The clock frequency of the MII bus CONFIG_PHY_GIGE If this option is set, support for speed/duplex |
11ccc33fa Many spelling fix... |
1720 |
detection of gigabit PHY is included. |
17ea11774 Patch by Tolunay ... |
1721 1722 1723 1724 1725 1726 1727 1728 1729 1730 1731 1732 |
CONFIG_PHY_RESET_DELAY Some PHY like Intel LXT971A need extra delay after reset before any MII register access is possible. For such PHY, set this option to the usec delay required. (minimum 300usec for LXT971A) CONFIG_PHY_CMD_DELAY (ppc4xx) Some PHY like Intel LXT971A need extra delay after command issued before MII status register can be read |
c609719b8 Initial revision |
1733 1734 |
- Ethernet address: CONFIG_ETHADDR |
c68a05fee Adds two more eth... |
1735 |
CONFIG_ETH1ADDR |
c609719b8 Initial revision |
1736 1737 |
CONFIG_ETH2ADDR CONFIG_ETH3ADDR |
c68a05fee Adds two more eth... |
1738 1739 |
CONFIG_ETH4ADDR CONFIG_ETH5ADDR |
c609719b8 Initial revision |
1740 |
|
11ccc33fa Many spelling fix... |
1741 1742 |
Define a default value for Ethernet address to use for the respective Ethernet interface, in case this |
c609719b8 Initial revision |
1743 1744 1745 1746 1747 1748 |
is not determined automatically. - IP address: CONFIG_IPADDR Define a default value for the IP address to use for |
11ccc33fa Many spelling fix... |
1749 |
the default Ethernet interface, in case this is not |
c609719b8 Initial revision |
1750 |
determined through e.g. bootp. |
1ebcd6547 README: improve d... |
1751 |
(Environment variable "ipaddr") |
c609719b8 Initial revision |
1752 1753 1754 |
- Server IP address: CONFIG_SERVERIP |
11ccc33fa Many spelling fix... |
1755 |
Defines a default value for the IP address of a TFTP |
c609719b8 Initial revision |
1756 |
server to contact when using the "tftboot" command. |
1ebcd6547 README: improve d... |
1757 |
(Environment variable "serverip") |
c609719b8 Initial revision |
1758 |
|
97cfe8616 Save server's MAC... |
1759 1760 1761 1762 |
CONFIG_KEEP_SERVERADDR Keeps the server's MAC address, in the env 'serveraddr' for passing to bootargs (like Linux's netconsole option) |
1ebcd6547 README: improve d... |
1763 1764 1765 1766 1767 1768 1769 1770 1771 1772 1773 1774 1775 1776 1777 1778 |
- Gateway IP address: CONFIG_GATEWAYIP Defines a default value for the IP address of the default router where packets to other networks are sent to. (Environment variable "gatewayip") - Subnet mask: CONFIG_NETMASK Defines a default value for the subnet mask (or routing prefix) which is used to determine if an IP address belongs to the local subnet or needs to be forwarded through a router. (Environment variable "netmask") |
53a5c424b multicast tftp: R... |
1779 1780 1781 1782 1783 |
- Multicast TFTP Mode: CONFIG_MCAST_TFTP Defines whether you want to support multicast TFTP as per rfc-2090; for example to work with atftp. Lets lots of targets |
11ccc33fa Many spelling fix... |
1784 |
tftp down the same boot image concurrently. Note: the Ethernet |
53a5c424b multicast tftp: R... |
1785 1786 |
driver in use must provide a function: mcast() to join/leave a multicast group. |
c609719b8 Initial revision |
1787 1788 1789 1790 1791 1792 1793 1794 1795 1796 1797 |
- BOOTP Recovery Mode: CONFIG_BOOTP_RANDOM_DELAY If you have many targets in a network that try to boot using BOOTP, you may want to avoid that all systems send out BOOTP requests at precisely the same moment (which would happen for instance at recovery from a power failure, when all systems will try to boot, thus flooding the BOOTP server. Defining CONFIG_BOOTP_RANDOM_DELAY causes a random delay to be inserted before sending out BOOTP requests. The |
6c33c7855 Fixed typo in REA... |
1798 |
following delays are inserted then: |
c609719b8 Initial revision |
1799 1800 1801 1802 1803 1804 |
1st BOOTP request: delay 0 ... 1 sec 2nd BOOTP request: delay 0 ... 2 sec 3rd BOOTP request: delay 0 ... 4 sec 4th and following BOOTP requests: delay 0 ... 8 sec |
fe389a82c - Added CONFIG_BO... |
1805 |
- DHCP Advanced Options: |
1fe80d79c Finally retire cm... |
1806 1807 1808 1809 1810 1811 1812 1813 1814 1815 1816 1817 1818 1819 1820 |
You can fine tune the DHCP functionality by defining CONFIG_BOOTP_* symbols: CONFIG_BOOTP_SUBNETMASK CONFIG_BOOTP_GATEWAY CONFIG_BOOTP_HOSTNAME CONFIG_BOOTP_NISDOMAIN CONFIG_BOOTP_BOOTPATH CONFIG_BOOTP_BOOTFILESIZE CONFIG_BOOTP_DNS CONFIG_BOOTP_DNS2 CONFIG_BOOTP_SEND_HOSTNAME CONFIG_BOOTP_NTPSERVER CONFIG_BOOTP_TIMEOFFSET CONFIG_BOOTP_VENDOREX |
2c00e099f net: Add option C... |
1821 |
CONFIG_BOOTP_MAY_FAIL |
fe389a82c - Added CONFIG_BO... |
1822 |
|
5d110f0aa New CONFIG_BOOTP_... |
1823 1824 |
CONFIG_BOOTP_SERVERIP - TFTP server will be the serverip environment variable, not the BOOTP server. |
fe389a82c - Added CONFIG_BO... |
1825 |
|
2c00e099f net: Add option C... |
1826 1827 1828 1829 1830 |
CONFIG_BOOTP_MAY_FAIL - If the DHCP server is not found after the configured retry count, the call will fail instead of starting over. This can be used to fail over to Link-local IP address configuration if the DHCP server is not available. |
fe389a82c - Added CONFIG_BO... |
1831 1832 1833 1834 1835 1836 1837 |
CONFIG_BOOTP_DNS2 - If a DHCP client requests the DNS serverip from a DHCP server, it is possible that more than one DNS serverip is offered to the client. If CONFIG_BOOTP_DNS2 is enabled, the secondary DNS serverip will be stored in the additional environment variable "dnsip2". The first DNS serverip is always stored in the variable "dnsip", when CONFIG_BOOTP_DNS |
1fe80d79c Finally retire cm... |
1838 |
is defined. |
fe389a82c - Added CONFIG_BO... |
1839 1840 1841 1842 |
CONFIG_BOOTP_SEND_HOSTNAME - Some DHCP servers are capable to do a dynamic update of a DNS server. To do this, they need the hostname of the DHCP requester. |
5d110f0aa New CONFIG_BOOTP_... |
1843 |
If CONFIG_BOOTP_SEND_HOSTNAME is defined, the content |
1fe80d79c Finally retire cm... |
1844 1845 |
of the "hostname" environment variable is passed as option 12 to the DHCP server. |
fe389a82c - Added CONFIG_BO... |
1846 |
|
d9a2f416d DHCP request fix ... |
1847 1848 1849 1850 1851 1852 1853 1854 1855 1856 1857 1858 1859 |
CONFIG_BOOTP_DHCP_REQUEST_DELAY A 32bit value in microseconds for a delay between receiving a "DHCP Offer" and sending the "DHCP Request". This fixes a problem with certain DHCP servers that don't respond 100% of the time to a "DHCP request". E.g. On an AT91RM9200 processor running at 180MHz, this delay needed to be *at least* 15,000 usec before a Windows Server 2003 DHCP server would reply 100% of the time. I recommend at least 50,000 usec to be safe. The alternative is to hope that one of the retries will be successful but note that the DHCP timeout and retry process takes a longer than this delay. |
d22c338e0 net: Add link-loc... |
1860 1861 1862 1863 1864 1865 1866 |
- Link-local IP address negotiation: Negotiate with other link-local clients on the local network for an address that doesn't require explicit configuration. This is especially useful if a DHCP server cannot be guaranteed to exist in all environments that the device must operate. See doc/README.link-local for more information. |
a3d991bd0 Patches by Pantel... |
1867 |
- CDP Options: |
6e5923851 * Cleanup, minor ... |
1868 |
CONFIG_CDP_DEVICE_ID |
a3d991bd0 Patches by Pantel... |
1869 1870 1871 1872 1873 1874 1875 1876 1877 1878 1879 1880 |
The device id used in CDP trigger frames. CONFIG_CDP_DEVICE_ID_PREFIX A two character string which is prefixed to the MAC address of the device. CONFIG_CDP_PORT_ID A printf format string which contains the ascii name of the port. Normally is set to "eth%d" which sets |
11ccc33fa Many spelling fix... |
1881 |
eth0 for the first Ethernet, eth1 for the second etc. |
a3d991bd0 Patches by Pantel... |
1882 1883 1884 1885 1886 1887 1888 1889 1890 1891 1892 1893 1894 1895 1896 1897 1898 1899 1900 1901 1902 1903 1904 1905 1906 1907 |
CONFIG_CDP_CAPABILITIES A 32bit integer which indicates the device capabilities; 0x00000010 for a normal host which does not forwards. CONFIG_CDP_VERSION An ascii string containing the version of the software. CONFIG_CDP_PLATFORM An ascii string containing the name of the platform. CONFIG_CDP_TRIGGER A 32bit integer sent on the trigger. CONFIG_CDP_POWER_CONSUMPTION A 16bit integer containing the power consumption of the device in .1 of milliwatts. CONFIG_CDP_APPLIANCE_VLAN_TYPE A byte containing the id of the VLAN. |
c609719b8 Initial revision |
1908 1909 1910 1911 1912 1913 1914 1915 1916 1917 |
- Status LED: CONFIG_STATUS_LED Several configurations allow to display the current status using a LED. For instance, the LED will blink fast while running U-Boot code, stop blinking as soon as a reply to a BOOTP request was received, and start blinking slow once the Linux kernel is running (supported by a status LED driver in the Linux kernel). Defining CONFIG_STATUS_LED enables this feature in U-Boot. |
1df7bbba2 README: document ... |
1918 1919 1920 1921 1922 1923 1924 |
Additional options: CONFIG_GPIO_LED The status LED can be connected to a GPIO pin. In such cases, the gpio_led driver can be used as a status LED backend implementation. Define CONFIG_GPIO_LED to include the gpio_led driver in the U-Boot binary. |
9dfdcdfed gpio_led: add sup... |
1925 1926 1927 1928 1929 1930 |
CONFIG_GPIO_LED_INVERTED_TABLE Some GPIO connected LEDs may have inverted polarity in which case the GPIO high value corresponds to LED off state and GPIO low value corresponds to LED on state. In such cases CONFIG_GPIO_LED_INVERTED_TABLE may be defined with a list of GPIO LEDs that have inverted polarity. |
c609719b8 Initial revision |
1931 1932 1933 1934 1935 |
- CAN Support: CONFIG_CAN_DRIVER Defining CONFIG_CAN_DRIVER enables CAN driver support on those systems that support this (optional) feature, like the TQM8xxL modules. |
3f4978c71 i2c: common chang... |
1936 1937 1938 1939 1940 1941 1942 1943 1944 1945 |
- I2C Support: CONFIG_SYS_I2C This enable the NEW i2c subsystem, and will allow you to use i2c commands at the u-boot command line (as long as you set CONFIG_CMD_I2C in CONFIG_COMMANDS) and communicate with i2c based realtime clock chips or other i2c devices. See common/cmd_i2c.c for a description of the command line interface. ported i2c driver to the new framework: |
ea818dbbc i2c, soft-i2c: sw... |
1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 |
- drivers/i2c/soft_i2c.c: - activate first bus with CONFIG_SYS_I2C_SOFT define CONFIG_SYS_I2C_SOFT_SPEED and CONFIG_SYS_I2C_SOFT_SLAVE for defining speed and slave address - activate second bus with I2C_SOFT_DECLARATIONS2 define CONFIG_SYS_I2C_SOFT_SPEED_2 and CONFIG_SYS_I2C_SOFT_SLAVE_2 for defining speed and slave address - activate third bus with I2C_SOFT_DECLARATIONS3 define CONFIG_SYS_I2C_SOFT_SPEED_3 and CONFIG_SYS_I2C_SOFT_SLAVE_3 for defining speed and slave address - activate fourth bus with I2C_SOFT_DECLARATIONS4 define CONFIG_SYS_I2C_SOFT_SPEED_4 and CONFIG_SYS_I2C_SOFT_SLAVE_4 for defining speed and slave address |
3f4978c71 i2c: common chang... |
1959 |
|
00f792e0d i2c, fsl_i2c: swi... |
1960 1961 1962 1963 1964 1965 |
- drivers/i2c/fsl_i2c.c: - activate i2c driver with CONFIG_SYS_I2C_FSL define CONFIG_SYS_FSL_I2C_OFFSET for setting the register offset CONFIG_SYS_FSL_I2C_SPEED for the i2c speed and CONFIG_SYS_FSL_I2C_SLAVE for the slave addr of the first bus. |
93e145964 Coding Style clea... |
1966 |
- If your board supports a second fsl i2c bus, define |
00f792e0d i2c, fsl_i2c: swi... |
1967 1968 1969 1970 |
CONFIG_SYS_FSL_I2C2_OFFSET for the register offset CONFIG_SYS_FSL_I2C2_SPEED for the speed and CONFIG_SYS_FSL_I2C2_SLAVE for the slave address of the second bus. |
1f2ba722a tegra: i2c: Enabl... |
1971 |
- drivers/i2c/tegra_i2c.c: |
10cee5166 README: I2C: Fix ... |
1972 1973 1974 |
- activate this driver with CONFIG_SYS_I2C_TEGRA - This driver adds 4 i2c buses with a fix speed from 100000 and the slave addr 0! |
1f2ba722a tegra: i2c: Enabl... |
1975 |
|
880540dec i2c, ppc4xx_i2c: ... |
1976 1977 1978 1979 |
- drivers/i2c/ppc4xx_i2c.c - activate this driver with CONFIG_SYS_I2C_PPC4XX - CONFIG_SYS_I2C_PPC4XX_CH0 activate hardware channel 0 - CONFIG_SYS_I2C_PPC4XX_CH1 activate hardware channel 1 |
fac964089 i2c: mxc: move to... |
1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 |
- drivers/i2c/i2c_mxc.c - activate this driver with CONFIG_SYS_I2C_MXC - define speed for bus 1 with CONFIG_SYS_MXC_I2C1_SPEED - define slave for bus 1 with CONFIG_SYS_MXC_I2C1_SLAVE - define speed for bus 2 with CONFIG_SYS_MXC_I2C2_SPEED - define slave for bus 2 with CONFIG_SYS_MXC_I2C2_SLAVE - define speed for bus 3 with CONFIG_SYS_MXC_I2C3_SPEED - define slave for bus 3 with CONFIG_SYS_MXC_I2C3_SLAVE If thoses defines are not set, default value is 100000 for speed, and 0 for slave. |
1086bfa9f i2c: Add support ... |
1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 |
- drivers/i2c/rcar_i2c.c: - activate this driver with CONFIG_SYS_I2C_RCAR - This driver adds 4 i2c buses - CONFIG_SYS_RCAR_I2C0_BASE for setting the register channel 0 - CONFIG_SYS_RCAR_I2C0_SPEED for for the speed channel 0 - CONFIG_SYS_RCAR_I2C1_BASE for setting the register channel 1 - CONFIG_SYS_RCAR_I2C1_SPEED for for the speed channel 1 - CONFIG_SYS_RCAR_I2C2_BASE for setting the register channel 2 - CONFIG_SYS_RCAR_I2C2_SPEED for for the speed channel 2 - CONFIG_SYS_RCAR_I2C3_BASE for setting the register channel 3 - CONFIG_SYS_RCAR_I2C3_SPEED for for the speed channel 3 - CONFIF_SYS_RCAR_I2C_NUM_CONTROLLERS for number of i2c buses |
2035d77d7 i2c: sh_i2c: Upda... |
2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 |
- drivers/i2c/sh_i2c.c: - activate this driver with CONFIG_SYS_I2C_SH - This driver adds from 2 to 5 i2c buses - CONFIG_SYS_I2C_SH_BASE0 for setting the register channel 0 - CONFIG_SYS_I2C_SH_SPEED0 for for the speed channel 0 - CONFIG_SYS_I2C_SH_BASE1 for setting the register channel 1 - CONFIG_SYS_I2C_SH_SPEED1 for for the speed channel 1 - CONFIG_SYS_I2C_SH_BASE2 for setting the register channel 2 - CONFIG_SYS_I2C_SH_SPEED2 for for the speed channel 2 - CONFIG_SYS_I2C_SH_BASE3 for setting the register channel 3 - CONFIG_SYS_I2C_SH_SPEED3 for for the speed channel 3 - CONFIG_SYS_I2C_SH_BASE4 for setting the register channel 4 - CONFIG_SYS_I2C_SH_SPEED4 for for the speed channel 4 - CONFIG_SYS_I2C_SH_BASE5 for setting the register channel 5 - CONFIG_SYS_I2C_SH_SPEED5 for for the speed channel 5 - CONFIF_SYS_I2C_SH_NUM_CONTROLLERS for nummber of i2c buses |
6789e84ec i2c, omap24xx: co... |
2020 2021 2022 2023 2024 2025 2026 2027 2028 2029 2030 2031 |
- drivers/i2c/omap24xx_i2c.c - activate this driver with CONFIG_SYS_I2C_OMAP24XX - CONFIG_SYS_OMAP24_I2C_SPEED speed channel 0 - CONFIG_SYS_OMAP24_I2C_SLAVE slave addr channel 0 - CONFIG_SYS_OMAP24_I2C_SPEED1 speed channel 1 - CONFIG_SYS_OMAP24_I2C_SLAVE1 slave addr channel 1 - CONFIG_SYS_OMAP24_I2C_SPEED2 speed channel 2 - CONFIG_SYS_OMAP24_I2C_SLAVE2 slave addr channel 2 - CONFIG_SYS_OMAP24_I2C_SPEED3 speed channel 3 - CONFIG_SYS_OMAP24_I2C_SLAVE3 slave addr channel 3 - CONFIG_SYS_OMAP24_I2C_SPEED4 speed channel 4 - CONFIG_SYS_OMAP24_I2C_SLAVE4 slave addr channel 4 |
0bdffe71f i2c, zynq: conver... |
2032 2033 2034 2035 |
- drivers/i2c/zynq_i2c.c - activate this driver with CONFIG_SYS_I2C_ZYNQ - set CONFIG_SYS_I2C_ZYNQ_SPEED for speed setting - set CONFIG_SYS_I2C_ZYNQ_SLAVE for slave addr |
e717fc6d1 i2c: samsung: reg... |
2036 2037 2038 2039 2040 |
- drivers/i2c/s3c24x0_i2c.c: - activate this driver with CONFIG_SYS_I2C_S3C24X0 - This driver adds i2c buses (11 for Exynos5250, Exynos5420 9 i2c buses for Exynos4 and 1 for S3C24X0 SoCs from Samsung) with a fix speed from 100000 and the slave addr 0! |
3f4978c71 i2c: common chang... |
2041 2042 2043 2044 2045 2046 2047 2048 2049 2050 2051 2052 2053 2054 2055 2056 2057 2058 2059 2060 2061 2062 2063 2064 2065 2066 2067 2068 2069 2070 2071 2072 2073 2074 2075 2076 2077 |
additional defines: CONFIG_SYS_NUM_I2C_BUSES Hold the number of i2c busses you want to use. If you don't use/have i2c muxes on your i2c bus, this is equal to CONFIG_SYS_NUM_I2C_ADAPTERS, and you can omit this define. CONFIG_SYS_I2C_DIRECT_BUS define this, if you don't use i2c muxes on your hardware. if CONFIG_SYS_I2C_MAX_HOPS is not defined or == 0 you can omit this define. CONFIG_SYS_I2C_MAX_HOPS define how many muxes are maximal consecutively connected on one i2c bus. If you not use i2c muxes, omit this define. CONFIG_SYS_I2C_BUSES hold a list of busses you want to use, only used if CONFIG_SYS_I2C_DIRECT_BUS is not defined, for example a board with CONFIG_SYS_I2C_MAX_HOPS = 1 and CONFIG_SYS_NUM_I2C_BUSES = 9: CONFIG_SYS_I2C_BUSES {{0, {I2C_NULL_HOP}}, \ {0, {{I2C_MUX_PCA9547, 0x70, 1}}}, \ {0, {{I2C_MUX_PCA9547, 0x70, 2}}}, \ {0, {{I2C_MUX_PCA9547, 0x70, 3}}}, \ {0, {{I2C_MUX_PCA9547, 0x70, 4}}}, \ {0, {{I2C_MUX_PCA9547, 0x70, 5}}}, \ {1, {I2C_NULL_HOP}}, \ {1, {{I2C_MUX_PCA9544, 0x72, 1}}}, \ {1, {{I2C_MUX_PCA9544, 0x72, 2}}}, \ } which defines bus 0 on adapter 0 without a mux |
ea818dbbc i2c, soft-i2c: sw... |
2078 2079 2080 2081 2082 |
bus 1 on adapter 0 with a PCA9547 on address 0x70 port 1 bus 2 on adapter 0 with a PCA9547 on address 0x70 port 2 bus 3 on adapter 0 with a PCA9547 on address 0x70 port 3 bus 4 on adapter 0 with a PCA9547 on address 0x70 port 4 bus 5 on adapter 0 with a PCA9547 on address 0x70 port 5 |
3f4978c71 i2c: common chang... |
2083 |
bus 6 on adapter 1 without a mux |
ea818dbbc i2c, soft-i2c: sw... |
2084 2085 |
bus 7 on adapter 1 with a PCA9544 on address 0x72 port 1 bus 8 on adapter 1 with a PCA9544 on address 0x72 port 2 |
3f4978c71 i2c: common chang... |
2086 2087 |
If you do not have i2c muxes on your board, omit this define. |
ea818dbbc i2c, soft-i2c: sw... |
2088 |
- Legacy I2C Support: CONFIG_HARD_I2C |
3f4978c71 i2c: common chang... |
2089 2090 2091 2092 2093 2094 2095 2096 2097 |
NOTE: It is intended to move drivers to CONFIG_SYS_I2C which provides the following compelling advantages: - more than one i2c adapter is usable - approved multibus support - better i2c mux support ** Please consider updating your I2C driver now. ** |
ea818dbbc i2c, soft-i2c: sw... |
2098 2099 2100 |
These enable legacy I2C serial bus commands. Defining CONFIG_HARD_I2C will include the appropriate I2C driver for the selected CPU. |
c609719b8 Initial revision |
2101 |
|
945af8d72 * Add support for... |
2102 |
This will allow you to use i2c commands at the u-boot |
602ad3b33 README: Rewrite c... |
2103 |
command line (as long as you set CONFIG_CMD_I2C in |
b37c7e5e5 * Patch by Seb Ja... |
2104 2105 |
CONFIG_COMMANDS) and communicate with i2c based realtime clock chips. See common/cmd_i2c.c for a description of the |
43d9616cf * Patch by Robert... |
2106 |
command line interface. |
c609719b8 Initial revision |
2107 |
|
bb99ad6d8 Add support for m... |
2108 |
CONFIG_HARD_I2C selects a hardware I2C controller. |
b37c7e5e5 * Patch by Seb Ja... |
2109 |
|
945af8d72 * Add support for... |
2110 |
There are several other quantities that must also be |
ea818dbbc i2c, soft-i2c: sw... |
2111 |
defined when you define CONFIG_HARD_I2C. |
c609719b8 Initial revision |
2112 |
|
6d0f6bcf3 rename CFG_ macro... |
2113 |
In both cases you will need to define CONFIG_SYS_I2C_SPEED |
945af8d72 * Add support for... |
2114 |
to be the frequency (in Hz) at which you wish your i2c bus |
6d0f6bcf3 rename CFG_ macro... |
2115 |
to run and CONFIG_SYS_I2C_SLAVE to be the address of this node (ie |
11ccc33fa Many spelling fix... |
2116 |
the CPU's i2c node address). |
945af8d72 * Add support for... |
2117 |
|
8d321b81c Update README to ... |
2118 |
Now, the u-boot i2c code for the mpc8xx |
a47a12bec Move arch/ppc to ... |
2119 |
(arch/powerpc/cpu/mpc8xx/i2c.c) sets the CPU up as a master node |
8d321b81c Update README to ... |
2120 2121 2122 |
and so its address should therefore be cleared to 0 (See, eg, MPC823e User's Manual p.16-473). So, set CONFIG_SYS_I2C_SLAVE to 0. |
c609719b8 Initial revision |
2123 |
|
5da71efa1 Reset i2c slave d... |
2124 2125 2126 2127 2128 2129 |
CONFIG_SYS_I2C_INIT_MPC5XXX When a board is reset during an i2c bus transfer chips might think that the current transfer is still in progress. Reset the slave devices by sending start commands until the slave device responds. |
945af8d72 * Add support for... |
2130 |
That's all that's required for CONFIG_HARD_I2C. |
c609719b8 Initial revision |
2131 |
|
ea818dbbc i2c, soft-i2c: sw... |
2132 |
If you use the software i2c interface (CONFIG_SYS_I2C_SOFT) |
b37c7e5e5 * Patch by Seb Ja... |
2133 2134 |
then the following macros need to be defined (examples are from include/configs/lwmon.h): |
c609719b8 Initial revision |
2135 2136 |
I2C_INIT |
b37c7e5e5 * Patch by Seb Ja... |
2137 |
(Optional). Any commands necessary to enable the I2C |
43d9616cf * Patch by Robert... |
2138 |
controller or configure ports. |
c609719b8 Initial revision |
2139 |
|
ba56f6257 Patch by Travis S... |
2140 |
eg: #define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL) |
b37c7e5e5 * Patch by Seb Ja... |
2141 |
|
c609719b8 Initial revision |
2142 |
I2C_PORT |
43d9616cf * Patch by Robert... |
2143 2144 2145 |
(Only for MPC8260 CPU). The I/O port to use (the code assumes both bits are on the same port). Valid values are 0..3 for ports A..D. |
c609719b8 Initial revision |
2146 2147 2148 2149 2150 2151 |
I2C_ACTIVE The code necessary to make the I2C data line active (driven). If the data line is open collector, this define can be null. |
b37c7e5e5 * Patch by Seb Ja... |
2152 |
eg: #define I2C_ACTIVE (immr->im_cpm.cp_pbdir |= PB_SDA) |
c609719b8 Initial revision |
2153 2154 2155 2156 2157 |
I2C_TRISTATE The code necessary to make the I2C data line tri-stated (inactive). If the data line is open collector, this define can be null. |
b37c7e5e5 * Patch by Seb Ja... |
2158 |
eg: #define I2C_TRISTATE (immr->im_cpm.cp_pbdir &= ~PB_SDA) |
c609719b8 Initial revision |
2159 |
I2C_READ |
472d54605 Consolidate bool ... |
2160 2161 |
Code that returns true if the I2C data line is high, false if it is low. |
c609719b8 Initial revision |
2162 |
|
b37c7e5e5 * Patch by Seb Ja... |
2163 |
eg: #define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0) |
c609719b8 Initial revision |
2164 |
I2C_SDA(bit) |
472d54605 Consolidate bool ... |
2165 2166 |
If <bit> is true, sets the I2C data line high. If it is false, it clears it (low). |
c609719b8 Initial revision |
2167 |
|
b37c7e5e5 * Patch by Seb Ja... |
2168 |
eg: #define I2C_SDA(bit) \ |
2535d6027 * Patch by Martin... |
2169 |
if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \ |
ba56f6257 Patch by Travis S... |
2170 |
else immr->im_cpm.cp_pbdat &= ~PB_SDA |
b37c7e5e5 * Patch by Seb Ja... |
2171 |
|
c609719b8 Initial revision |
2172 |
I2C_SCL(bit) |
472d54605 Consolidate bool ... |
2173 2174 |
If <bit> is true, sets the I2C clock line high. If it is false, it clears it (low). |
c609719b8 Initial revision |
2175 |
|
b37c7e5e5 * Patch by Seb Ja... |
2176 |
eg: #define I2C_SCL(bit) \ |
2535d6027 * Patch by Martin... |
2177 |
if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \ |
ba56f6257 Patch by Travis S... |
2178 |
else immr->im_cpm.cp_pbdat &= ~PB_SCL |
b37c7e5e5 * Patch by Seb Ja... |
2179 |
|
c609719b8 Initial revision |
2180 2181 2182 2183 |
I2C_DELAY This delay is invoked four times per clock cycle so this controls the rate of data transfer. The data rate thus |
b37c7e5e5 * Patch by Seb Ja... |
2184 |
is 1 / (I2C_DELAY * 4). Often defined to be something |
945af8d72 * Add support for... |
2185 |
like: |
b37c7e5e5 * Patch by Seb Ja... |
2186 |
#define I2C_DELAY udelay(2) |
c609719b8 Initial revision |
2187 |
|
793b5726f i2c: soft_i2c: ad... |
2188 2189 2190 2191 2192 2193 2194 2195 2196 |
CONFIG_SOFT_I2C_GPIO_SCL / CONFIG_SOFT_I2C_GPIO_SDA If your arch supports the generic GPIO framework (asm/gpio.h), then you may alternatively define the two GPIOs that are to be used as SCL / SDA. Any of the previous I2C_xxx macros will have GPIO-based defaults assigned to them as appropriate. You should define these to the GPIO value as given directly to the generic GPIO functions. |
6d0f6bcf3 rename CFG_ macro... |
2197 |
CONFIG_SYS_I2C_INIT_BOARD |
47cd00fa7 * Patches by Robe... |
2198 |
|
8bde7f776 * Code cleanup: |
2199 2200 2201 2202 2203 2204 2205 2206 |
When a board is reset during an i2c bus transfer chips might think that the current transfer is still in progress. On some boards it is possible to access the i2c SCLK line directly, either by using the processor pin as a GPIO or by having a second pin connected to the bus. If this option is defined a custom i2c_init_board() routine in boards/xxx/board.c is run early in the boot sequence. |
47cd00fa7 * Patches by Robe... |
2207 |
|
26a33504a fsl_i2c: Added a ... |
2208 2209 2210 2211 2212 2213 2214 2215 2216 2217 |
CONFIG_SYS_I2C_BOARD_LATE_INIT An alternative to CONFIG_SYS_I2C_INIT_BOARD. If this option is defined a custom i2c_board_late_init() routine in boards/xxx/board.c is run AFTER the operations in i2c_init() is completed. This callpoint can be used to unreset i2c bus using CPU i2c controller register accesses for CPUs whose i2c controller provide such a method. It is called at the end of i2c_init() to allow i2c_init operations to setup the i2c bus controller on the CPU (e.g. setting bus speed & slave address). |
17ea11774 Patch by Tolunay ... |
2218 2219 2220 2221 2222 |
CONFIG_I2CFAST (PPC405GP|PPC405EP only) This option enables configuration of bi_iic_fast[] flags in u-boot bd_info structure based on u-boot environment variable "i2cfast". (see also i2cfast) |
bb99ad6d8 Add support for m... |
2223 2224 2225 |
CONFIG_I2C_MULTI_BUS This option allows the use of multiple I2C buses, each of which |
c0f40859f README: white-spa... |
2226 2227 |
must have a controller. At any point in time, only one bus is active. To switch to a different bus, use the 'i2c dev' command. |
bb99ad6d8 Add support for m... |
2228 |
Note that bus numbering is zero-based. |
6d0f6bcf3 rename CFG_ macro... |
2229 |
CONFIG_SYS_I2C_NOPROBES |
bb99ad6d8 Add support for m... |
2230 2231 |
This option specifies a list of I2C devices that will be skipped |
c0f40859f README: white-spa... |
2232 |
when the 'i2c probe' command is issued. If CONFIG_I2C_MULTI_BUS |
0f89c54be i2c: Update refer... |
2233 2234 |
is set, specify a list of bus-device pairs. Otherwise, specify a 1D array of device addresses |
bb99ad6d8 Add support for m... |
2235 2236 2237 |
e.g. #undef CONFIG_I2C_MULTI_BUS |
c0f40859f README: white-spa... |
2238 |
#define CONFIG_SYS_I2C_NOPROBES {0x50,0x68} |
bb99ad6d8 Add support for m... |
2239 2240 |
will skip addresses 0x50 and 0x68 on a board with one I2C bus |
c0f40859f README: white-spa... |
2241 |
#define CONFIG_I2C_MULTI_BUS |
6d0f6bcf3 rename CFG_ macro... |
2242 |
#define CONFIG_SYS_I2C_MULTI_NOPROBES {{0,0x50},{0,0x68},{1,0x54}} |
bb99ad6d8 Add support for m... |
2243 2244 |
will skip addresses 0x50 and 0x68 on bus 0 and address 0x54 on bus 1 |
6d0f6bcf3 rename CFG_ macro... |
2245 |
CONFIG_SYS_SPD_BUS_NUM |
be5e61815 mpc83xx: Update 8... |
2246 2247 2248 |
If defined, then this indicates the I2C bus number for DDR SPD. If not defined, then U-Boot assumes that SPD is on I2C bus 0. |
6d0f6bcf3 rename CFG_ macro... |
2249 |
CONFIG_SYS_RTC_BUS_NUM |
0dc018ece [PATCH] I2C: Add ... |
2250 2251 2252 |
If defined, then this indicates the I2C bus number for the RTC. If not defined, then U-Boot assumes that RTC is on I2C bus 0. |
6d0f6bcf3 rename CFG_ macro... |
2253 |
CONFIG_SYS_DTT_BUS_NUM |
0dc018ece [PATCH] I2C: Add ... |
2254 2255 2256 |
If defined, then this indicates the I2C bus number for the DTT. If not defined, then U-Boot assumes that DTT is on I2C bus 0. |
6d0f6bcf3 rename CFG_ macro... |
2257 |
CONFIG_SYS_I2C_DTT_ADDR: |
9ebbb54f7 ppc4xx: Allow DTT... |
2258 2259 2260 2261 |
If defined, specifies the I2C address of the DTT device. If not defined, then U-Boot uses predefined value for specified DTT device. |
2ac6985a7 soft_i2c.c add op... |
2262 2263 2264 2265 2266 2267 2268 2269 2270 |
CONFIG_SOFT_I2C_READ_REPEATED_START defining this will force the i2c_read() function in the soft_i2c driver to perform an I2C repeated start between writing the address pointer and reading the data. If this define is omitted the default behaviour of doing a stop-start sequence will be used. Most I2C devices can use either method, but some require one or the other. |
be5e61815 mpc83xx: Update 8... |
2271 |
|
c609719b8 Initial revision |
2272 2273 2274 2275 2276 |
- SPI Support: CONFIG_SPI Enables SPI driver (so far only tested with SPI EEPROM, also an instance works with Crystal A/D and D/As on the SACSng board) |
6639562e6 spi: add support ... |
2277 2278 2279 2280 |
CONFIG_SH_SPI Enables the driver for SPI controller on SuperH. Currently only SH7757 is supported. |
c609719b8 Initial revision |
2281 2282 2283 2284 2285 2286 |
CONFIG_SPI_X Enables extended (16-bit) SPI EEPROM addressing. (symmetrical to CONFIG_I2C_X) CONFIG_SOFT_SPI |
43d9616cf * Patch by Robert... |
2287 2288 2289 2290 2291 2292 2293 |
Enables a software (bit-bang) SPI driver rather than using hardware support. This is a general purpose driver that only requires three general I/O port pins (two outputs, one input) to function. If this is defined, the board configuration must define several SPI configuration items (port pins to use, etc). For an example, see include/configs/sacsng.h. |
c609719b8 Initial revision |
2294 |
|
04a9e1180 Add support for a... |
2295 2296 2297 2298 2299 |
CONFIG_HARD_SPI Enables a hardware SPI driver for general-purpose reads and writes. As with CONFIG_SOFT_SPI, the board configuration must define a list of chip-select function pointers. |
c0f40859f README: white-spa... |
2300 |
Currently supported on some MPC8xxx processors. For an |
04a9e1180 Add support for a... |
2301 |
example, see include/configs/mpc8349emds.h. |
38254f45b New i.MX31 SPI dr... |
2302 2303 2304 |
CONFIG_MXC_SPI Enables the driver for the SPI controllers on i.MX and MXC |
2e3cd1cda README: Fix suppo... |
2305 |
SoCs. Currently i.MX31/35/51 are supported. |
38254f45b New i.MX31 SPI dr... |
2306 |
|
0133502e3 Improve configura... |
2307 |
- FPGA Support: CONFIG_FPGA |
c609719b8 Initial revision |
2308 |
|
0133502e3 Improve configura... |
2309 2310 2311 2312 2313 2314 |
Enables FPGA subsystem. CONFIG_FPGA_<vendor> Enables support for specific chip vendors. (ALTERA, XILINX) |
c609719b8 Initial revision |
2315 |
|
0133502e3 Improve configura... |
2316 |
CONFIG_FPGA_<family> |
c609719b8 Initial revision |
2317 |
|
0133502e3 Improve configura... |
2318 2319 2320 2321 2322 2323 |
Enables support for FPGA family. (SPARTAN2, SPARTAN3, VIRTEX2, CYCLONE2, ACEX1K, ACEX) CONFIG_FPGA_COUNT Specify the number of FPGA devices to support. |
c609719b8 Initial revision |
2324 |
|
6d0f6bcf3 rename CFG_ macro... |
2325 |
CONFIG_SYS_FPGA_PROG_FEEDBACK |
c609719b8 Initial revision |
2326 |
|
8bde7f776 * Code cleanup: |
2327 |
Enable printing of hash marks during FPGA configuration. |
c609719b8 Initial revision |
2328 |
|
6d0f6bcf3 rename CFG_ macro... |
2329 |
CONFIG_SYS_FPGA_CHECK_BUSY |
c609719b8 Initial revision |
2330 |
|
43d9616cf * Patch by Robert... |
2331 2332 2333 2334 |
Enable checks on FPGA configuration interface busy status by the configuration function. This option will require a board or device specific function to be written. |
c609719b8 Initial revision |
2335 2336 2337 2338 2339 |
CONFIG_FPGA_DELAY If defined, a function that provides delays in the FPGA configuration driver. |
6d0f6bcf3 rename CFG_ macro... |
2340 |
CONFIG_SYS_FPGA_CHECK_CTRLC |
c609719b8 Initial revision |
2341 |
Allow Control-C to interrupt FPGA configuration |
6d0f6bcf3 rename CFG_ macro... |
2342 |
CONFIG_SYS_FPGA_CHECK_ERROR |
c609719b8 Initial revision |
2343 |
|
43d9616cf * Patch by Robert... |
2344 2345 2346 2347 |
Check for configuration errors during FPGA bitfile loading. For example, abort during Virtex II configuration if the INIT_B line goes low (which indicated a CRC error). |
c609719b8 Initial revision |
2348 |
|
6d0f6bcf3 rename CFG_ macro... |
2349 |
CONFIG_SYS_FPGA_WAIT_INIT |
c609719b8 Initial revision |
2350 |
|
43d9616cf * Patch by Robert... |
2351 2352 2353 |
Maximum time to wait for the INIT_B line to deassert after PROB_B has been deasserted during a Virtex II FPGA configuration sequence. The default time is 500 |
11ccc33fa Many spelling fix... |
2354 |
ms. |
c609719b8 Initial revision |
2355 |
|
6d0f6bcf3 rename CFG_ macro... |
2356 |
CONFIG_SYS_FPGA_WAIT_BUSY |
c609719b8 Initial revision |
2357 |
|
43d9616cf * Patch by Robert... |
2358 |
Maximum time to wait for BUSY to deassert during |
11ccc33fa Many spelling fix... |
2359 |
Virtex II FPGA configuration. The default is 5 ms. |
c609719b8 Initial revision |
2360 |
|
6d0f6bcf3 rename CFG_ macro... |
2361 |
CONFIG_SYS_FPGA_WAIT_CONFIG |
c609719b8 Initial revision |
2362 |
|
43d9616cf * Patch by Robert... |
2363 |
Time to wait after FPGA configuration. The default is |
11ccc33fa Many spelling fix... |
2364 |
200 ms. |
c609719b8 Initial revision |
2365 2366 2367 |
- Configuration Management: CONFIG_IDENT_STRING |
43d9616cf * Patch by Robert... |
2368 2369 |
If defined, this string will be added to the U-Boot version information (U_BOOT_VERSION) |
c609719b8 Initial revision |
2370 2371 |
- Vendor Parameter Protection: |
43d9616cf * Patch by Robert... |
2372 2373 |
U-Boot considers the values of the environment variables "serial#" (Board Serial Number) and |
7152b1d0b * Add support for... |
2374 |
"ethaddr" (Ethernet Address) to be parameters that |
43d9616cf * Patch by Robert... |
2375 2376 2377 2378 |
are set once by the board vendor / manufacturer, and protects these variables from casual modification by the user. Once set, these variables are read-only, and write or delete attempts are rejected. You can |
11ccc33fa Many spelling fix... |
2379 |
change this behaviour: |
c609719b8 Initial revision |
2380 2381 2382 |
If CONFIG_ENV_OVERWRITE is #defined in your config file, the write protection for vendor parameters is |
47cd00fa7 * Patches by Robe... |
2383 |
completely disabled. Anybody can change or delete |
c609719b8 Initial revision |
2384 2385 2386 2387 |
these parameters. Alternatively, if you #define _both_ CONFIG_ETHADDR _and_ CONFIG_OVERWRITE_ETHADDR_ONCE, a default |
11ccc33fa Many spelling fix... |
2388 |
Ethernet address is installed in the environment, |
c609719b8 Initial revision |
2389 2390 2391 |
which can be changed exactly ONCE by the user. [The serial# is unaffected by this, i. e. it remains read-only.] |
2598090b7 env: Add environm... |
2392 2393 2394 2395 |
The same can be accomplished in a more flexible way for any variable by configuring the type of access to allow for those variables in the ".flags" variable or define CONFIG_ENV_FLAGS_LIST_STATIC. |
c609719b8 Initial revision |
2396 2397 2398 2399 2400 2401 2402 2403 2404 2405 2406 2407 2408 2409 2410 |
- Protected RAM: CONFIG_PRAM Define this variable to enable the reservation of "protected RAM", i. e. RAM which is not overwritten by U-Boot. Define CONFIG_PRAM to hold the number of kB you want to reserve for pRAM. You can overwrite this default value by defining an environment variable "pram" to the number of kB you want to reserve. Note that the board info structure will still show the full amount of RAM. If pRAM is reserved, a new environment variable "mem" will automatically be defined to hold the amount of remaining RAM in a form that can be passed as boot argument to Linux, for instance like that: |
fe126d8b3 Change all '$(...... |
2411 |
setenv bootargs ... mem=\${mem} |
c609719b8 Initial revision |
2412 2413 2414 2415 2416 2417 2418 2419 2420 2421 2422 |
saveenv This way you can tell Linux not to use this memory, either, which results in a memory region that will not be affected by reboots. *WARNING* If your board configuration uses automatic detection of the RAM size, you must make sure that this memory test is non-destructive. So far, the following board configurations are known to be "pRAM-clean": |
1b0757ece PPC: remove dead ... |
2423 2424 |
IVMS8, IVML24, SPD8xx, TQM8xxL, HERMES, IP860, RPXlite, LWMON, |
544d97e9a PCU_E: remove cod... |
2425 |
FLAGADM, TQM8260 |
c609719b8 Initial revision |
2426 |
|
40fef0490 Introduce arch_ph... |
2427 2428 2429 2430 2431 2432 2433 |
- Access to physical memory region (> 4GB) Some basic support is provided for operations on memory not normally accessible to U-Boot - e.g. some architectures support access to more than 4GB of memory on 32-bit machines using physical address extension or similar. Define CONFIG_PHYSMEM to access this basic support, which currently only supports clearing the memory. |
c609719b8 Initial revision |
2434 2435 2436 2437 2438 2439 |
- Error Recovery: CONFIG_PANIC_HANG Define this variable to stop the system in case of a fatal error, so that you have to reset it manually. This is probably NOT a good idea for an embedded |
11ccc33fa Many spelling fix... |
2440 |
system where you want the system to reboot |
c609719b8 Initial revision |
2441 2442 2443 2444 2445 |
automatically as fast as possible, but it may be useful during development since you can try to debug the conditions that lead to the situation. CONFIG_NET_RETRY_COUNT |
43d9616cf * Patch by Robert... |
2446 2447 2448 2449 |
This variable defines the number of retries for network operations like ARP, RARP, TFTP, or BOOTP before giving up the operation. If not defined, a default value of 5 is used. |
c609719b8 Initial revision |
2450 |
|
40cb90ee2 net: make ARP tim... |
2451 2452 2453 |
CONFIG_ARP_TIMEOUT Timeout waiting for an ARP reply in milliseconds. |
48a3e999c net: nfs: make NF... |
2454 2455 2456 2457 2458 2459 |
CONFIG_NFS_TIMEOUT Timeout in milliseconds used in NFS protocol. If you encounter "ERROR: Cannot umount" in nfs command, try longer timeout such as #define CONFIG_NFS_TIMEOUT 10000UL |
c609719b8 Initial revision |
2460 |
- Command Interpreter: |
8078f1a5f README says CFG_A... |
2461 |
CONFIG_AUTO_COMPLETE |
04a85b3b3 * Patches by Pant... |
2462 2463 |
Enable auto completion of commands using TAB. |
a9398e018 Minor code cleanu... |
2464 2465 |
Note that this feature has NOT been implemented yet for the "hush" shell. |
8078f1a5f README says CFG_A... |
2466 |
|
6d0f6bcf3 rename CFG_ macro... |
2467 |
CONFIG_SYS_HUSH_PARSER |
c609719b8 Initial revision |
2468 2469 2470 2471 2472 2473 2474 2475 2476 |
Define this variable to enable the "hush" shell (from Busybox) as command line interpreter, thus enabling powerful command line syntax like if...then...else...fi conditionals or `&&' and '||' constructs ("shell scripts"). If undefined, you get the old, much simpler behaviour with a somewhat smaller memory footprint. |
6d0f6bcf3 rename CFG_ macro... |
2477 |
CONFIG_SYS_PROMPT_HUSH_PS2 |
c609719b8 Initial revision |
2478 2479 2480 2481 2482 2483 |
This defines the secondary prompt string, which is printed when the command interpreter needs more input to complete a command. Usually "> ". Note: |
8bde7f776 * Code cleanup: |
2484 2485 2486 2487 2488 2489 2490 |
In the current implementation, the local variables space and global environment variables space are separated. Local variables are those you define by simply typing `name=value'. To access a local variable later on, you have write `$name' or `${name}'; to execute the contents of a variable directly type `$name' at the command prompt. |
c609719b8 Initial revision |
2491 |
|
43d9616cf * Patch by Robert... |
2492 2493 2494 2495 |
Global environment variables are those you use setenv/printenv to work with. To run a command stored in such a variable, you need to use the run command, and you must not use the '$' sign to access them. |
c609719b8 Initial revision |
2496 2497 2498 2499 2500 2501 |
To store commands and special characters in a variable, please use double quotation marks surrounding the whole text of the variable, instead of the backslashes before semicolons and special symbols. |
aa0c71aca Document CONFIG_C... |
2502 2503 |
- Commandline Editing and History: CONFIG_CMDLINE_EDITING |
11ccc33fa Many spelling fix... |
2504 |
Enable editing and History functions for interactive |
b9365a26a Code cleanup |
2505 |
commandline input operations |
aa0c71aca Document CONFIG_C... |
2506 |
|
a8c7c708a * Patch by Gleb N... |
2507 |
- Default Environment: |
c609719b8 Initial revision |
2508 |
CONFIG_EXTRA_ENV_SETTINGS |
43d9616cf * Patch by Robert... |
2509 2510 |
Define this to contain any number of null terminated strings (variable = value pairs) that will be part of |
7152b1d0b * Add support for... |
2511 |
the default environment compiled into the boot image. |
2262cfeef * Patch by Daniel... |
2512 |
|
43d9616cf * Patch by Robert... |
2513 2514 |
For example, place something like this in your board's config file: |
c609719b8 Initial revision |
2515 2516 2517 2518 |
#define CONFIG_EXTRA_ENV_SETTINGS \ "myvar1=value1\0" \ "myvar2=value2\0" |
43d9616cf * Patch by Robert... |
2519 2520 2521 2522 |
Warning: This method is based on knowledge about the internal format how the environment is stored by the U-Boot code. This is NOT an official, exported interface! Although it is unlikely that this format |
7152b1d0b * Add support for... |
2523 |
will change soon, there is no guarantee either. |
c609719b8 Initial revision |
2524 |
You better know what you are doing here. |
43d9616cf * Patch by Robert... |
2525 2526 |
Note: overly (ab)use of the default environment is discouraged. Make sure to check other ways to preset |
74de7aefd Add "source" comm... |
2527 |
the environment like the "source" command or the |
43d9616cf * Patch by Robert... |
2528 |
boot command first. |
c609719b8 Initial revision |
2529 |
|
5e724ca2b Add env vars desc... |
2530 2531 2532 2533 2534 2535 2536 2537 2538 2539 2540 2541 2542 |
CONFIG_ENV_VARS_UBOOT_CONFIG Define this in order to add variables describing the U-Boot build configuration to the default environment. These will be named arch, cpu, board, vendor, and soc. Enabling this option will cause the following to be defined: - CONFIG_SYS_ARCH - CONFIG_SYS_CPU - CONFIG_SYS_BOARD - CONFIG_SYS_VENDOR - CONFIG_SYS_SOC |
7e27f89fd README: Document ... |
2543 2544 2545 2546 2547 |
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG Define this in order to add variables describing certain run-time determined information about the hardware to the environment. These will be named board_name, board_rev. |
06fd85389 arm: Add CONFIG_D... |
2548 2549 2550 2551 2552 2553 2554 2555 |
CONFIG_DELAY_ENVIRONMENT Normally the environment is loaded when the board is intialised so that it is available to U-Boot. This inhibits that so that the environment is not available until explicitly loaded later by U-Boot code. With CONFIG_OF_CONTROL this is instead controlled by the value of /config/load-environment. |
a8c7c708a * Patch by Gleb N... |
2556 |
- DataFlash Support: |
2abbe0754 * Patch by Nicola... |
2557 |
CONFIG_HAS_DATAFLASH |
8bde7f776 * Code cleanup: |
2558 2559 2560 |
Defining this option enables DataFlash features and allows to read/write in Dataflash via the standard commands cp, md... |
2abbe0754 * Patch by Nicola... |
2561 |
|
f61ec45eb README: Add descr... |
2562 2563 2564 2565 2566 2567 2568 2569 2570 2571 2572 2573 2574 2575 2576 2577 2578 2579 |
- Serial Flash support CONFIG_CMD_SF Defining this option enables SPI flash commands 'sf probe/read/write/erase/update'. Usage requires an initial 'probe' to define the serial flash parameters, followed by read/write/erase/update commands. The following defaults may be provided by the platform to handle the common case when only a single serial flash is present on the system. CONFIG_SF_DEFAULT_BUS Bus identifier CONFIG_SF_DEFAULT_CS Chip-select CONFIG_SF_DEFAULT_MODE (see include/spi.h) CONFIG_SF_DEFAULT_SPEED in Hz |
240072731 spi: Add SPI flas... |
2580 2581 2582 2583 |
CONFIG_CMD_SF_TEST Define this option to include a destructive SPI flash test ('sf test'). |
1dcd6d038 sf: Add bank addr... |
2584 2585 2586 2587 |
CONFIG_SPI_FLASH_BAR Ban/Extended Addr Reg Define this option to use the Bank addr/Extended addr support on SPI flashes which has size > 16Mbytes. |
b902e07ce sf: Add CONFIG_SF... |
2588 2589 2590 2591 2592 |
CONFIG_SF_DUAL_FLASH Dual flash memories Define this option to use dual flash support where two flash memories can be connected with a given cs line. currently Xilinx Zynq qspi support these type of connections. |
3f85ce278 * CVS add missing... |
2593 2594 2595 2596 2597 |
- SystemACE Support: CONFIG_SYSTEMACE Adding this option adds support for Xilinx SystemACE chips attached via some sort of local bus. The address |
11ccc33fa Many spelling fix... |
2598 |
of the chip must also be defined in the |
6d0f6bcf3 rename CFG_ macro... |
2599 |
CONFIG_SYS_SYSTEMACE_BASE macro. For example: |
3f85ce278 * CVS add missing... |
2600 2601 |
#define CONFIG_SYSTEMACE |
6d0f6bcf3 rename CFG_ macro... |
2602 |
#define CONFIG_SYS_SYSTEMACE_BASE 0xf0000000 |
3f85ce278 * CVS add missing... |
2603 2604 2605 |
When SystemACE support is added, the "ace" device type becomes available to the fat commands, i.e. fatls. |
ecb0ccd9c Allow to force TF... |
2606 2607 |
- TFTP Fixed UDP Port: CONFIG_TFTP_PORT |
28cb93758 Update for TFTP u... |
2608 |
If this is defined, the environment variable tftpsrcp |
ecb0ccd9c Allow to force TF... |
2609 |
is used to supply the TFTP UDP source port value. |
28cb93758 Update for TFTP u... |
2610 |
If tftpsrcp isn't defined, the normal pseudo-random port |
ecb0ccd9c Allow to force TF... |
2611 |
number generator is used. |
28cb93758 Update for TFTP u... |
2612 2613 2614 2615 2616 |
Also, the environment variable tftpdstp is used to supply the TFTP UDP destination port value. If tftpdstp isn't defined, the normal port 69 is used. The purpose for tftpsrcp is to allow a TFTP server to |
ecb0ccd9c Allow to force TF... |
2617 2618 2619 2620 2621 2622 |
blindly start the TFTP transfer using the pre-configured target IP address and UDP port. This has the effect of "punching through" the (Windows XP) firewall, allowing the remainder of the TFTP transfer to proceed normally. A better solution is to properly configure the firewall, but sometimes that is not allowed. |
bf36c5d52 Add hash command ... |
2623 2624 2625 2626 2627 2628 2629 2630 2631 2632 2633 2634 2635 2636 2637 2638 |
- Hashing support: CONFIG_CMD_HASH This enables a generic 'hash' command which can produce hashes / digests from a few algorithms (e.g. SHA1, SHA256). CONFIG_HASH_VERIFY Enable the hash verify command (hash -v). This adds to code size a little. CONFIG_SHA1 - support SHA1 hashing CONFIG_SHA256 - support SHA256 hashing Note: There is also a sha1sum command, which should perhaps be deprecated in favour of 'hash sha1'. |
a11f18737 imx: Add document... |
2639 2640 2641 2642 2643 2644 2645 2646 2647 2648 2649 2650 2651 2652 |
- Freescale i.MX specific commands: CONFIG_CMD_HDMIDETECT This enables 'hdmidet' command which returns true if an HDMI monitor is detected. This command is i.MX 6 specific. CONFIG_CMD_BMODE This enables the 'bmode' (bootmode) command for forcing a boot from specific media. This is useful for forcing the ROM's usb downloader to activate upon a watchdog reset which is nice when iterating on U-Boot. Using the reset button or running bmode normal will set it back to normal. This command currently supports i.MX53 and i.MX6. |
19c402afa image: Add RSA su... |
2653 2654 2655 2656 |
- Signing support: CONFIG_RSA This enables the RSA algorithm used for FIT image verification |
8bf2aad7e doc: README: Corr... |
2657 |
in U-Boot. See doc/uImage.FIT/signature.txt for more information. |
19c402afa image: Add RSA su... |
2658 2659 2660 |
The signing part is build into mkimage regardless of this option. |
9e50c406c i2c, bootcount: a... |
2661 2662 2663 2664 2665 2666 2667 2668 2669 2670 2671 2672 2673 2674 2675 2676 2677 2678 2679 2680 |
- bootcount support: CONFIG_BOOTCOUNT_LIMIT This enables the bootcounter support, see: http://www.denx.de/wiki/DULG/UBootBootCountLimit CONFIG_AT91SAM9XE enable special bootcounter support on at91sam9xe based boards. CONFIG_BLACKFIN enable special bootcounter support on blackfin based boards. CONFIG_SOC_DA8XX enable special bootcounter support on da850 based boards. CONFIG_BOOTCOUNT_RAM enable support for the bootcounter in RAM CONFIG_BOOTCOUNT_I2C enable support for the bootcounter on an i2c (like RTC) device. CONFIG_SYS_I2C_RTC_ADDR = i2c chip address CONFIG_SYS_BOOTCOUNT_ADDR = i2c addr which is used for the bootcounter. CONFIG_BOOTCOUNT_ALEN = address len |
19c402afa image: Add RSA su... |
2681 |
|
a8c7c708a * Patch by Gleb N... |
2682 |
- Show boot progress: |
c609719b8 Initial revision |
2683 |
CONFIG_SHOW_BOOT_PROGRESS |
43d9616cf * Patch by Robert... |
2684 2685 2686 2687 2688 2689 |
Defining this option allows to add some board- specific code (calling a user-provided function "show_boot_progress(int)") that enables you to show the system's boot progress on some display (for example, some LED's) on your board. At the moment, the following checkpoints are implemented: |
c609719b8 Initial revision |
2690 |
|
3a608ca01 bootstage: Implem... |
2691 2692 2693 2694 2695 2696 2697 2698 2699 2700 2701 2702 2703 2704 2705 2706 2707 2708 2709 2710 2711 2712 2713 2714 |
- Detailed boot stage timing CONFIG_BOOTSTAGE Define this option to get detailed timing of each stage of the boot process. CONFIG_BOOTSTAGE_USER_COUNT This is the number of available user bootstage records. Each time you call bootstage_mark(BOOTSTAGE_ID_ALLOC, ...) a new ID will be allocated from this stash. If you exceed the limit, recording will stop. CONFIG_BOOTSTAGE_REPORT Define this to print a report before boot, similar to this: Timer summary in microseconds: Mark Elapsed Stage 0 0 reset 3,575,678 3,575,678 board_init_f start 3,575,695 17 arch_cpu_init A9 3,575,777 82 arch_cpu_init done 3,659,598 83,821 board_init_r start 3,910,375 250,777 main_loop 29,916,167 26,005,792 bootm_start 30,361,327 445,160 start_kernel |
2eba38cf8 bootstage: Add bo... |
2715 2716 2717 |
CONFIG_CMD_BOOTSTAGE Add a 'bootstage' command which supports printing a report and un/stashing of bootstage data. |
94fd1316b bootstage: Store ... |
2718 2719 2720 2721 2722 2723 2724 2725 2726 2727 2728 2729 2730 2731 2732 2733 2734 2735 2736 2737 |
CONFIG_BOOTSTAGE_FDT Stash the bootstage information in the FDT. A root 'bootstage' node is created with each bootstage id as a child. Each child has a 'name' property and either 'mark' containing the mark time in microsecond, or 'accum' containing the accumulated time for that bootstage id in microseconds. For example: bootstage { 154 { name = "board_init_f"; mark = <3575678>; }; 170 { name = "lcd"; accum = <33482>; }; }; Code in the Linux kernel can find this in /proc/devicetree. |
1372cce2b [new uImage] Use ... |
2738 |
Legacy uImage format: |
c609719b8 Initial revision |
2739 2740 |
Arg Where When 1 common/cmd_bootm.c before attempting to boot an image |
ba56f6257 Patch by Travis S... |
2741 |
-1 common/cmd_bootm.c Image header has bad magic number |
c609719b8 Initial revision |
2742 |
2 common/cmd_bootm.c Image header has correct magic number |
ba56f6257 Patch by Travis S... |
2743 |
-2 common/cmd_bootm.c Image header has bad checksum |
c609719b8 Initial revision |
2744 |
3 common/cmd_bootm.c Image header has correct checksum |
ba56f6257 Patch by Travis S... |
2745 |
-3 common/cmd_bootm.c Image data has bad checksum |
c609719b8 Initial revision |
2746 2747 2748 |
4 common/cmd_bootm.c Image data has correct checksum -4 common/cmd_bootm.c Image is for unsupported architecture 5 common/cmd_bootm.c Architecture check OK |
1372cce2b [new uImage] Use ... |
2749 |
-5 common/cmd_bootm.c Wrong Image Type (not kernel, multi) |
c609719b8 Initial revision |
2750 2751 2752 2753 |
6 common/cmd_bootm.c Image Type check OK -6 common/cmd_bootm.c gunzip uncompression error -7 common/cmd_bootm.c Unimplemented compression type 7 common/cmd_bootm.c Uncompression OK |
1372cce2b [new uImage] Use ... |
2754 |
8 common/cmd_bootm.c No uncompress/copy overwrite error |
c609719b8 Initial revision |
2755 |
-9 common/cmd_bootm.c Unsupported OS (not Linux, BSD, VxWorks, QNX) |
1372cce2b [new uImage] Use ... |
2756 2757 2758 2759 2760 2761 2762 2763 |
9 common/image.c Start initial ramdisk verification -10 common/image.c Ramdisk header has bad magic number -11 common/image.c Ramdisk header has bad checksum 10 common/image.c Ramdisk header is OK -12 common/image.c Ramdisk data has bad checksum 11 common/image.c Ramdisk data has correct checksum 12 common/image.c Ramdisk verification complete, start loading |
11ccc33fa Many spelling fix... |
2764 |
-13 common/image.c Wrong Image Type (not PPC Linux ramdisk) |
1372cce2b [new uImage] Use ... |
2765 2766 |
13 common/image.c Start multifile image verification 14 common/image.c No initial ramdisk, no multifile, continue. |
c0f40859f README: white-spa... |
2767 |
15 arch/<arch>/lib/bootm.c All preparation done, transferring control to OS |
c609719b8 Initial revision |
2768 |
|
a47a12bec Move arch/ppc to ... |
2769 |
-30 arch/powerpc/lib/board.c Fatal error, hang the system |
11dadd547 * Patch by Steven... |
2770 2771 |
-31 post/post.c POST test failed, detected by post_output_backlog() -32 post/post.c POST test failed, detected by post_run_single() |
63e73c9a8 * Patches by Rein... |
2772 |
|
566a494f5 [PCS440EP] u... |
2773 2774 2775 2776 2777 2778 2779 2780 2781 2782 2783 2784 2785 2786 2787 2788 2789 2790 2791 2792 2793 2794 2795 2796 2797 2798 2799 2800 2801 2802 2803 2804 2805 2806 2807 2808 2809 2810 2811 2812 2813 2814 2815 2816 2817 2818 2819 2820 2821 |
34 common/cmd_doc.c before loading a Image from a DOC device -35 common/cmd_doc.c Bad usage of "doc" command 35 common/cmd_doc.c correct usage of "doc" command -36 common/cmd_doc.c No boot device 36 common/cmd_doc.c correct boot device -37 common/cmd_doc.c Unknown Chip ID on boot device 37 common/cmd_doc.c correct chip ID found, device available -38 common/cmd_doc.c Read Error on boot device 38 common/cmd_doc.c reading Image header from DOC device OK -39 common/cmd_doc.c Image header has bad magic number 39 common/cmd_doc.c Image header has correct magic number -40 common/cmd_doc.c Error reading Image from DOC device 40 common/cmd_doc.c Image header has correct magic number 41 common/cmd_ide.c before loading a Image from a IDE device -42 common/cmd_ide.c Bad usage of "ide" command 42 common/cmd_ide.c correct usage of "ide" command -43 common/cmd_ide.c No boot device 43 common/cmd_ide.c boot device found -44 common/cmd_ide.c Device not available 44 common/cmd_ide.c Device available -45 common/cmd_ide.c wrong partition selected 45 common/cmd_ide.c partition selected -46 common/cmd_ide.c Unknown partition table 46 common/cmd_ide.c valid partition table found -47 common/cmd_ide.c Invalid partition type 47 common/cmd_ide.c correct partition type -48 common/cmd_ide.c Error reading Image Header on boot device 48 common/cmd_ide.c reading Image Header from IDE device OK -49 common/cmd_ide.c Image header has bad magic number 49 common/cmd_ide.c Image header has correct magic number -50 common/cmd_ide.c Image header has bad checksum 50 common/cmd_ide.c Image header has correct checksum -51 common/cmd_ide.c Error reading Image from IDE device 51 common/cmd_ide.c reading Image from IDE device OK 52 common/cmd_nand.c before loading a Image from a NAND device -53 common/cmd_nand.c Bad usage of "nand" command 53 common/cmd_nand.c correct usage of "nand" command -54 common/cmd_nand.c No boot device 54 common/cmd_nand.c boot device found -55 common/cmd_nand.c Unknown Chip ID on boot device 55 common/cmd_nand.c correct chip ID found, device available -56 common/cmd_nand.c Error reading Image Header on boot device 56 common/cmd_nand.c reading Image Header from NAND device OK -57 common/cmd_nand.c Image header has bad magic number 57 common/cmd_nand.c Image header has correct magic number -58 common/cmd_nand.c Error reading Image from NAND device 58 common/cmd_nand.c reading Image from NAND device OK -60 common/env_common.c Environment has a bad CRC, using default |
11ccc33fa Many spelling fix... |
2822 |
64 net/eth.c starting with Ethernet configuration. |
566a494f5 [PCS440EP] u... |
2823 2824 2825 2826 2827 |
-64 net/eth.c no Ethernet found. 65 net/eth.c Ethernet found. -80 common/cmd_net.c usage wrong 80 common/cmd_net.c before calling NetLoop() |
11ccc33fa Many spelling fix... |
2828 |
-81 common/cmd_net.c some error in NetLoop() occurred |
566a494f5 [PCS440EP] u... |
2829 2830 2831 |
81 common/cmd_net.c NetLoop() back without error -82 common/cmd_net.c size == 0 (File with size 0 loaded) 82 common/cmd_net.c trying automatic boot |
74de7aefd Add "source" comm... |
2832 2833 |
83 common/cmd_net.c running "source" command -83 common/cmd_net.c some error in automatic boot or "source" command |
566a494f5 [PCS440EP] u... |
2834 |
84 common/cmd_net.c end without errors |
c609719b8 Initial revision |
2835 |
|
1372cce2b [new uImage] Use ... |
2836 2837 2838 2839 2840 2841 2842 2843 2844 |
FIT uImage format: Arg Where When 100 common/cmd_bootm.c Kernel FIT Image has correct format -100 common/cmd_bootm.c Kernel FIT Image has incorrect format 101 common/cmd_bootm.c No Kernel subimage unit name, using configuration -101 common/cmd_bootm.c Can't get configuration for kernel subimage 102 common/cmd_bootm.c Kernel unit name specified -103 common/cmd_bootm.c Can't get kernel subimage node offset |
f773bea8e [new uImage] Add ... |
2845 |
103 common/cmd_bootm.c Found configuration node |
1372cce2b [new uImage] Use ... |
2846 2847 2848 2849 2850 |
104 common/cmd_bootm.c Got kernel subimage node offset -104 common/cmd_bootm.c Kernel subimage hash verification failed 105 common/cmd_bootm.c Kernel subimage hash verification OK -105 common/cmd_bootm.c Kernel subimage is for unsupported architecture 106 common/cmd_bootm.c Architecture check OK |
11ccc33fa Many spelling fix... |
2851 2852 |
-106 common/cmd_bootm.c Kernel subimage has wrong type 107 common/cmd_bootm.c Kernel subimage type OK |
1372cce2b [new uImage] Use ... |
2853 2854 2855 2856 2857 2858 2859 2860 2861 2862 2863 2864 |
-107 common/cmd_bootm.c Can't get kernel subimage data/size 108 common/cmd_bootm.c Got kernel subimage data/size -108 common/cmd_bootm.c Wrong image type (not legacy, FIT) -109 common/cmd_bootm.c Can't get kernel subimage type -110 common/cmd_bootm.c Can't get kernel subimage comp -111 common/cmd_bootm.c Can't get kernel subimage os -112 common/cmd_bootm.c Can't get kernel subimage load address -113 common/cmd_bootm.c Image uncompress/copy overwrite error 120 common/image.c Start initial ramdisk verification -120 common/image.c Ramdisk FIT image has incorrect format 121 common/image.c Ramdisk FIT image has correct format |
11ccc33fa Many spelling fix... |
2865 |
122 common/image.c No ramdisk subimage unit name, using configuration |
1372cce2b [new uImage] Use ... |
2866 2867 2868 2869 2870 2871 2872 2873 2874 2875 2876 2877 |
-122 common/image.c Can't get configuration for ramdisk subimage 123 common/image.c Ramdisk unit name specified -124 common/image.c Can't get ramdisk subimage node offset 125 common/image.c Got ramdisk subimage node offset -125 common/image.c Ramdisk subimage hash verification failed 126 common/image.c Ramdisk subimage hash verification OK -126 common/image.c Ramdisk subimage for unsupported architecture 127 common/image.c Architecture check OK -127 common/image.c Can't get ramdisk subimage data/size 128 common/image.c Got ramdisk subimage data/size 129 common/image.c Can't get ramdisk load address -129 common/image.c Got ramdisk load address |
11ccc33fa Many spelling fix... |
2878 |
-130 common/cmd_doc.c Incorrect FIT image format |
1372cce2b [new uImage] Use ... |
2879 |
131 common/cmd_doc.c FIT image format OK |
11ccc33fa Many spelling fix... |
2880 |
-140 common/cmd_ide.c Incorrect FIT image format |
1372cce2b [new uImage] Use ... |
2881 |
141 common/cmd_ide.c FIT image format OK |
11ccc33fa Many spelling fix... |
2882 |
-150 common/cmd_nand.c Incorrect FIT image format |
1372cce2b [new uImage] Use ... |
2883 |
151 common/cmd_nand.c FIT image format OK |
d95f6ec73 fdt: Add option t... |
2884 2885 2886 2887 2888 2889 2890 2891 2892 2893 |
- FIT image support: CONFIG_FIT Enable support for the FIT uImage format. CONFIG_FIT_BEST_MATCH When no configuration is explicitly selected, default to the one whose fdt's compatibility field best matches that of U-Boot itself. A match is considered "best" if it matches the most specific compatibility entry of U-Boot's fdt's root node. The order of entries in the configuration's fdt is ignored. |
3e569a6b1 image: Add signin... |
2894 2895 2896 2897 |
CONFIG_FIT_SIGNATURE This option enables signature verification of FIT uImages, using a hash signed and verified using RSA. See doc/uImage.FIT/signature.txt for more details. |
4cf2609b0 README: fix docum... |
2898 2899 |
- Standalone program support: CONFIG_STANDALONE_LOAD_ADDR |
6feff899e README: fix typos... |
2900 2901 2902 |
This option defines a board specific value for the address where standalone program gets loaded, thus overwriting the architecture dependent default |
4cf2609b0 README: fix docum... |
2903 2904 2905 2906 2907 2908 |
settings. - Frame Buffer Address: CONFIG_FB_ADDR Define CONFIG_FB_ADDR if you want to use specific |
44a53b574 VIDEO: better doc... |
2909 2910 2911 2912 2913 2914 2915 |
address for frame buffer. This is typically the case when using a graphics controller has separate video memory. U-Boot will then place the frame buffer at the given address instead of dynamically reserving it in system RAM by calling lcd_setmem(), which grabs the memory for the frame buffer depending on the configured panel size. |
4cf2609b0 README: fix docum... |
2916 2917 |
Please see board_init_f function. |
cccfc2ab7 README: Rearrange... |
2918 2919 2920 2921 2922 2923 2924 2925 2926 2927 2928 2929 2930 2931 2932 2933 2934 2935 |
- Automatic software updates via TFTP server CONFIG_UPDATE_TFTP CONFIG_UPDATE_TFTP_CNT_MAX CONFIG_UPDATE_TFTP_MSEC_MAX These options enable and control the auto-update feature; for a more detailed description refer to doc/README.update. - MTD Support (mtdparts command, UBI support) CONFIG_MTD_DEVICE Adds the MTD device infrastructure from the Linux kernel. Needed for mtdparts command support. CONFIG_MTD_PARTITIONS Adds the MTD partitioning infrastructure from the Linux kernel. Needed for UBI support. |
70c219cd7 ubi: ubifs: Add d... |
2936 2937 2938 2939 2940 2941 2942 |
- UBI support CONFIG_CMD_UBI Adds commands for interacting with MTD partitions formatted with the UBI flash translation layer Requires also defining CONFIG_RBTREE |
147162dac ubi: ubifs: Turn ... |
2943 2944 2945 2946 |
CONFIG_UBI_SILENCE_MSG Make the verbose messages from UBI stop printing. This leaves warnings and errors enabled. |
70c219cd7 ubi: ubifs: Add d... |
2947 2948 2949 2950 2951 2952 2953 |
- UBIFS support CONFIG_CMD_UBIFS Adds commands for interacting with UBI volumes formatted as UBIFS. UBIFS is read-only in u-boot. Requires UBI support as well as CONFIG_LZO |
147162dac ubi: ubifs: Turn ... |
2954 2955 2956 2957 |
CONFIG_UBIFS_SILENCE_MSG Make the verbose messages from UBIFS stop printing. This leaves warnings and errors enabled. |
6a11cf48a spl: add initial ... |
2958 |
- SPL framework |
04e5ae793 Minor coding styl... |
2959 2960 |
CONFIG_SPL Enable building of SPL globally. |
6a11cf48a spl: add initial ... |
2961 |
|
95579793b README: document ... |
2962 2963 |
CONFIG_SPL_LDSCRIPT LDSCRIPT for linking the SPL binary. |
6ebc34611 ARM: fix CONFIG_S... |
2964 2965 2966 2967 |
CONFIG_SPL_MAX_FOOTPRINT Maximum size in memory allocated to the SPL, BSS included. When defined, the linker checks that the actual memory used by SPL from _start to __bss_end does not exceed it. |
8960af8ba cosmetic: fix CON... |
2968 |
CONFIG_SPL_MAX_FOOTPRINT and CONFIG_SPL_BSS_MAX_SIZE |
6ebc34611 ARM: fix CONFIG_S... |
2969 |
must not be both defined at the same time. |
95579793b README: document ... |
2970 |
CONFIG_SPL_MAX_SIZE |
6ebc34611 ARM: fix CONFIG_S... |
2971 2972 2973 2974 |
Maximum size of the SPL image (text, data, rodata, and linker lists sections), BSS excluded. When defined, the linker checks that the actual size does not exceed it. |
95579793b README: document ... |
2975 |
|
04e5ae793 Minor coding styl... |
2976 2977 |
CONFIG_SPL_TEXT_BASE TEXT_BASE for linking the SPL binary. |
6a11cf48a spl: add initial ... |
2978 |
|
94a45bb19 powerpc/mpc85xx/p... |
2979 2980 2981 |
CONFIG_SPL_RELOC_TEXT_BASE Address to relocate to. If unspecified, this is equal to CONFIG_SPL_TEXT_BASE (i.e. no relocation is done). |
95579793b README: document ... |
2982 2983 2984 2985 |
CONFIG_SPL_BSS_START_ADDR Link address for the BSS within the SPL binary. CONFIG_SPL_BSS_MAX_SIZE |
6ebc34611 ARM: fix CONFIG_S... |
2986 2987 2988 |
Maximum size in memory allocated to the SPL BSS. When defined, the linker checks that the actual memory used by SPL from __bss_start to __bss_end does not exceed it. |
8960af8ba cosmetic: fix CON... |
2989 |
CONFIG_SPL_MAX_FOOTPRINT and CONFIG_SPL_BSS_MAX_SIZE |
6ebc34611 ARM: fix CONFIG_S... |
2990 |
must not be both defined at the same time. |
95579793b README: document ... |
2991 2992 2993 |
CONFIG_SPL_STACK Adress of the start of the stack SPL will use |
94a45bb19 powerpc/mpc85xx/p... |
2994 2995 2996 2997 |
CONFIG_SPL_RELOC_STACK Adress of the start of the stack SPL will use after relocation. If unspecified, this is equal to CONFIG_SPL_STACK. |
95579793b README: document ... |
2998 2999 3000 3001 3002 |
CONFIG_SYS_SPL_MALLOC_START Starting address of the malloc pool used in SPL. CONFIG_SYS_SPL_MALLOC_SIZE The size of the malloc pool used in SPL. |
6a11cf48a spl: add initial ... |
3003 |
|
47f7bcae8 SPL: Move the oma... |
3004 3005 3006 3007 |
CONFIG_SPL_FRAMEWORK Enable the SPL framework under common/. This framework supports MMC, NAND and YMODEM loading of U-Boot and NAND NAND loading of the Linux Kernel. |
861a86f46 omap-common: SPL:... |
3008 3009 3010 |
CONFIG_SPL_DISPLAY_PRINT For ARM, enable an optional function to print more information about the running system. |
4b919725b spl/powerpc: intr... |
3011 3012 |
CONFIG_SPL_INIT_MINIMAL Arch init code should be built for a very small image |
04e5ae793 Minor coding styl... |
3013 3014 |
CONFIG_SPL_LIBCOMMON_SUPPORT Support for common/libcommon.o in SPL binary |
6a11cf48a spl: add initial ... |
3015 |
|
04e5ae793 Minor coding styl... |
3016 3017 |
CONFIG_SPL_LIBDISK_SUPPORT Support for disk/libdisk.o in SPL binary |
6a11cf48a spl: add initial ... |
3018 |
|
04e5ae793 Minor coding styl... |
3019 3020 |
CONFIG_SPL_I2C_SUPPORT Support for drivers/i2c/libi2c.o in SPL binary |
6a11cf48a spl: add initial ... |
3021 |
|
04e5ae793 Minor coding styl... |
3022 3023 |
CONFIG_SPL_GPIO_SUPPORT Support for drivers/gpio/libgpio.o in SPL binary |
6a11cf48a spl: add initial ... |
3024 |
|
04e5ae793 Minor coding styl... |
3025 3026 |
CONFIG_SPL_MMC_SUPPORT Support for drivers/mmc/libmmc.o in SPL binary |
6a11cf48a spl: add initial ... |
3027 |
|
95579793b README: document ... |
3028 3029 3030 3031 3032 |
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR, CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS, CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION Address, size and partition on the MMC to load U-Boot from when the MMC is being used in raw mode. |
2b75b0ad3 spl_mmc: add Falc... |
3033 3034 3035 3036 3037 3038 3039 3040 3041 |
CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR Sector to load kernel uImage from when MMC is being used in raw mode (for Falcon mode) CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR, CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS Sector and number of sectors to load kernel argument parameters from when MMC is being used in raw mode (for falcon mode) |
95579793b README: document ... |
3042 3043 3044 3045 3046 |
CONFIG_SPL_FAT_SUPPORT Support for fs/fat/libfat.o in SPL binary CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME Filename to read to load U-Boot when reading from FAT |
7ad2cc796 spl_mmc: add Falc... |
3047 3048 3049 3050 3051 3052 3053 |
CONFIG_SPL_FAT_LOAD_KERNEL_NAME Filename to read to load kernel uImage when reading from FAT (for Falcon mode) CONFIG_SPL_FAT_LOAD_ARGS_NAME Filename to read to load kernel argument parameters when reading from FAT (for Falcon mode) |
06f60ae3e powerpc/mpc83xx: ... |
3054 3055 3056 3057 3058 |
CONFIG_SPL_MPC83XX_WAIT_FOR_NAND Set this for NAND SPL on PPC mpc83xx targets, so that start.S waits for the rest of the SPL to load before continuing (the hardware starts execution after just loading the first page rather than the full 4K). |
6f2f01b9f spl/nand: introdu... |
3059 3060 3061 3062 3063 3064 3065 3066 3067 |
CONFIG_SPL_NAND_BASE Include nand_base.c in the SPL. Requires CONFIG_SPL_NAND_DRIVERS. CONFIG_SPL_NAND_DRIVERS SPL uses normal NAND drivers, not minimal drivers. CONFIG_SPL_NAND_ECC Include standard software ECC in the SPL |
95579793b README: document ... |
3068 |
CONFIG_SPL_NAND_SIMPLE |
7d4b79552 spl/nand: config ... |
3069 3070 |
Support for NAND boot using simple NAND drivers that expose the cmd_ctrl() interface. |
95579793b README: document ... |
3071 |
|
bb0dc1084 powerpc: mpc85xx:... |
3072 3073 |
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT Set for the SPL on PPC mpc8xxx targets, support for |
5614e71b4 Driver/DDR: Movin... |
3074 |
drivers/ddr/fsl/libddr.o in SPL binary. |
bb0dc1084 powerpc: mpc85xx:... |
3075 |
|
7c8eea59b powerpc: p1022ds:... |
3076 3077 3078 |
CONFIG_SPL_COMMON_INIT_DDR Set for common ddr init with serial presence detect in SPL binary. |
95579793b README: document ... |
3079 3080 3081 3082 3083 3084 |
CONFIG_SYS_NAND_5_ADDR_CYCLE, CONFIG_SYS_NAND_PAGE_COUNT, CONFIG_SYS_NAND_PAGE_SIZE, CONFIG_SYS_NAND_OOBSIZE, CONFIG_SYS_NAND_BLOCK_SIZE, CONFIG_SYS_NAND_BAD_BLOCK_POS, CONFIG_SYS_NAND_ECCPOS, CONFIG_SYS_NAND_ECCSIZE, CONFIG_SYS_NAND_ECCBYTES Defines the size and behavior of the NAND that SPL uses |
7d4b79552 spl/nand: config ... |
3085 |
to read U-Boot |
95579793b README: document ... |
3086 |
|
fbe76ae4e board/freescale:R... |
3087 3088 |
CONFIG_SPL_NAND_BOOT Add support NAND boot |
95579793b README: document ... |
3089 |
CONFIG_SYS_NAND_U_BOOT_OFFS |
7d4b79552 spl/nand: config ... |
3090 3091 3092 3093 3094 3095 3096 |
Location in NAND to read U-Boot from CONFIG_SYS_NAND_U_BOOT_DST Location in memory to load U-Boot to CONFIG_SYS_NAND_U_BOOT_SIZE Size of image to load |
95579793b README: document ... |
3097 3098 |
CONFIG_SYS_NAND_U_BOOT_START |
7d4b79552 spl/nand: config ... |
3099 |
Entry point in loaded image to jump to |
95579793b README: document ... |
3100 3101 3102 3103 3104 3105 3106 3107 |
CONFIG_SYS_NAND_HW_ECC_OOBFIRST Define this if you need to first read the OOB and then the data. This is used for example on davinci plattforms. CONFIG_SPL_OMAP3_ID_NAND Support for an OMAP3-specific set of functions to return the ID and MFR of the first attached NAND chip, if present. |
04e5ae793 Minor coding styl... |
3108 3109 |
CONFIG_SPL_SERIAL_SUPPORT Support for drivers/serial/libserial.o in SPL binary |
6a11cf48a spl: add initial ... |
3110 |
|
04e5ae793 Minor coding styl... |
3111 3112 |
CONFIG_SPL_SPI_FLASH_SUPPORT Support for drivers/mtd/spi/libspi_flash.o in SPL binary |
6a11cf48a spl: add initial ... |
3113 |
|
04e5ae793 Minor coding styl... |
3114 3115 |
CONFIG_SPL_SPI_SUPPORT Support for drivers/spi/libspi.o in SPL binary |
c57b953da SPL: Add support ... |
3116 3117 3118 |
CONFIG_SPL_RAM_DEVICE Support for running image already present in ram, in SPL binary |
6a11cf48a spl: add initial ... |
3119 |
|
04e5ae793 Minor coding styl... |
3120 3121 |
CONFIG_SPL_LIBGENERIC_SUPPORT Support for lib/libgeneric.o in SPL binary |
1372cce2b [new uImage] Use ... |
3122 |
|
ba1bee43e common/Makefile: ... |
3123 3124 3125 3126 3127 3128 3129 |
CONFIG_SPL_ENV_SUPPORT Support for the environment operating in SPL binary CONFIG_SPL_NET_SUPPORT Support for the net/libnet.o in SPL binary. It conflicts with SPL env from storage medium specified by CONFIG_ENV_IS_xxx but CONFIG_ENV_IS_NOWHERE |
74752baa7 spl: Change PAD_T... |
3130 |
CONFIG_SPL_PAD_TO |
6113d3f27 Makefile: Change ... |
3131 3132 3133 3134 3135 |
Image offset to which the SPL should be padded before appending the SPL payload. By default, this is defined as CONFIG_SPL_MAX_SIZE, or 0 if CONFIG_SPL_MAX_SIZE is undefined. CONFIG_SPL_PAD_TO must be either 0, meaning to append the SPL payload without any padding, or >= CONFIG_SPL_MAX_SIZE. |
74752baa7 spl: Change PAD_T... |
3136 |
|
ca2fca223 spl: introduce CO... |
3137 3138 3139 3140 |
CONFIG_SPL_TARGET Final target image containing SPL and payload. Some SPLs use an arch-specific makefile fragment instead, for example if more than one image needs to be produced. |
87ebee39e image: Add CONFIG... |
3141 3142 3143 3144 3145 |
CONFIG_FIT_SPL_PRINT Printing information about a FIT image adds quite a bit of code to SPL. So this is normally disabled in SPL. Use this option to re-enable it. This will affect the output of the bootm command when booting a FIT image. |
3aa29de0b TPL : introduce t... |
3146 3147 3148 3149 3150 3151 3152 |
- TPL framework CONFIG_TPL Enable building of TPL globally. CONFIG_TPL_PAD_TO Image offset to which the TPL should be padded before appending the TPL payload. By default, this is defined as |
93e145964 Coding Style clea... |
3153 3154 3155 |
CONFIG_SPL_MAX_SIZE, or 0 if CONFIG_SPL_MAX_SIZE is undefined. CONFIG_SPL_PAD_TO must be either 0, meaning to append the SPL payload without any padding, or >= CONFIG_SPL_MAX_SIZE. |
3aa29de0b TPL : introduce t... |
3156 |
|
c609719b8 Initial revision |
3157 3158 |
Modem Support: -------------- |
566e5cf45 ARM: drop unsuppo... |
3159 |
[so far only for SMDK2400 boards] |
c609719b8 Initial revision |
3160 |
|
11ccc33fa Many spelling fix... |
3161 |
- Modem support enable: |
c609719b8 Initial revision |
3162 3163 3164 3165 3166 3167 3168 |
CONFIG_MODEM_SUPPORT - RTS/CTS Flow control enable: CONFIG_HWFLOW - Modem debug support: CONFIG_MODEM_SUPPORT_DEBUG |
43d9616cf * Patch by Robert... |
3169 3170 |
Enables debugging stuff (char screen[1024], dbg()) for modem support. Useful only with BDI2000. |
c609719b8 Initial revision |
3171 |
|
a8c7c708a * Patch by Gleb N... |
3172 |
- Interrupt support (PPC): |
d4ca31c40 * Cleanup lowboot... |
3173 3174 |
There are common interrupt_init() and timer_interrupt() for all PPC archs. interrupt_init() calls interrupt_init_cpu() |
11ccc33fa Many spelling fix... |
3175 |
for CPU specific initialization. interrupt_init_cpu() |
d4ca31c40 * Cleanup lowboot... |
3176 |
should set decrementer_count to appropriate value. If |
11ccc33fa Many spelling fix... |
3177 |
CPU resets decrementer automatically after interrupt |
d4ca31c40 * Cleanup lowboot... |
3178 |
(ppc4xx) it should set decrementer_count to zero. |
11ccc33fa Many spelling fix... |
3179 |
timer_interrupt() calls timer_interrupt_cpu() for CPU |
d4ca31c40 * Cleanup lowboot... |
3180 3181 3182 |
specific handling. If board has watchdog / status_led / other_activity_monitor it works automatically from general timer_interrupt(). |
a8c7c708a * Patch by Gleb N... |
3183 |
|
c609719b8 Initial revision |
3184 |
- General: |
43d9616cf * Patch by Robert... |
3185 3186 3187 |
In the target system modem support is enabled when a specific key (key combination) is pressed during power-on. Otherwise U-Boot will boot normally |
11ccc33fa Many spelling fix... |
3188 |
(autoboot). The key_pressed() function is called from |
43d9616cf * Patch by Robert... |
3189 3190 3191 |
board_init(). Currently key_pressed() is a dummy function, returning 1 and thus enabling modem initialization. |
c609719b8 Initial revision |
3192 |
|
43d9616cf * Patch by Robert... |
3193 3194 3195 |
If there are no modem init strings in the environment, U-Boot proceed to autoboot; the previous output (banner, info printfs) will be |
11ccc33fa Many spelling fix... |
3196 |
suppressed, though. |
c609719b8 Initial revision |
3197 3198 |
See also: doc/README.Modem |
9660e442d cosmetic: s/BOARD... |
3199 3200 3201 3202 3203 3204 3205 3206 3207 3208 3209 3210 3211 3212 |
Board initialization settings: ------------------------------ During Initialization u-boot calls a number of board specific functions to allow the preparation of board specific prerequisites, e.g. pin setup before drivers are initialized. To enable these callbacks the following configuration macros have to be defined. Currently this is architecture specific, so please check arch/your_architecture/lib/board.c typically in board_init_f() and board_init_r(). - CONFIG_BOARD_EARLY_INIT_F: Call board_early_init_f() - CONFIG_BOARD_EARLY_INIT_R: Call board_early_init_r() - CONFIG_BOARD_LATE_INIT: Call board_late_init() - CONFIG_BOARD_POSTCLK_INIT: Call board_postclk_init() |
c609719b8 Initial revision |
3213 |
|
c609719b8 Initial revision |
3214 3215 |
Configuration Settings: ----------------------- |
4d1fd7f1a Add 64-bit data s... |
3216 3217 |
- CONFIG_SYS_SUPPORT_64BIT_DATA: Defined automatically if compiled as 64-bit. Optionally it can be defined to support 64-bit memory commands. |
6d0f6bcf3 rename CFG_ macro... |
3218 |
- CONFIG_SYS_LONGHELP: Defined when you want long help messages included; |
c609719b8 Initial revision |
3219 |
undefine this when you're short of memory. |
2fb2604d5 Command usage cle... |
3220 3221 |
- CONFIG_SYS_HELP_CMD_WIDTH: Defined when you want to override the default width of the commands listed in the 'help' command output. |
6d0f6bcf3 rename CFG_ macro... |
3222 |
- CONFIG_SYS_PROMPT: This is what U-Boot prints on the console to |
c609719b8 Initial revision |
3223 |
prompt for user input. |
6d0f6bcf3 rename CFG_ macro... |
3224 |
- CONFIG_SYS_CBSIZE: Buffer size for input from the Console |
c609719b8 Initial revision |
3225 |
|
6d0f6bcf3 rename CFG_ macro... |
3226 |
- CONFIG_SYS_PBSIZE: Buffer size for Console output |
c609719b8 Initial revision |
3227 |
|
6d0f6bcf3 rename CFG_ macro... |
3228 |
- CONFIG_SYS_MAXARGS: max. Number of arguments accepted for monitor commands |
c609719b8 Initial revision |
3229 |
|
6d0f6bcf3 rename CFG_ macro... |
3230 |
- CONFIG_SYS_BARGSIZE: Buffer size for Boot Arguments which are passed to |
c609719b8 Initial revision |
3231 3232 |
the application (usually a Linux kernel) when it is booted |
6d0f6bcf3 rename CFG_ macro... |
3233 |
- CONFIG_SYS_BAUDRATE_TABLE: |
c609719b8 Initial revision |
3234 |
List of legal baudrate settings for this board. |
6d0f6bcf3 rename CFG_ macro... |
3235 |
- CONFIG_SYS_CONSOLE_INFO_QUIET |
8bde7f776 * Code cleanup: |
3236 |
Suppress display of console information at boot. |
c609719b8 Initial revision |
3237 |
|
6d0f6bcf3 rename CFG_ macro... |
3238 |
- CONFIG_SYS_CONSOLE_IS_IN_ENV |
8bde7f776 * Code cleanup: |
3239 3240 3241 |
If the board specific function extern int overwrite_console (void); returns 1, the stdin, stderr and stdout are switched to the |
c609719b8 Initial revision |
3242 |
serial port, else the settings in the environment are used. |
6d0f6bcf3 rename CFG_ macro... |
3243 |
- CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE |
8bde7f776 * Code cleanup: |
3244 |
Enable the call to overwrite_console(). |
c609719b8 Initial revision |
3245 |
|
6d0f6bcf3 rename CFG_ macro... |
3246 |
- CONFIG_SYS_CONSOLE_ENV_OVERWRITE |
c609719b8 Initial revision |
3247 |
Enable overwrite of previous console environment settings. |
6d0f6bcf3 rename CFG_ macro... |
3248 |
- CONFIG_SYS_MEMTEST_START, CONFIG_SYS_MEMTEST_END: |
c609719b8 Initial revision |
3249 3250 |
Begin and End addresses of the area used by the simple memory test. |
6d0f6bcf3 rename CFG_ macro... |
3251 |
- CONFIG_SYS_ALT_MEMTEST: |
8bde7f776 * Code cleanup: |
3252 |
Enable an alternate, more extensive memory test. |
c609719b8 Initial revision |
3253 |
|
6d0f6bcf3 rename CFG_ macro... |
3254 |
- CONFIG_SYS_MEMTEST_SCRATCH: |
5f535fe17 * Patches by Ande... |
3255 3256 |
Scratch address used by the alternate memory test You only need to set this if address zero isn't writeable |
6d0f6bcf3 rename CFG_ macro... |
3257 3258 |
- CONFIG_SYS_MEM_TOP_HIDE (PPC only): If CONFIG_SYS_MEM_TOP_HIDE is defined in the board config header, |
14f73ca67 ppc: Add CFG_MEM_... |
3259 |
this specified memory area will get subtracted from the top |
11ccc33fa Many spelling fix... |
3260 |
(end) of RAM and won't get "touched" at all by U-Boot. By |
14f73ca67 ppc: Add CFG_MEM_... |
3261 3262 3263 |
fixing up gd->ram_size the Linux kernel should gets passed the now "corrected" memory size and won't touch it either. This should work for arch/ppc and arch/powerpc. Only Linux |
5e12e75d1 ppc: Small change... |
3264 |
board ports in arch/powerpc with bootwrapper support that |
14f73ca67 ppc: Add CFG_MEM_... |
3265 |
recalculate the memory size from the SDRAM controller setup |
5e12e75d1 ppc: Small change... |
3266 |
will have to get fixed in Linux additionally. |
14f73ca67 ppc: Add CFG_MEM_... |
3267 3268 3269 3270 3271 3272 3273 3274 3275 3276 |
This option can be used as a workaround for the 440EPx/GRx CHIP 11 errata where the last 256 bytes in SDRAM shouldn't be touched. WARNING: Please make sure that this value is a multiple of the Linux page size (normally 4k). If this is not the case, then the end address of the Linux memory will be located at a non page size aligned address and this could cause major problems. |
6d0f6bcf3 rename CFG_ macro... |
3277 |
- CONFIG_SYS_LOADS_BAUD_CHANGE: |
c609719b8 Initial revision |
3278 |
Enable temporary baudrate change while serial download |
6d0f6bcf3 rename CFG_ macro... |
3279 |
- CONFIG_SYS_SDRAM_BASE: |
c609719b8 Initial revision |
3280 |
Physical start address of SDRAM. _Must_ be 0 here. |
6d0f6bcf3 rename CFG_ macro... |
3281 |
- CONFIG_SYS_MBIO_BASE: |
c609719b8 Initial revision |
3282 3283 |
Physical start address of Motherboard I/O (if using a Cogent motherboard) |
6d0f6bcf3 rename CFG_ macro... |
3284 |
- CONFIG_SYS_FLASH_BASE: |
c609719b8 Initial revision |
3285 |
Physical start address of Flash memory. |
6d0f6bcf3 rename CFG_ macro... |
3286 |
- CONFIG_SYS_MONITOR_BASE: |
c609719b8 Initial revision |
3287 3288 |
Physical start address of boot monitor code (set by make config files to be same as the text base address |
14d0a02a1 Rename TEXT_BASE ... |
3289 |
(CONFIG_SYS_TEXT_BASE) used when linking) - same as |
6d0f6bcf3 rename CFG_ macro... |
3290 |
CONFIG_SYS_FLASH_BASE when booting from flash. |
c609719b8 Initial revision |
3291 |
|
6d0f6bcf3 rename CFG_ macro... |
3292 |
- CONFIG_SYS_MONITOR_LEN: |
8bde7f776 * Code cleanup: |
3293 3294 3295 3296 |
Size of memory reserved for monitor code, used to determine _at_compile_time_ (!) if the environment is embedded within the U-Boot image, or in a separate flash sector. |
c609719b8 Initial revision |
3297 |
|
6d0f6bcf3 rename CFG_ macro... |
3298 |
- CONFIG_SYS_MALLOC_LEN: |
c609719b8 Initial revision |
3299 |
Size of DRAM reserved for malloc() use. |
6d0f6bcf3 rename CFG_ macro... |
3300 |
- CONFIG_SYS_BOOTM_LEN: |
15940c9af Change max size o... |
3301 3302 |
Normally compressed uImages are limited to an uncompressed size of 8 MBytes. If this is not enough, |
6d0f6bcf3 rename CFG_ macro... |
3303 |
you can define CONFIG_SYS_BOOTM_LEN in your board config file |
15940c9af Change max size o... |
3304 |
to adjust this setting to your needs. |
6d0f6bcf3 rename CFG_ macro... |
3305 |
- CONFIG_SYS_BOOTMAPSZ: |
c609719b8 Initial revision |
3306 3307 |
Maximum size of memory mapped by the startup code of the Linux kernel; all data that must be processed by |
7d721e34a Boot-related docu... |
3308 3309 |
the Linux kernel (bd_info, boot arguments, FDT blob if used) must be put below this limit, unless "bootm_low" |
1bce2aeb6 Cosmetic: Fix a n... |
3310 |
environment variable is defined and non-zero. In such case |
7d721e34a Boot-related docu... |
3311 |
all data for the Linux kernel must be between "bootm_low" |
c0f40859f README: white-spa... |
3312 |
and "bootm_low" + CONFIG_SYS_BOOTMAPSZ. The environment |
c3624e6ed Default to bootm_... |
3313 3314 3315 |
variable "bootm_mapsize" will override the value of CONFIG_SYS_BOOTMAPSZ. If CONFIG_SYS_BOOTMAPSZ is undefined, then the value in "bootm_size" will be used instead. |
c609719b8 Initial revision |
3316 |
|
fca43cc80 boot: change some... |
3317 3318 3319 3320 3321 3322 3323 3324 3325 3326 3327 3328 |
- CONFIG_SYS_BOOT_RAMDISK_HIGH: Enable initrd_high functionality. If defined then the initrd_high feature is enabled and the bootm ramdisk subcommand is enabled. - CONFIG_SYS_BOOT_GET_CMDLINE: Enables allocating and saving kernel cmdline in space between "bootm_low" and "bootm_low" + BOOTMAPSZ. - CONFIG_SYS_BOOT_GET_KBD: Enables allocating and saving a kernel copy of the bd_info in space between "bootm_low" and "bootm_low" + BOOTMAPSZ. |
6d0f6bcf3 rename CFG_ macro... |
3329 |
- CONFIG_SYS_MAX_FLASH_BANKS: |
c609719b8 Initial revision |
3330 |
Max number of Flash memory banks |
6d0f6bcf3 rename CFG_ macro... |
3331 |
- CONFIG_SYS_MAX_FLASH_SECT: |
c609719b8 Initial revision |
3332 |
Max number of sectors on a Flash chip |
6d0f6bcf3 rename CFG_ macro... |
3333 |
- CONFIG_SYS_FLASH_ERASE_TOUT: |
c609719b8 Initial revision |
3334 |
Timeout for Flash erase operations (in ms) |
6d0f6bcf3 rename CFG_ macro... |
3335 |
- CONFIG_SYS_FLASH_WRITE_TOUT: |
c609719b8 Initial revision |
3336 |
Timeout for Flash write operations (in ms) |
6d0f6bcf3 rename CFG_ macro... |
3337 |
- CONFIG_SYS_FLASH_LOCK_TOUT |
8564acf93 * Patches by Yuli... |
3338 |
Timeout for Flash set sector lock bit operation (in ms) |
6d0f6bcf3 rename CFG_ macro... |
3339 |
- CONFIG_SYS_FLASH_UNLOCK_TOUT |
8564acf93 * Patches by Yuli... |
3340 |
Timeout for Flash clear lock bits operation (in ms) |
6d0f6bcf3 rename CFG_ macro... |
3341 |
- CONFIG_SYS_FLASH_PROTECTION |
8564acf93 * Patches by Yuli... |
3342 3343 |
If defined, hardware flash sectors protection is used instead of U-Boot software protection. |
6d0f6bcf3 rename CFG_ macro... |
3344 |
- CONFIG_SYS_DIRECT_FLASH_TFTP: |
c609719b8 Initial revision |
3345 3346 3347 3348 3349 3350 3351 3352 |
Enable TFTP transfers directly to flash memory; without this option such a download has to be performed in two steps: (1) download to RAM, and (2) copy from RAM to flash. The two-step approach is usually more reliable, since you can check if the download worked before you erase |
11ccc33fa Many spelling fix... |
3353 3354 |
the flash, but in some situations (when system RAM is too limited to allow for a temporary copy of the |
c609719b8 Initial revision |
3355 |
downloaded image) this option may be very useful. |
6d0f6bcf3 rename CFG_ macro... |
3356 |
- CONFIG_SYS_FLASH_CFI: |
43d9616cf * Patch by Robert... |
3357 |
Define if the flash driver uses extra elements in the |
5653fc335 * Patch by Yuli B... |
3358 |
common flash structure for storing flash geometry. |
00b1883a4 drivers/mtd: Move... |
3359 |
- CONFIG_FLASH_CFI_DRIVER |
5653fc335 * Patch by Yuli B... |
3360 3361 |
This option also enables the building of the cfi_flash driver in the drivers directory |
c609719b8 Initial revision |
3362 |
|
91809ed51 cfi-mtd: Add cfi-... |
3363 3364 3365 3366 |
- CONFIG_FLASH_CFI_MTD This option enables the building of the cfi_mtd driver in the drivers directory. The driver exports CFI flash to the MTD layer. |
6d0f6bcf3 rename CFG_ macro... |
3367 |
- CONFIG_SYS_FLASH_USE_BUFFER_WRITE |
96ef831f7 cfi_flash: Suppor... |
3368 3369 3370 3371 3372 |
Use buffered writes to flash. - CONFIG_FLASH_SPANSION_S29WS_N s29ws-n MirrorBit flash has non-standard addresses for buffered write commands. |
6d0f6bcf3 rename CFG_ macro... |
3373 |
- CONFIG_SYS_FLASH_QUIET_TEST |
5568e613e Add support for P... |
3374 3375 3376 3377 |
If this option is defined, the common CFI flash doesn't print it's warning upon not recognized FLASH banks. This is useful, if some of the configured banks are only optionally available. |
9a042e9ca Flash programming... |
3378 3379 3380 3381 |
- CONFIG_FLASH_SHOW_PROGRESS If defined (must be an integer), print out countdown digits and dots. Recommended value: 45 (9..1) for 80 column displays, 15 (3..1) for 40 column displays. |
352ef3f1b flash: Add option... |
3382 3383 3384 3385 3386 3387 3388 3389 |
- CONFIG_FLASH_VERIFY If defined, the content of the flash (destination) is compared against the source after the write operation. An error message will be printed when the contents are not identical. Please note that this option is useless in nearly all cases, since such flash programming errors usually are detected earlier while unprotecting/erasing/programming. Please only enable this option if you really know what you are doing. |
6d0f6bcf3 rename CFG_ macro... |
3390 |
- CONFIG_SYS_RX_ETH_BUFFER: |
11ccc33fa Many spelling fix... |
3391 3392 |
Defines the number of Ethernet receive buffers. On some Ethernet controllers it is recommended to set this value |
53cf9435c - CFG_RX_ETH_BUFF... |
3393 3394 |
to 8 or even higher (EEPRO100 or 405 EMAC), since all buffers can be full shortly after enabling the interface |
11ccc33fa Many spelling fix... |
3395 |
on high Ethernet traffic. |
53cf9435c - CFG_RX_ETH_BUFF... |
3396 |
Defaults to 4 if not defined. |
ea882baf9 New implementatio... |
3397 |
- CONFIG_ENV_MAX_ENTRIES |
071bc9233 Coding Style cleanup |
3398 3399 3400 3401 3402 |
Maximum number of entries in the hash table that is used internally to store the environment settings. The default setting is supposed to be generous and should work in most cases. This setting can be used to tune behaviour; see lib/hashtable.c for details. |
ea882baf9 New implementatio... |
3403 |
|
2598090b7 env: Add environm... |
3404 3405 |
- CONFIG_ENV_FLAGS_LIST_DEFAULT - CONFIG_ENV_FLAGS_LIST_STATIC |
1bce2aeb6 Cosmetic: Fix a n... |
3406 |
Enable validation of the values given to environment variables when |
2598090b7 env: Add environm... |
3407 3408 3409 3410 3411 3412 |
calling env set. Variables can be restricted to only decimal, hexadecimal, or boolean. If CONFIG_CMD_NET is also defined, the variables can also be restricted to IP address or MAC address. The format of the list is: type_attribute = [s|d|x|b|i|m] |
267541f77 env: Add support ... |
3413 3414 |
access_atribute = [a|r|o|c] attributes = type_attribute[access_atribute] |
2598090b7 env: Add environm... |
3415 3416 3417 3418 3419 3420 3421 3422 3423 3424 |
entry = variable_name[:attributes] list = entry[,list] The type attributes are: s - String (default) d - Decimal x - Hexadecimal b - Boolean ([1yYtT|0nNfF]) i - IP address m - MAC address |
267541f77 env: Add support ... |
3425 3426 3427 3428 3429 |
The access attributes are: a - Any (default) r - Read-only o - Write-once c - Change-default |
2598090b7 env: Add environm... |
3430 3431 3432 3433 3434 3435 3436 3437 3438 3439 |
- CONFIG_ENV_FLAGS_LIST_DEFAULT Define this to a list (string) to define the ".flags" envirnoment variable in the default or embedded environment. - CONFIG_ENV_FLAGS_LIST_STATIC Define this to a list (string) to define validation that should be done if an entry is not found in the ".flags" environment variable. To override a setting in the static list, simply add an entry for the same variable name to the ".flags" variable. |
267541f77 env: Add support ... |
3440 3441 3442 |
- CONFIG_ENV_ACCESS_IGNORE_FORCE If defined, don't allow the -f switch to env set override variable access flags. |
5c1a7ea6a __HAVE_ARCH_GENER... |
3443 3444 3445 3446 3447 3448 3449 3450 3451 |
- CONFIG_SYS_GENERIC_BOARD This selects the architecture-generic board system instead of the architecture-specific board files. It is intended to move boards to this new framework over time. Defining this will disable the arch/foo/lib/board.c file and use common/board_f.c and common/board_r.c instead. To use this option your architecture must support it (i.e. must define __HAVE_ARCH_GENERIC_BOARD in its config.mk file). If you find problems enabling this option on your board please report the problem and send patches! |
0b1b60c77 ARM: OMAP5: Fix w... |
3452 3453 3454 3455 |
- CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC (OMAP only) This is set by OMAP boards for the max time that reset should be asserted. See doc/README.omap-reset-time for details on how the value can be calulated on a given board. |
632efa744 Add CONFIG_SYS_SY... |
3456 |
|
c609719b8 Initial revision |
3457 3458 3459 |
The following definitions that deal with the placement and management of environment data (variable area); in general, we support the following configurations: |
c3eb3fe49 env: allow people... |
3460 3461 3462 3463 |
- CONFIG_BUILD_ENVCRC: Builds up envcrc with the target environment so that external utils may easily extract it and embed it in final U-Boot images. |
5a1aceb06 rename CFG_ENV_IS... |
3464 |
- CONFIG_ENV_IS_IN_FLASH: |
c609719b8 Initial revision |
3465 3466 3467 3468 3469 3470 3471 3472 3473 3474 3475 3476 3477 3478 |
Define this if the environment is in flash memory. a) The environment occupies one whole flash sector, which is "embedded" in the text segment with the U-Boot code. This happens usually with "bottom boot sector" or "top boot sector" type flash chips, which have several smaller sectors at the start or the end. For instance, such a layout can have sector sizes of 8, 2x4, 16, Nx32 kB. In such a case you would place the environment in one of the 4 kB sectors - with U-Boot code before and after it. With "top boot sector" type flash chips, you would put the environment in one of the last sectors, leaving a gap between U-Boot and the environment. |
0e8d15866 rename CFG_ENV ma... |
3479 |
- CONFIG_ENV_OFFSET: |
c609719b8 Initial revision |
3480 3481 3482 3483 3484 |
Offset of environment data (variable area) to the beginning of flash memory; for instance, with bottom boot type flash chips the second sector can be used: the offset for this sector is given here. |
6d0f6bcf3 rename CFG_ macro... |
3485 |
CONFIG_ENV_OFFSET is used relative to CONFIG_SYS_FLASH_BASE. |
c609719b8 Initial revision |
3486 |
|
0e8d15866 rename CFG_ENV ma... |
3487 |
- CONFIG_ENV_ADDR: |
c609719b8 Initial revision |
3488 3489 3490 |
This is just another way to specify the start address of the flash sector containing the environment (instead of |
0e8d15866 rename CFG_ENV ma... |
3491 |
CONFIG_ENV_OFFSET). |
c609719b8 Initial revision |
3492 |
|
0e8d15866 rename CFG_ENV ma... |
3493 |
- CONFIG_ENV_SECT_SIZE: |
c609719b8 Initial revision |
3494 3495 3496 3497 3498 3499 3500 |
Size of the sector containing the environment. b) Sometimes flash chips have few, equal sized, BIG sectors. In such a case you don't want to spend a whole sector for the environment. |
0e8d15866 rename CFG_ENV ma... |
3501 |
- CONFIG_ENV_SIZE: |
c609719b8 Initial revision |
3502 |
|
5a1aceb06 rename CFG_ENV_IS... |
3503 |
If you use this in combination with CONFIG_ENV_IS_IN_FLASH |
0e8d15866 rename CFG_ENV ma... |
3504 |
and CONFIG_ENV_SECT_SIZE, you can specify to use only a part |
c609719b8 Initial revision |
3505 3506 3507 3508 3509 3510 3511 3512 3513 3514 3515 3516 |
of this flash sector for the environment. This saves memory for the RAM copy of the environment. It may also save flash memory if you decide to use this when your environment is "embedded" within U-Boot code, since then the remainder of the flash sector could be used for U-Boot code. It should be pointed out that this is STRONGLY DISCOURAGED from a robustness point of view: updating the environment in flash makes it always necessary to erase the WHOLE sector. If something goes wrong before the contents has been restored from a copy in RAM, your target system will be dead. |
0e8d15866 rename CFG_ENV ma... |
3517 3518 |
- CONFIG_ENV_ADDR_REDUND CONFIG_ENV_SIZE_REDUND |
c609719b8 Initial revision |
3519 |
|
43d9616cf * Patch by Robert... |
3520 |
These settings describe a second storage area used to hold |
11ccc33fa Many spelling fix... |
3521 |
a redundant copy of the environment data, so that there is |
3e38691e8 * Patch by Arun D... |
3522 |
a valid backup copy in case there is a power failure during |
43d9616cf * Patch by Robert... |
3523 |
a "saveenv" operation. |
c609719b8 Initial revision |
3524 3525 3526 3527 |
BE CAREFUL! Any changes to the flash layout, and some changes to the source code will make it necessary to adapt <board>/u-boot.lds* accordingly! |
9314cee69 rename CFG_ENV_IS... |
3528 |
- CONFIG_ENV_IS_IN_NVRAM: |
c609719b8 Initial revision |
3529 3530 3531 3532 |
Define this if you have some non-volatile memory device (NVRAM, battery buffered SRAM) which you want to use for the environment. |
0e8d15866 rename CFG_ENV ma... |
3533 3534 |
- CONFIG_ENV_ADDR: - CONFIG_ENV_SIZE: |
c609719b8 Initial revision |
3535 |
|
11ccc33fa Many spelling fix... |
3536 |
These two #defines are used to determine the memory area you |
c609719b8 Initial revision |
3537 3538 3539 3540 3541 3542 |
want to use for environment. It is assumed that this memory can just be read and written to, without any special provision. BE CAREFUL! The first access to the environment happens quite early in U-Boot initalization (when we try to get the setting of for the |
11ccc33fa Many spelling fix... |
3543 |
console baudrate). You *MUST* have mapped your NVRAM area then, or |
c609719b8 Initial revision |
3544 3545 3546 3547 3548 3549 |
U-Boot will hang. Please note that even with NVRAM we still use a copy of the environment in RAM: we could work on NVRAM directly, but we want to keep settings there always unmodified except somebody uses "saveenv" to save the current settings. |
bb1f8b4f8 rename CFG_ENV_IS... |
3550 |
- CONFIG_ENV_IS_IN_EEPROM: |
c609719b8 Initial revision |
3551 3552 3553 |
Use this if you have an EEPROM or similar serial access device and a driver for it. |
0e8d15866 rename CFG_ENV ma... |
3554 3555 |
- CONFIG_ENV_OFFSET: - CONFIG_ENV_SIZE: |
c609719b8 Initial revision |
3556 3557 3558 |
These two #defines specify the offset and size of the environment area within the total memory of your EEPROM. |
6d0f6bcf3 rename CFG_ macro... |
3559 |
- CONFIG_SYS_I2C_EEPROM_ADDR: |
c609719b8 Initial revision |
3560 3561 |
If defined, specified the chip address of the EEPROM device. The default address is zero. |
6d0f6bcf3 rename CFG_ macro... |
3562 |
- CONFIG_SYS_EEPROM_PAGE_WRITE_BITS: |
c609719b8 Initial revision |
3563 3564 3565 |
If defined, the number of bits used to address bytes in a single page in the EEPROM device. A 64 byte page, for example would require six bits. |
6d0f6bcf3 rename CFG_ macro... |
3566 |
- CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS: |
c609719b8 Initial revision |
3567 |
If defined, the number of milliseconds to delay between |
ba56f6257 Patch by Travis S... |
3568 |
page writes. The default is zero milliseconds. |
c609719b8 Initial revision |
3569 |
|
6d0f6bcf3 rename CFG_ macro... |
3570 |
- CONFIG_SYS_I2C_EEPROM_ADDR_LEN: |
c609719b8 Initial revision |
3571 3572 |
The length in bytes of the EEPROM memory array address. Note that this is NOT the chip address length! |
6d0f6bcf3 rename CFG_ macro... |
3573 |
- CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW: |
5cf91d6bd * Modify KUP4X bo... |
3574 3575 3576 3577 3578 3579 3580 3581 3582 |
EEPROM chips that implement "address overflow" are ones like Catalyst 24WC04/08/16 which has 9/10/11 bits of address and the extra bits end up in the "chip address" bit slots. This makes a 24WC08 (1Kbyte) chip look like four 256 byte chips. Note that we consider the length of the address field to still be one byte because the extra address bits are hidden in the chip address. |
6d0f6bcf3 rename CFG_ macro... |
3583 |
- CONFIG_SYS_EEPROM_SIZE: |
c609719b8 Initial revision |
3584 |
The size in bytes of the EEPROM device. |
548738b4d cmd_eeprom: I2C u... |
3585 3586 3587 3588 3589 3590 3591 3592 |
- CONFIG_ENV_EEPROM_IS_ON_I2C define this, if you have I2C and SPI activated, and your EEPROM, which holds the environment, is on the I2C bus. - CONFIG_I2C_ENV_EEPROM_BUS if you have an Environment on an EEPROM reached over I2C muxes, you can define here, how to reach this EEPROM. For example: |
ea818dbbc i2c, soft-i2c: sw... |
3593 |
#define CONFIG_I2C_ENV_EEPROM_BUS 1 |
548738b4d cmd_eeprom: I2C u... |
3594 3595 3596 |
EEPROM which holds the environment, is reached over a pca9547 i2c mux with address 0x70, channel 3. |
c609719b8 Initial revision |
3597 |
|
057c849c4 rename CFG_ENV_IS... |
3598 |
- CONFIG_ENV_IS_IN_DATAFLASH: |
5779d8d98 * Patch by Nicola... |
3599 |
|
d4ca31c40 * Cleanup lowboot... |
3600 |
Define this if you have a DataFlash memory device which you |
5779d8d98 * Patch by Nicola... |
3601 |
want to use for the environment. |
0e8d15866 rename CFG_ENV ma... |
3602 3603 3604 |
- CONFIG_ENV_OFFSET: - CONFIG_ENV_ADDR: - CONFIG_ENV_SIZE: |
5779d8d98 * Patch by Nicola... |
3605 3606 3607 3608 |
These three #defines specify the offset and size of the environment area within the total memory of your DataFlash placed at the specified address. |
0a85a9e70 powerpc/corenet_d... |
3609 3610 3611 3612 3613 3614 3615 3616 3617 3618 3619 |
- CONFIG_ENV_IS_IN_REMOTE: Define this if you have a remote memory space which you want to use for the local device's environment. - CONFIG_ENV_ADDR: - CONFIG_ENV_SIZE: These two #defines specify the address and size of the environment area within the remote memory space. The local device can get the environment from remote memory |
fc54c7fa0 powerpc/corenet_d... |
3620 |
space by SRIO or PCIE links. |
0a85a9e70 powerpc/corenet_d... |
3621 3622 3623 |
BE CAREFUL! For some special cases, the local device can not use "saveenv" command. For example, the local device will get the |
fc54c7fa0 powerpc/corenet_d... |
3624 3625 |
environment stored in a remote NOR flash by SRIO or PCIE link, but it can not erase, write this NOR flash by SRIO or PCIE interface. |
0a85a9e70 powerpc/corenet_d... |
3626 |
|
51bfee192 rename CFG_ENV_IS... |
3627 |
- CONFIG_ENV_IS_IN_NAND: |
13a5695b7 Patch by Jian Zha... |
3628 3629 3630 |
Define this if you have a NAND device which you want to use for the environment. |
0e8d15866 rename CFG_ENV ma... |
3631 3632 |
- CONFIG_ENV_OFFSET: - CONFIG_ENV_SIZE: |
13a5695b7 Patch by Jian Zha... |
3633 3634 |
These two #defines specify the offset and size of the environment |
fdd813def README: Add new N... |
3635 3636 |
area within the first NAND device. CONFIG_ENV_OFFSET must be aligned to an erase block boundary. |
5779d8d98 * Patch by Nicola... |
3637 |
|
fdd813def README: Add new N... |
3638 |
- CONFIG_ENV_OFFSET_REDUND (optional): |
e443c944c Support for redun... |
3639 |
|
0e8d15866 rename CFG_ENV ma... |
3640 |
This setting describes a second storage area of CONFIG_ENV_SIZE |
fdd813def README: Add new N... |
3641 3642 |
size used to hold a redundant copy of the environment data, so that there is a valid backup copy in case there is a power failure |
c0f40859f README: white-spa... |
3643 |
during a "saveenv" operation. CONFIG_ENV_OFFSET_RENDUND must be |
fdd813def README: Add new N... |
3644 3645 3646 3647 3648 3649 3650 3651 3652 3653 3654 3655 3656 3657 3658 3659 3660 |
aligned to an erase block boundary. - CONFIG_ENV_RANGE (optional): Specifies the length of the region in which the environment can be written. This should be a multiple of the NAND device's block size. Specifying a range with more erase blocks than are needed to hold CONFIG_ENV_SIZE allows bad blocks within the range to be avoided. - CONFIG_ENV_OFFSET_OOB (optional): Enables support for dynamically retrieving the offset of the environment from block zero's out-of-band data. The "nand env.oob" command can be used to record this offset. Currently, CONFIG_ENV_OFFSET_REDUND is not supported when using CONFIG_ENV_OFFSET_OOB. |
e443c944c Support for redun... |
3661 |
|
b74ab7373 nand_spl: read en... |
3662 3663 3664 3665 3666 |
- CONFIG_NAND_ENV_DST Defines address in RAM to which the nand_spl code should copy the environment. If redundant environment is used, it will be copied to CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE. |
2b74433f3 env: Add support ... |
3667 3668 3669 3670 3671 3672 3673 3674 3675 3676 3677 3678 3679 3680 |
- CONFIG_ENV_IS_IN_UBI: Define this if you have an UBI volume that you want to use for the environment. This has the benefit of wear-leveling the environment accesses, which is important on NAND. - CONFIG_ENV_UBI_PART: Define this to a string that is the mtd partition containing the UBI. - CONFIG_ENV_UBI_VOLUME: Define this to the name of the volume that you want to store the environment in. |
785881f77 env: Add redundan... |
3681 3682 3683 3684 3685 |
- CONFIG_ENV_UBI_VOLUME_REDUND: Define this to the name of another volume to store a second copy of the environment in. This will enable redundant environments in UBI. It is assumed that both volumes are in the same MTD partition. |
2b74433f3 env: Add support ... |
3686 3687 3688 3689 3690 |
- CONFIG_UBI_SILENCE_MSG - CONFIG_UBIFS_SILENCE_MSG You will probably want to define these to avoid a really noisy system when storing the env in UBI. |
06e4ae5f8 README: document ... |
3691 3692 3693 3694 3695 3696 3697 3698 3699 3700 3701 3702 3703 3704 3705 3706 3707 3708 3709 3710 |
- CONFIG_ENV_IS_IN_MMC: Define this if you have an MMC device which you want to use for the environment. - CONFIG_SYS_MMC_ENV_DEV: Specifies which MMC device the environment is stored in. - CONFIG_SYS_MMC_ENV_PART (optional): Specifies which MMC partition the environment is stored in. If not set, defaults to partition 0, the user area. Common values might be 1 (first MMC boot partition), 2 (second MMC boot partition). - CONFIG_ENV_OFFSET: - CONFIG_ENV_SIZE: These two #defines specify the offset and size of the environment area within the specified MMC device. |
5c088ee84 env_mmc: allow ne... |
3711 3712 3713 3714 3715 3716 3717 |
If offset is positive (the usual case), it is treated as relative to the start of the MMC partition. If offset is negative, it is treated as relative to the end of the MMC partition. This can be useful if your board may be fitted with different MMC devices, which have different sizes for the MMC partitions, and you always want the environment placed at the very end of the partition, to leave the maximum possible space before it, to store other data. |
06e4ae5f8 README: document ... |
3718 3719 3720 3721 3722 3723 3724 3725 3726 |
These two values are in units of bytes, but must be aligned to an MMC sector boundary. - CONFIG_ENV_OFFSET_REDUND (optional): Specifies a second storage area, of CONFIG_ENV_SIZE size, used to hold a redundant copy of the environment data. This provides a valid backup copy in case the other copy is corrupted, e.g. due to a power failure during a "saveenv" operation. |
5c088ee84 env_mmc: allow ne... |
3727 3728 |
This value may also be positive or negative; this is handled in the same way as CONFIG_ENV_OFFSET. |
06e4ae5f8 README: document ... |
3729 3730 3731 3732 3733 3734 3735 3736 |
This value is also in units of bytes, but must also be aligned to an MMC sector boundary. - CONFIG_ENV_SIZE_REDUND (optional): This value need not be set, even when CONFIG_ENV_OFFSET_REDUND is set. If this value is set, it must be set to the same value as CONFIG_ENV_SIZE. |
6d0f6bcf3 rename CFG_ macro... |
3737 |
- CONFIG_SYS_SPI_INIT_OFFSET |
c609719b8 Initial revision |
3738 3739 3740 3741 3742 3743 3744 3745 |
Defines offset to the initial SPI buffer area in DPRAM. The area is used at an early stage (ROM part) if the environment is configured to reside in the SPI EEPROM: We need a 520 byte scratch DPRAM area. It is used between the two initialization calls (spi_init_f() and spi_init_r()). A value of 0xB00 seems to be a good choice since it makes it far enough from the start of the data area as well as from the stack pointer. |
e881cb563 fix wording in RE... |
3746 |
Please note that the environment is read-only until the monitor |
c609719b8 Initial revision |
3747 |
has been relocated to RAM and a RAM copy of the environment has been |
cdb749778 Rename getenv_r()... |
3748 |
created; also, when using EEPROM you will have to use getenv_f() |
c609719b8 Initial revision |
3749 |
until then to read environment variables. |
85ec0bcc1 * Patch by Arun D... |
3750 3751 3752 3753 3754 3755 |
The environment is protected by a CRC32 checksum. Before the monitor is relocated into RAM, as a result of a bad CRC you will be working with the compiled-in default environment - *silently*!!! [This is necessary, because the first environment variable we need is the "baudrate" setting for the console - if we have a bad CRC, we don't have any device yet where we could complain.] |
c609719b8 Initial revision |
3756 3757 3758 |
Note: once the monitor has been relocated, then it will complain if the default environment is used; a new CRC is computed as soon as you |
85ec0bcc1 * Patch by Arun D... |
3759 |
use the "saveenv" command to store a valid environment. |
c609719b8 Initial revision |
3760 |
|
6d0f6bcf3 rename CFG_ macro... |
3761 |
- CONFIG_SYS_FAULT_ECHO_LINK_DOWN: |
42d1f0394 * Patches by Xian... |
3762 |
Echo the inverted Ethernet link state to the fault LED. |
fc3e2165e * Patch by Sangmo... |
3763 |
|
6d0f6bcf3 rename CFG_ macro... |
3764 |
Note: If this option is active, then CONFIG_SYS_FAULT_MII_ADDR |
fc3e2165e * Patch by Sangmo... |
3765 |
also needs to be defined. |
6d0f6bcf3 rename CFG_ macro... |
3766 |
- CONFIG_SYS_FAULT_MII_ADDR: |
42d1f0394 * Patches by Xian... |
3767 |
MII address of the PHY to check for the Ethernet link state. |
c609719b8 Initial revision |
3768 |
|
f5675aa5c Create configurat... |
3769 3770 3771 3772 3773 3774 |
- CONFIG_NS16550_MIN_FUNCTIONS: Define this if you desire to only have use of the NS16550_init and NS16550_putc functions for the serial driver located at drivers/serial/ns16550.c. This option is useful for saving space for already greatly restricted images, including but not limited to NAND_SPL configurations. |
b2b92f531 Document the CONF... |
3775 3776 3777 3778 |
- CONFIG_DISPLAY_BOARDINFO Display information about the board that U-Boot is running on when U-Boot starts up. The board function checkboard() is called to do this. |
e2e3e2b1b arm: Add CONFIG_D... |
3779 3780 3781 3782 |
- CONFIG_DISPLAY_BOARDINFO_LATE Similar to the previous option, but display this information later, once stdio is running and output goes to the LCD, if present. |
c609719b8 Initial revision |
3783 |
Low Level (hardware related) configuration options: |
dc7c9a1a5 * Patch by Rick B... |
3784 |
--------------------------------------------------- |
c609719b8 Initial revision |
3785 |
|
6d0f6bcf3 rename CFG_ macro... |
3786 |
- CONFIG_SYS_CACHELINE_SIZE: |
c609719b8 Initial revision |
3787 |
Cache Line Size of the CPU. |
6d0f6bcf3 rename CFG_ macro... |
3788 |
- CONFIG_SYS_DEFAULT_IMMR: |
c609719b8 Initial revision |
3789 |
Default address of the IMMR after system reset. |
2535d6027 * Patch by Martin... |
3790 |
|
42d1f0394 * Patches by Xian... |
3791 3792 3793 |
Needed on some 8260 systems (MPC8260ADS, PQ2FADS-ZU, and RPXsuper) to be able to adjust the position of the IMMR register after a reset. |
c609719b8 Initial revision |
3794 |
|
e46fedfeb powerpc/85xx: int... |
3795 3796 3797 3798 3799 3800 3801 3802 3803 3804 3805 3806 3807 3808 |
- CONFIG_SYS_CCSRBAR_DEFAULT: Default (power-on reset) physical address of CCSR on Freescale PowerPC SOCs. - CONFIG_SYS_CCSRBAR: Virtual address of CCSR. On a 32-bit build, this is typically the same value as CONFIG_SYS_CCSRBAR_DEFAULT. CONFIG_SYS_DEFAULT_IMMR must also be set to this value, for cross-platform code that uses that macro instead. - CONFIG_SYS_CCSRBAR_PHYS: Physical address of CCSR. CCSR can be relocated to a new physical address, if desired. In this case, this macro should |
c0f40859f README: white-spa... |
3809 |
be set to that address. Otherwise, it should be set to the |
e46fedfeb powerpc/85xx: int... |
3810 3811 3812 3813 3814 3815 3816 3817 |
same value as CONFIG_SYS_CCSRBAR_DEFAULT. For example, CCSR is typically relocated on 36-bit builds. It is recommended that this macro be defined via the _HIGH and _LOW macros: #define CONFIG_SYS_CCSRBAR_PHYS ((CONFIG_SYS_CCSRBAR_PHYS_HIGH * 1ull) << 32 | CONFIG_SYS_CCSRBAR_PHYS_LOW) - CONFIG_SYS_CCSRBAR_PHYS_HIGH: |
4cf2609b0 README: fix docum... |
3818 3819 |
Bits 33-36 of CONFIG_SYS_CCSRBAR_PHYS. This value is typically either 0 (32-bit build) or 0xF (36-bit build). This macro is |
e46fedfeb powerpc/85xx: int... |
3820 3821 3822 3823 3824 3825 3826 3827 3828 3829 3830 |
used in assembly code, so it must not contain typecasts or integer size suffixes (e.g. "ULL"). - CONFIG_SYS_CCSRBAR_PHYS_LOW: Lower 32-bits of CONFIG_SYS_CCSRBAR_PHYS. This macro is used in assembly code, so it must not contain typecasts or integer size suffixes (e.g. "ULL"). - CONFIG_SYS_CCSR_DO_NOT_RELOCATE: If this macro is defined, then CONFIG_SYS_CCSRBAR_PHYS will be forced to a value that ensures that CCSR is not relocated. |
7f6c2cbc2 * Vince Husovsky,... |
3831 |
- Floppy Disk Support: |
6d0f6bcf3 rename CFG_ macro... |
3832 |
CONFIG_SYS_FDC_DRIVE_NUMBER |
7f6c2cbc2 * Vince Husovsky,... |
3833 3834 |
the default drive number (default value 0) |
6d0f6bcf3 rename CFG_ macro... |
3835 |
CONFIG_SYS_ISA_IO_STRIDE |
7f6c2cbc2 * Vince Husovsky,... |
3836 |
|
11ccc33fa Many spelling fix... |
3837 |
defines the spacing between FDC chipset registers |
7f6c2cbc2 * Vince Husovsky,... |
3838 |
(default value 1) |
6d0f6bcf3 rename CFG_ macro... |
3839 |
CONFIG_SYS_ISA_IO_OFFSET |
7f6c2cbc2 * Vince Husovsky,... |
3840 |
|
43d9616cf * Patch by Robert... |
3841 3842 |
defines the offset of register from address. It depends on which part of the data bus is connected to |
11ccc33fa Many spelling fix... |
3843 |
the FDC chipset. (default value 0) |
7f6c2cbc2 * Vince Husovsky,... |
3844 |
|
6d0f6bcf3 rename CFG_ macro... |
3845 3846 |
If CONFIG_SYS_ISA_IO_STRIDE CONFIG_SYS_ISA_IO_OFFSET and CONFIG_SYS_FDC_DRIVE_NUMBER are undefined, they take their |
43d9616cf * Patch by Robert... |
3847 |
default value. |
7f6c2cbc2 * Vince Husovsky,... |
3848 |
|
6d0f6bcf3 rename CFG_ macro... |
3849 |
if CONFIG_SYS_FDC_HW_INIT is defined, then the function |
43d9616cf * Patch by Robert... |
3850 3851 3852 3853 |
fdc_hw_init() is called at the beginning of the FDC setup. fdc_hw_init() must be provided by the board source code. It is used to make hardware dependant initializations. |
7f6c2cbc2 * Vince Husovsky,... |
3854 |
|
0abddf82d cmd_ide: enhance ... |
3855 3856 3857 3858 3859 3860 3861 |
- CONFIG_IDE_AHB: Most IDE controllers were designed to be connected with PCI interface. Only few of them were designed for AHB interface. When software is doing ATA command and data transfer to IDE devices through IDE-AHB controller, some additional registers accessing to these kind of IDE-AHB controller is requierd. |
6d0f6bcf3 rename CFG_ macro... |
3862 |
- CONFIG_SYS_IMMR: Physical address of the Internal Memory. |
efe2a4d5c Code cleanup. |
3863 |
DO NOT CHANGE unless you know exactly what you're |
25d6712a8 * Clean up CMC PU... |
3864 |
doing! (11-4) [MPC8xx/82xx systems only] |
c609719b8 Initial revision |
3865 |
|
6d0f6bcf3 rename CFG_ macro... |
3866 |
- CONFIG_SYS_INIT_RAM_ADDR: |
c609719b8 Initial revision |
3867 |
|
7152b1d0b * Add support for... |
3868 |
Start address of memory area that can be used for |
c609719b8 Initial revision |
3869 3870 3871 3872 3873 3874 3875 3876 3877 3878 3879 |
initial data and stack; please note that this must be writable memory that is working WITHOUT special initialization, i. e. you CANNOT use normal RAM which will become available only after programming the memory controller and running certain initialization sequences. U-Boot uses the following memory types: - MPC8xx and MPC8260: IMMR (internal memory of the CPU) - MPC824X: data cache - PPC4xx: data cache |
6d0f6bcf3 rename CFG_ macro... |
3880 |
- CONFIG_SYS_GBL_DATA_OFFSET: |
c609719b8 Initial revision |
3881 3882 |
Offset of the initial data structure in the memory |
6d0f6bcf3 rename CFG_ macro... |
3883 3884 |
area defined by CONFIG_SYS_INIT_RAM_ADDR. Usually CONFIG_SYS_GBL_DATA_OFFSET is chosen such that the initial |
c609719b8 Initial revision |
3885 |
data is located at the end of the available space |
553f09823 Rename CONFIG_SYS... |
3886 |
(sometimes written as (CONFIG_SYS_INIT_RAM_SIZE - |
6d0f6bcf3 rename CFG_ macro... |
3887 3888 3889 |
CONFIG_SYS_INIT_DATA_SIZE), and the initial stack is just below that area (growing from (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET) downward. |
c609719b8 Initial revision |
3890 3891 3892 3893 |
Note: On the MPC824X (or other systems that use the data cache for initial memory) the address chosen for |
6d0f6bcf3 rename CFG_ macro... |
3894 |
CONFIG_SYS_INIT_RAM_ADDR is basically arbitrary - it must |
c609719b8 Initial revision |
3895 3896 |
point to an otherwise UNUSED address space between the top of RAM and the start of the PCI space. |
6d0f6bcf3 rename CFG_ macro... |
3897 |
- CONFIG_SYS_SIUMCR: SIU Module Configuration (11-6) |
c609719b8 Initial revision |
3898 |
|
6d0f6bcf3 rename CFG_ macro... |
3899 |
- CONFIG_SYS_SYPCR: System Protection Control (11-9) |
c609719b8 Initial revision |
3900 |
|
6d0f6bcf3 rename CFG_ macro... |
3901 |
- CONFIG_SYS_TBSCR: Time Base Status and Control (11-26) |
c609719b8 Initial revision |
3902 |
|
6d0f6bcf3 rename CFG_ macro... |
3903 |
- CONFIG_SYS_PISCR: Periodic Interrupt Status and Control (11-31) |
c609719b8 Initial revision |
3904 |
|
6d0f6bcf3 rename CFG_ macro... |
3905 |
- CONFIG_SYS_PLPRCR: PLL, Low-Power, and Reset Control Register (15-30) |
c609719b8 Initial revision |
3906 |
|
6d0f6bcf3 rename CFG_ macro... |
3907 |
- CONFIG_SYS_SCCR: System Clock and reset Control Register (15-27) |
c609719b8 Initial revision |
3908 |
|
6d0f6bcf3 rename CFG_ macro... |
3909 |
- CONFIG_SYS_OR_TIMING_SDRAM: |
c609719b8 Initial revision |
3910 |
SDRAM timing |
6d0f6bcf3 rename CFG_ macro... |
3911 |
- CONFIG_SYS_MAMR_PTA: |
c609719b8 Initial revision |
3912 |
periodic timer for refresh |
6d0f6bcf3 rename CFG_ macro... |
3913 |
- CONFIG_SYS_DER: Debug Event Register (37-47) |
c609719b8 Initial revision |
3914 |
|
6d0f6bcf3 rename CFG_ macro... |
3915 3916 3917 3918 |
- FLASH_BASE0_PRELIM, FLASH_BASE1_PRELIM, CONFIG_SYS_REMAP_OR_AM, CONFIG_SYS_PRELIM_OR_AM, CONFIG_SYS_OR_TIMING_FLASH, CONFIG_SYS_OR0_REMAP, CONFIG_SYS_OR0_PRELIM, CONFIG_SYS_BR0_PRELIM, CONFIG_SYS_OR1_REMAP, CONFIG_SYS_OR1_PRELIM, CONFIG_SYS_BR1_PRELIM: |
c609719b8 Initial revision |
3919 3920 3921 |
Memory Controller Definitions: BR0/1 and OR0/1 (FLASH) - SDRAM_BASE2_PRELIM, SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE, |
6d0f6bcf3 rename CFG_ macro... |
3922 3923 |
CONFIG_SYS_OR_TIMING_SDRAM, CONFIG_SYS_OR2_PRELIM, CONFIG_SYS_BR2_PRELIM, CONFIG_SYS_OR3_PRELIM, CONFIG_SYS_BR3_PRELIM: |
c609719b8 Initial revision |
3924 |
Memory Controller Definitions: BR2/3 and OR2/3 (SDRAM) |
6d0f6bcf3 rename CFG_ macro... |
3925 3926 |
- CONFIG_SYS_MAMR_PTA, CONFIG_SYS_MPTPR_2BK_4K, CONFIG_SYS_MPTPR_1BK_4K, CONFIG_SYS_MPTPR_2BK_8K, CONFIG_SYS_MPTPR_1BK_8K, CONFIG_SYS_MAMR_8COL, CONFIG_SYS_MAMR_9COL: |
c609719b8 Initial revision |
3927 3928 |
Machine Mode Register and Memory Periodic Timer Prescaler definitions (SDRAM timing) |
6d0f6bcf3 rename CFG_ macro... |
3929 |
- CONFIG_SYS_I2C_UCODE_PATCH, CONFIG_SYS_I2C_DPMEM_OFFSET [0x1FC0]: |
c609719b8 Initial revision |
3930 3931 |
enable I2C microcode relocation patch (MPC8xx); define relocation offset in DPRAM [DSP2] |
6d0f6bcf3 rename CFG_ macro... |
3932 |
- CONFIG_SYS_SMC_UCODE_PATCH, CONFIG_SYS_SMC_DPMEM_OFFSET [0x1FC0]: |
b423d055c Enable SMC microc... |
3933 3934 |
enable SMC microcode relocation patch (MPC8xx); define relocation offset in DPRAM [SMC1] |
6d0f6bcf3 rename CFG_ macro... |
3935 |
- CONFIG_SYS_SPI_UCODE_PATCH, CONFIG_SYS_SPI_DPMEM_OFFSET [0x1FC0]: |
c609719b8 Initial revision |
3936 3937 |
enable SPI microcode relocation patch (MPC8xx); define relocation offset in DPRAM [SCC4] |
6d0f6bcf3 rename CFG_ macro... |
3938 |
- CONFIG_SYS_USE_OSCCLK: |
c609719b8 Initial revision |
3939 3940 3941 |
Use OSCM clock mode on MBX8xx board. Be careful, wrong setting might damage your board. Read doc/README.MBX before setting this variable! |
6d0f6bcf3 rename CFG_ macro... |
3942 |
- CONFIG_SYS_CPM_POST_WORD_ADDR: (MPC8xx, MPC8260 only) |
43d9616cf * Patch by Robert... |
3943 3944 3945 3946 |
Offset of the bootmode word in DPRAM used by post (Power On Self Tests). This definition overrides #define'd default value in commproc.h resp. cpm_8260.h. |
ea909b760 * Added support f... |
3947 |
|
6d0f6bcf3 rename CFG_ macro... |
3948 3949 3950 3951 3952 3953 3954 3955 |
- CONFIG_SYS_PCI_SLV_MEM_LOCAL, CONFIG_SYS_PCI_SLV_MEM_BUS, CONFIG_SYS_PICMR0_MASK_ATTRIB, CONFIG_SYS_PCI_MSTR0_LOCAL, CONFIG_SYS_PCIMSK0_MASK, CONFIG_SYS_PCI_MSTR1_LOCAL, CONFIG_SYS_PCIMSK1_MASK, CONFIG_SYS_PCI_MSTR_MEM_LOCAL, CONFIG_SYS_PCI_MSTR_MEM_BUS, CONFIG_SYS_CPU_PCI_MEM_START, CONFIG_SYS_PCI_MSTR_MEM_SIZE, CONFIG_SYS_POCMR0_MASK_ATTRIB, CONFIG_SYS_PCI_MSTR_MEMIO_LOCAL, CONFIG_SYS_PCI_MSTR_MEMIO_BUS, CPU_PCI_MEMIO_START, CONFIG_SYS_PCI_MSTR_MEMIO_SIZE, CONFIG_SYS_POCMR1_MASK_ATTRIB, CONFIG_SYS_PCI_MSTR_IO_LOCAL, CONFIG_SYS_PCI_MSTR_IO_BUS, CONFIG_SYS_CPU_PCI_IO_START, CONFIG_SYS_PCI_MSTR_IO_SIZE, CONFIG_SYS_POCMR2_MASK_ATTRIB: (MPC826x only) |
a47a12bec Move arch/ppc to ... |
3956 |
Overrides the default PCI memory map in arch/powerpc/cpu/mpc8260/pci.c if set. |
5d232d0e7 * Patch by Dave E... |
3957 |
|
9cacf4fc4 ppc4xx: Add READM... |
3958 3959 3960 |
- CONFIG_PCI_DISABLE_PCIE: Disable PCI-Express on systems where it is supported but not required. |
69fd2d3b0 pci: add CONFIG_P... |
3961 3962 3963 3964 3965 3966 |
- CONFIG_PCI_ENUM_ONLY Only scan through and get the devices on the busses. Don't do any setup work, presumably because someone or something has already done it, and we don't need to do it a second time. Useful for platforms that are pre-booted by coreboot or similar. |
842033e69 pci: introduce CO... |
3967 3968 |
- CONFIG_PCI_INDIRECT_BRIDGE: Enable support for indirect PCI bridges. |
a09b9b68d powerpc/8xxx: Ref... |
3969 3970 3971 3972 3973 3974 3975 3976 |
- CONFIG_SYS_SRIO: Chip has SRIO or not - CONFIG_SRIO1: Board has SRIO 1 port available - CONFIG_SRIO2: Board has SRIO 2 port available |
c8b281524 powerpc/boot: Cha... |
3977 3978 |
- CONFIG_SRIO_PCIE_BOOT_MASTER Board can support master function for Boot from SRIO and PCIE |
a09b9b68d powerpc/8xxx: Ref... |
3979 3980 3981 3982 3983 3984 3985 3986 |
- CONFIG_SYS_SRIOn_MEM_VIRT: Virtual Address of SRIO port 'n' memory region - CONFIG_SYS_SRIOn_MEM_PHYS: Physical Address of SRIO port 'n' memory region - CONFIG_SYS_SRIOn_MEM_SIZE: Size of SRIO port 'n' memory region |
66bd1846e mtd: nand: Introd... |
3987 3988 3989 3990 |
- CONFIG_SYS_NAND_BUSWIDTH_16BIT Defined to tell the NAND controller that the NAND chip is using a 16 bit bus. Not all NAND drivers use this symbol. |
a430e9164 mtd: nand: mxc_na... |
3991 |
Example of drivers that use it: |
66bd1846e mtd: nand: Introd... |
3992 |
- drivers/mtd/nand/ndfc.c |
a430e9164 mtd: nand: mxc_na... |
3993 |
- drivers/mtd/nand/mxc_nand.c |
eced4626e NAND: Add 16bit N... |
3994 3995 3996 3997 |
- CONFIG_SYS_NDFC_EBC0_CFG Sets the EBC0_CFG register for the NDFC. If not defined a default value will be used. |
bb99ad6d8 Add support for m... |
3998 |
- CONFIG_SPD_EEPROM |
218ca724c README: update do... |
3999 4000 |
Get DDR timing information from an I2C EEPROM. Common with pluggable memory modules such as SODIMMs |
bb99ad6d8 Add support for m... |
4001 4002 |
SPD_EEPROM_ADDRESS I2C address of the SPD EEPROM |
6d0f6bcf3 rename CFG_ macro... |
4003 |
- CONFIG_SYS_SPD_BUS_NUM |
218ca724c README: update do... |
4004 4005 4006 |
If SPD EEPROM is on an I2C bus other than the first one, specify here. Note that the value must resolve to something your driver can deal with. |
bb99ad6d8 Add support for m... |
4007 |
|
1b3e3c4f2 powerpc/mpc8xxx: ... |
4008 4009 4010 4011 4012 |
- CONFIG_SYS_DDR_RAW_TIMING Get DDR timing information from other than SPD. Common with soldered DDR chips onboard without SPD. DDR raw timing parameters are extracted from datasheet and hard-coded into header files or board specific files. |
6f5e1dc53 powerpc/8xxx: Add... |
4013 4014 |
- CONFIG_FSL_DDR_INTERACTIVE Enable interactive DDR debugging. See doc/README.fsl-ddr. |
6d0f6bcf3 rename CFG_ macro... |
4015 |
- CONFIG_SYS_83XX_DDR_USES_CS0 |
218ca724c README: update do... |
4016 4017 |
Only for 83xx systems. If specified, then DDR should be configured using CS0 and CS1 instead of CS2 and CS3. |
2ad6b513b mpc83xx: Add supp... |
4018 |
|
c26e454df Patches by Pantel... |
4019 4020 4021 4022 4023 |
- CONFIG_ETHER_ON_FEC[12] Define to enable FEC[12] on a 8xx series processor. - CONFIG_FEC[12]_PHY Define to the hardcoded PHY address which corresponds |
6e5923851 * Cleanup, minor ... |
4024 4025 |
to the given FEC; i. e. #define CONFIG_FEC1_PHY 4 |
c26e454df Patches by Pantel... |
4026 4027 4028 4029 4030 4031 4032 4033 4034 4035 4036 4037 |
means that the PHY with address 4 is connected to FEC1 When set to -1, means to probe for first available. - CONFIG_FEC[12]_PHY_NORXERR The PHY does not have a RXERR line (RMII only). (so program the FEC to ignore it). - CONFIG_RMII Enable RMII mode for all FECs. Note that this is a global option, we can't have one FEC in standard MII mode and another in RMII mode. |
5cf91d6bd * Modify KUP4X bo... |
4038 4039 4040 4041 4042 4043 4044 4045 4046 |
- CONFIG_CRC32_VERIFY Add a verify option to the crc32 command. The syntax is: => crc32 -v <address> <count> <crc32> Where address/count indicate a memory area and crc32 is the correct crc32 which the area should have. |
56523f128 * Patch by Martin... |
4047 4048 |
- CONFIG_LOOPW Add the "loopw" memory command. This only takes effect if |
602ad3b33 README: Rewrite c... |
4049 |
the memory commands are activated globally (CONFIG_CMD_MEM). |
56523f128 * Patch by Martin... |
4050 |
|
7b4666414 CONFIG_MX_CYCLIC ... |
4051 4052 4053 4054 |
- CONFIG_MX_CYCLIC Add the "mdc" and "mwc" memory commands. These are cyclic "md/mw" commands. Examples: |
efe2a4d5c Code cleanup. |
4055 |
=> mdc.b 10 4 500 |
7b4666414 CONFIG_MX_CYCLIC ... |
4056 |
This command will print 4 bytes (10,11,12,13) each 500 ms. |
efe2a4d5c Code cleanup. |
4057 |
=> mwc.l 100 12345678 10 |
7b4666414 CONFIG_MX_CYCLIC ... |
4058 |
This command will write 12345678 to address 100 all 10 ms. |
efe2a4d5c Code cleanup. |
4059 |
This only takes effect if the memory commands are activated |
602ad3b33 README: Rewrite c... |
4060 |
globally (CONFIG_CMD_MEM). |
7b4666414 CONFIG_MX_CYCLIC ... |
4061 |
|
8aa1a2d11 Patch by Steven S... |
4062 |
- CONFIG_SKIP_LOWLEVEL_INIT |
afc1ce828 doc/README: docum... |
4063 |
[ARM, NDS32, MIPS only] If this variable is defined, then certain |
844f07d8a Coding Style (whi... |
4064 4065 4066 4067 4068 4069 4070 4071 |
low level initializations (like setting up the memory controller) are omitted and/or U-Boot does not relocate itself into RAM. Normally this variable MUST NOT be defined. The only exception is when U-Boot is loaded (to RAM) by some other boot loader or by a debugger which performs these initializations itself. |
8aa1a2d11 Patch by Steven S... |
4072 |
|
401bb30b6 replace CONFIG_PR... |
4073 |
- CONFIG_SPL_BUILD |
df81238b3 ARM1136: Introduc... |
4074 4075 4076 |
Modifies the behaviour of start.S when compiling a loader that is executed before the actual U-Boot. E.g. when compiling a NAND SPL. |
400558b56 Prepare for SoC r... |
4077 |
|
3aa29de0b TPL : introduce t... |
4078 4079 4080 4081 |
- CONFIG_TPL_BUILD Modifies the behaviour of start.S when compiling a loader that is executed after the SPL and before the actual U-Boot. It is loaded by the SPL. |
5df572f01 powerpc/mpc85xx: ... |
4082 4083 4084 4085 |
- CONFIG_SYS_MPC85XX_NO_RESETVEC Only for 85xx systems. If this variable is specified, the section .resetvec is not kept and the section .bootpg is placed in the previous 4k of the .text section. |
4213fc291 sandbox: Add un/m... |
4086 4087 4088 4089 4090 4091 4092 4093 |
- CONFIG_ARCH_MAP_SYSMEM Generally U-Boot (and in particular the md command) uses effective address. It is therefore not necessary to regard U-Boot address as virtual addresses that need to be translated to physical addresses. However, sandbox requires this, since it maintains its own little RAM buffer which contains all addressable memory. This option causes some memory accesses to be mapped through map_sysmem() / unmap_sysmem(). |
d8834a132 arm: Use optimize... |
4094 4095 4096 4097 4098 |
- CONFIG_USE_ARCH_MEMCPY CONFIG_USE_ARCH_MEMSET If these options are used a optimized version of memcpy/memset will be used if available. These functions may be faster under some conditions but may increase the binary size. |
588a13f74 x86: Rename CONFI... |
4099 4100 4101 |
- CONFIG_X86_RESET_VECTOR If defined, the x86 reset vector code is included. This is not needed when U-Boot is running from Coreboot. |
b16f521a5 x86: Allow exclud... |
4102 |
|
fc33705e6 Allow AM335x MPU ... |
4103 4104 4105 4106 |
- CONFIG_SYS_MPUCLK Defines the MPU clock speed (in MHz). NOTE : currently only supported on AM335x platforms. |
5b5ece9ef x86: Allow compil... |
4107 |
|
16678eb40 arm, am33x: make ... |
4108 4109 |
- CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC: Enables the RTC32K OSC on AM33xx based plattforms |
f2717b47e powerpc/85xx: cle... |
4110 4111 4112 4113 4114 4115 4116 4117 4118 4119 4120 4121 4122 4123 4124 4125 4126 4127 4128 4129 4130 4131 4132 4133 4134 4135 4136 4137 4138 4139 4140 4141 4142 4143 4144 4145 |
Freescale QE/FMAN Firmware Support: ----------------------------------- The Freescale QUICCEngine (QE) and Frame Manager (FMAN) both support the loading of "firmware", which is encoded in the QE firmware binary format. This firmware often needs to be loaded during U-Boot booting, so macros are used to identify the storage device (NOR flash, SPI, etc) and the address within that device. - CONFIG_SYS_QE_FMAN_FW_ADDR The address in the storage device where the firmware is located. The meaning of this address depends on which CONFIG_SYS_QE_FW_IN_xxx macro is also specified. - CONFIG_SYS_QE_FMAN_FW_LENGTH The maximum possible size of the firmware. The firmware binary format has a field that specifies the actual size of the firmware, but it might not be possible to read any part of the firmware unless some local storage is allocated to hold the entire firmware first. - CONFIG_SYS_QE_FMAN_FW_IN_NOR Specifies that QE/FMAN firmware is located in NOR flash, mapped as normal addressable memory via the LBC. CONFIG_SYS_FMAN_FW_ADDR is the virtual address in NOR flash. - CONFIG_SYS_QE_FMAN_FW_IN_NAND Specifies that QE/FMAN firmware is located in NAND flash. CONFIG_SYS_FMAN_FW_ADDR is the offset within NAND flash. - CONFIG_SYS_QE_FMAN_FW_IN_MMC Specifies that QE/FMAN firmware is located on the primary SD/MMC device. CONFIG_SYS_FMAN_FW_ADDR is the byte offset on that device. - CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH Specifies that QE/FMAN firmware is located on the primary SPI device. CONFIG_SYS_FMAN_FW_ADDR is the byte offset on that device. |
292dc6c50 powerpc/corenet_d... |
4146 4147 4148 |
- CONFIG_SYS_QE_FMAN_FW_IN_REMOTE Specifies that QE/FMAN firmware is located in the remote (master) memory space. CONFIG_SYS_FMAN_FW_ADDR is a virtual address which |
fc54c7fa0 powerpc/corenet_d... |
4149 4150 4151 |
can be mapped from slave TLB->slave LAW->slave SRIO or PCIE outbound window->master inbound window->master LAW->the ucode address in master's memory space. |
f2717b47e powerpc/85xx: cle... |
4152 |
|
c609719b8 Initial revision |
4153 4154 |
Building the Software: ====================== |
218ca724c README: update do... |
4155 4156 4157 4158 4159 4160 |
Building U-Boot has been tested in several native build environments and in many different cross environments. Of course we cannot support all possibly existing versions of cross development tools in all (potentially obsolete) versions. In case of tool chain problems we recommend to use the ELDK (see http://www.denx.de/wiki/DULG/ELDK) which is extensively used to build and test U-Boot. |
c609719b8 Initial revision |
4161 |
|
218ca724c README: update do... |
4162 4163 4164 4165 4166 |
If you are not using a native environment, it is assumed that you have GNU cross compiling tools available in your path. In this case, you must set the environment variable CROSS_COMPILE in your shell. Note that no changes to the Makefile or any other source files are necessary. For example using the ELDK on a 4xx CPU, please enter: |
c609719b8 Initial revision |
4167 |
|
218ca724c README: update do... |
4168 4169 |
$ CROSS_COMPILE=ppc_4xx- $ export CROSS_COMPILE |
c609719b8 Initial revision |
4170 |
|
2f8d396b9 Add support for b... |
4171 4172 4173 4174 4175 4176 4177 4178 4179 |
Note: If you wish to generate Windows versions of the utilities in the tools directory you can use the MinGW toolchain (http://www.mingw.org). Set your HOST tools to the MinGW toolchain and execute 'make tools'. For example: $ make HOSTCC=i586-mingw32msvc-gcc HOSTSTRIP=i586-mingw32msvc-strip tools Binaries such as tools/mkimage.exe will be created which can be executed on computers running Windows. |
218ca724c README: update do... |
4180 4181 |
U-Boot is intended to be simple to build. After installing the sources you must configure U-Boot for one specific board type. This |
c609719b8 Initial revision |
4182 4183 4184 |
is done by typing: make NAME_config |
218ca724c README: update do... |
4185 |
where "NAME_config" is the name of one of the existing configu- |
4d675ae6e README: supported... |
4186 |
rations; see boards.cfg for supported names. |
db01a2ea9 * Patch by Stephe... |
4187 |
|
2729af9d5 * Fix minor NAND ... |
4188 4189 4190 4191 |
Note: for some board special configuration names may exist; check if additional information is available from the board vendor; for instance, the TQM823L systems are available without (standard) or with LCD support. You can select such additional "features" |
11ccc33fa Many spelling fix... |
4192 |
when choosing the configuration, i. e. |
2729af9d5 * Fix minor NAND ... |
4193 4194 4195 4196 4197 4198 4199 4200 4201 4202 4203 4204 4205 4206 4207 4208 |
make TQM823L_config - will configure for a plain TQM823L, i. e. no LCD support make TQM823L_LCD_config - will configure for a TQM823L with U-Boot console on LCD etc. Finally, type "make all", and you should get some working U-Boot images ready for download to / installation on your system: - "u-boot.bin" is a raw binary image - "u-boot" is an image in ELF binary format - "u-boot.srec" is in Motorola S-Record format |
baf312495 Add documentation... |
4209 4210 4211 4212 4213 4214 4215 4216 4217 4218 4219 4220 4221 4222 4223 4224 4225 4226 4227 |
By default the build is performed locally and the objects are saved in the source directory. One of the two methods can be used to change this behavior and build U-Boot to some external directory: 1. Add O= to the make command line invocations: make O=/tmp/build distclean make O=/tmp/build NAME_config make O=/tmp/build all 2. Set environment variable BUILD_DIR to point to the desired location: export BUILD_DIR=/tmp/build make distclean make NAME_config make all Note that the command line "O=" setting overrides the BUILD_DIR environment variable. |
2729af9d5 * Fix minor NAND ... |
4228 4229 4230 4231 4232 4233 4234 4235 4236 4237 4238 |
Please be aware that the Makefiles assume you are using GNU make, so for instance on NetBSD you might need to use "gmake" instead of native "make". If the system board that you have is not listed, then you will need to port U-Boot to your hardware platform. To do this, follow these steps: 1. Add a new configuration option for your board to the toplevel |
4d675ae6e README: supported... |
4239 4240 |
"boards.cfg" file, using the existing entries as examples. Follow the instructions there to keep the boards in order. |
2729af9d5 * Fix minor NAND ... |
4241 4242 4243 4244 4245 4246 4247 4248 4249 4250 4251 4252 4253 4254 4255 4256 |
2. Create a new directory to hold your board specific code. Add any files you need. In your board directory, you will need at least the "Makefile", a "<board>.c", "flash.c" and "u-boot.lds". 3. Create a new configuration file "include/configs/<board>.h" for your board 3. If you're porting U-Boot to a new CPU, then also create a new directory to hold your CPU specific code. Add any files you need. 4. Run "make <board>_config" with your new name. 5. Type "make", and you should get a working "u-boot.srec" file to be installed on your target system. 6. Debug and solve any problems that might arise. [Of course, this last step is much harder than it sounds.] Testing of U-Boot Modifications, Ports to New Hardware, etc.: ============================================================== |
218ca724c README: update do... |
4257 4258 |
If you have modified U-Boot sources (for instance added a new board or support for new devices, a new CPU, etc.) you are expected to |
2729af9d5 * Fix minor NAND ... |
4259 4260 |
provide feedback to the other developers. The feedback normally takes the form of a "patch", i. e. a context diff against a certain (latest |
218ca724c README: update do... |
4261 |
official or latest in the git repository) version of U-Boot sources. |
2729af9d5 * Fix minor NAND ... |
4262 |
|
218ca724c README: update do... |
4263 4264 |
But before you submit such a patch, please verify that your modifi- cation did not break existing code. At least make sure that *ALL* of |
2729af9d5 * Fix minor NAND ... |
4265 4266 |
the supported boards compile WITHOUT ANY compiler warnings. To do so, just run the "MAKEALL" script, which will configure and build U-Boot |
218ca724c README: update do... |
4267 4268 4269 4270 |
for ALL supported system. Be warned, this will take a while. You can select which (cross) compiler to use by passing a `CROSS_COMPILE' environment variable to the script, i. e. to use the ELDK cross tools you can type |
2729af9d5 * Fix minor NAND ... |
4271 4272 4273 4274 4275 4276 |
CROSS_COMPILE=ppc_8xx- MAKEALL or to build on a native PowerPC system you can type CROSS_COMPILE=' ' MAKEALL |
218ca724c README: update do... |
4277 4278 4279 4280 4281 4282 4283 |
When using the MAKEALL script, the default behaviour is to build U-Boot in the source directory. This location can be changed by setting the BUILD_DIR environment variable. Also, for each target built, the MAKEALL script saves two log files (<target>.ERR and <target>.MAKEALL) in the <source dir>/LOG directory. This default location can be changed by setting the MAKEALL_LOGDIR environment variable. For example: |
baf312495 Add documentation... |
4284 4285 4286 4287 |
export BUILD_DIR=/tmp/build export MAKEALL_LOGDIR=/tmp/log CROSS_COMPILE=ppc_8xx- MAKEALL |
218ca724c README: update do... |
4288 4289 4290 |
With the above settings build objects are saved in the /tmp/build, log files are saved in the /tmp/log and the source tree remains clean during the whole build process. |
baf312495 Add documentation... |
4291 |
|
2729af9d5 * Fix minor NAND ... |
4292 4293 4294 4295 4296 4297 4298 4299 4300 4301 |
See also "U-Boot Porting Guide" below. Monitor Commands - Overview: ============================ go - start application at address 'addr' run - run commands in an environment variable bootm - boot application image from memory bootp - boot image via network using BootP/TFTP protocol |
44f074c77 BOOT: Add "bootz"... |
4302 |
bootz - boot zImage from memory |
2729af9d5 * Fix minor NAND ... |
4303 4304 4305 |
tftpboot- boot image via network using TFTP protocol and env variables "ipaddr" and "serverip" (and eventually "gatewayip") |
1fb7cd498 net: tftpput: imp... |
4306 |
tftpput - upload a file via network using TFTP protocol |
2729af9d5 * Fix minor NAND ... |
4307 4308 4309 4310 4311 4312 4313 4314 4315 4316 4317 |
rarpboot- boot image via network using RARP/TFTP protocol diskboot- boot from IDE devicebootd - boot default, i.e., run 'bootcmd' loads - load S-Record file over serial line loadb - load binary file over serial line (kermit mode) md - memory display mm - memory modify (auto-incrementing) nm - memory modify (constant address) mw - memory write (fill) cp - memory copy cmp - memory compare crc32 - checksum calculation |
0f89c54be i2c: Update refer... |
4318 |
i2c - I2C sub-system |
2729af9d5 * Fix minor NAND ... |
4319 4320 4321 4322 4323 4324 4325 4326 |
sspi - SPI utility commands base - print or set address offset printenv- print environment variables setenv - set environment variables saveenv - save environment variables to persistent storage protect - enable or disable FLASH write protection erase - erase FLASH memory flinfo - print FLASH memory information |
10635afa5 README: Reference... |
4327 |
nand - NAND memory operations (see doc/README.nand) |
2729af9d5 * Fix minor NAND ... |
4328 4329 4330 4331 4332 |
bdinfo - print Board Info structure iminfo - print header information for application image coninfo - print console devices and informations ide - IDE sub-system loop - infinite loop on address range |
56523f128 * Patch by Martin... |
4333 |
loopw - infinite write loop on address range |
2729af9d5 * Fix minor NAND ... |
4334 4335 4336 4337 4338 4339 4340 4341 4342 4343 4344 4345 4346 4347 4348 4349 4350 4351 4352 4353 4354 4355 4356 |
mtest - simple RAM test icache - enable or disable instruction cache dcache - enable or disable data cache reset - Perform RESET of the CPU echo - echo args to console version - print monitor version help - print online help ? - alias for 'help' Monitor Commands - Detailed Description: ======================================== TODO. For now: just type "help <command>". Environment Variables: ====================== U-Boot supports user configuration using Environment Variables which can be made persistent by saving to Flash memory. |
c609719b8 Initial revision |
4357 |
|
2729af9d5 * Fix minor NAND ... |
4358 4359 4360 4361 4362 4363 |
Environment Variables are set using "setenv", printed using "printenv", and saved to Flash using "saveenv". Using "setenv" without a value can be used to delete a variable from the environment. As long as you don't save the environment you are working with an in-memory copy. In case the Flash area containing the environment is erased by accident, a default environment is provided. |
c609719b8 Initial revision |
4364 |
|
c96f86eef TFTP: allow for a... |
4365 4366 4367 |
Some configuration options can be set using Environment Variables. List of environment variables (most likely not complete): |
c609719b8 Initial revision |
4368 |
|
2729af9d5 * Fix minor NAND ... |
4369 |
baudrate - see CONFIG_BAUDRATE |
c609719b8 Initial revision |
4370 |
|
2729af9d5 * Fix minor NAND ... |
4371 |
bootdelay - see CONFIG_BOOTDELAY |
c609719b8 Initial revision |
4372 |
|
2729af9d5 * Fix minor NAND ... |
4373 |
bootcmd - see CONFIG_BOOTCOMMAND |
4a6fd34b2 * Patch by Lutz D... |
4374 |
|
2729af9d5 * Fix minor NAND ... |
4375 |
bootargs - Boot arguments when booting an RTOS image |
c609719b8 Initial revision |
4376 |
|
2729af9d5 * Fix minor NAND ... |
4377 |
bootfile - Name of the image to load with TFTP |
c609719b8 Initial revision |
4378 |
|
7d721e34a Boot-related docu... |
4379 4380 4381 4382 4383 4384 |
bootm_low - Memory range available for image processing in the bootm command can be restricted. This variable is given as a hexadecimal number and defines lowest address allowed for use by the bootm command. See also "bootm_size" environment variable. Address defined by "bootm_low" is also the base of the initial memory mapping for the Linux |
c3624e6ed Default to bootm_... |
4385 4386 |
kernel -- see the description of CONFIG_SYS_BOOTMAPSZ and bootm_mapsize. |
c0f40859f README: white-spa... |
4387 |
bootm_mapsize - Size of the initial memory mapping for the Linux kernel. |
c3624e6ed Default to bootm_... |
4388 4389 4390 4391 4392 4393 |
This variable is given as a hexadecimal number and it defines the size of the memory region starting at base address bootm_low that is accessible by the Linux kernel during early boot. If unset, CONFIG_SYS_BOOTMAPSZ is used as the default value if it is defined, and bootm_size is used otherwise. |
7d721e34a Boot-related docu... |
4394 4395 4396 4397 4398 4399 |
bootm_size - Memory range available for image processing in the bootm command can be restricted. This variable is given as a hexadecimal number and defines the size of the region allowed for use by the bootm command. See also "bootm_low" environment variable. |
4bae90904 Automatic softwar... |
4400 4401 4402 |
updatefile - Location of the software update file on a TFTP server, used by the automatic software update feature. Please refer to documentation in doc/README.update for more details. |
2729af9d5 * Fix minor NAND ... |
4403 4404 4405 4406 |
autoload - if set to "no" (any string beginning with 'n'), "bootp" will just load perform a lookup of the configuration from the BOOTP server, but not try to load any image using TFTP |
c609719b8 Initial revision |
4407 |
|
2729af9d5 * Fix minor NAND ... |
4408 4409 4410 4411 |
autostart - if set to "yes", an image loaded using the "bootp", "rarpboot", "tftpboot" or "diskboot" commands will be automatically started (by internally calling "bootm") |
38b99261c Add zero-copy ram... |
4412 |
|
2729af9d5 * Fix minor NAND ... |
4413 4414 4415 4416 4417 |
If set to "no", a standalone image passed to the "bootm" command will be copied to the load address (and eventually uncompressed), but NOT be started. This can be used to load and uncompress arbitrary data. |
c609719b8 Initial revision |
4418 |
|
a28afca57 Add uboot "fdt_hi... |
4419 4420 |
fdt_high - if set this restricts the maximum address that the flattened device tree will be copied into upon boot. |
fa34f6b25 common/image.c: a... |
4421 4422 4423 4424 4425 4426 4427 |
For example, if you have a system with 1 GB memory at physical address 0x10000000, while Linux kernel only recognizes the first 704 MB as low memory, you may need to set fdt_high as 0x3C000000 to have the device tree blob be copied to the maximum address of the 704 MB low memory, so that Linux kernel can access it during the boot procedure. |
a28afca57 Add uboot "fdt_hi... |
4428 4429 4430 4431 4432 4433 |
If this is set to the special value 0xFFFFFFFF then the fdt will not be copied at all on boot. For this to work it must reside in writable memory, have sufficient padding on the end of it for u-boot to add the information it needs into it, and the memory must be accessible by the kernel. |
eea63e05d fdt: ARM: Add fdt... |
4434 4435 4436 |
fdtcontroladdr- if set this is the address of the control flattened device tree used by U-Boot when CONFIG_OF_CONTROL is defined. |
17ea11774 Patch by Tolunay ... |
4437 4438 4439 4440 4441 |
i2cfast - (PPC405GP|PPC405EP only) if set to 'y' configures Linux I2C driver for fast mode (400kHZ). This environment variable is used in initialization code. So, for changes to be effective it must be saved and board must be reset. |
2729af9d5 * Fix minor NAND ... |
4442 4443 4444 4445 4446 4447 |
initrd_high - restrict positioning of initrd images: If this variable is not set, initrd images will be copied to the highest possible address in RAM; this is usually what you want since it allows for maximum initrd size. If for some reason you want to make sure that the initrd image is loaded below the |
6d0f6bcf3 rename CFG_ macro... |
4448 |
CONFIG_SYS_BOOTMAPSZ limit, you can set this environment |
2729af9d5 * Fix minor NAND ... |
4449 4450 4451 4452 |
variable to a value of "no" or "off" or "0". Alternatively, you can set it to a maximum upper address to use (U-Boot will still check that it does not overwrite the U-Boot stack and data). |
c609719b8 Initial revision |
4453 |
|
2729af9d5 * Fix minor NAND ... |
4454 4455 4456 4457 4458 4459 |
For instance, when you have a system with 16 MB RAM, and want to reserve 4 MB from use by Linux, you can do this by adding "mem=12M" to the value of the "bootargs" variable. However, now you must make sure that the initrd image is placed in the first 12 MB as well - this can be done with |
c609719b8 Initial revision |
4460 |
|
2729af9d5 * Fix minor NAND ... |
4461 |
setenv initrd_high 00c00000 |
c609719b8 Initial revision |
4462 |
|
2729af9d5 * Fix minor NAND ... |
4463 4464 4465 4466 4467 4468 4469 |
If you set initrd_high to 0xFFFFFFFF, this is an indication to U-Boot that all addresses are legal for the Linux kernel, including addresses in flash memory. In this case U-Boot will NOT COPY the ramdisk at all. This may be useful to reduce the boot time on your system, but requires that this feature is supported by your Linux kernel. |
c609719b8 Initial revision |
4470 |
|
2729af9d5 * Fix minor NAND ... |
4471 |
ipaddr - IP address; needed for tftpboot command |
c609719b8 Initial revision |
4472 |
|
2729af9d5 * Fix minor NAND ... |
4473 4474 |
loadaddr - Default load address for commands like "bootp", "rarpboot", "tftpboot", "loadb" or "diskboot" |
c609719b8 Initial revision |
4475 |
|
2729af9d5 * Fix minor NAND ... |
4476 |
loads_echo - see CONFIG_LOADS_ECHO |
a3d991bd0 Patches by Pantel... |
4477 |
|
2729af9d5 * Fix minor NAND ... |
4478 |
serverip - TFTP server IP address; needed for tftpboot command |
a3d991bd0 Patches by Pantel... |
4479 |
|
2729af9d5 * Fix minor NAND ... |
4480 |
bootretry - see CONFIG_BOOT_RETRY_TIME |
a3d991bd0 Patches by Pantel... |
4481 |
|
2729af9d5 * Fix minor NAND ... |
4482 |
bootdelaykey - see CONFIG_AUTOBOOT_DELAY_STR |
a3d991bd0 Patches by Pantel... |
4483 |
|
2729af9d5 * Fix minor NAND ... |
4484 |
bootstopkey - see CONFIG_AUTOBOOT_STOP_STR |
c609719b8 Initial revision |
4485 |
|
e2a53458a net: drop !NET_MU... |
4486 |
ethprime - controls which interface is used first. |
c609719b8 Initial revision |
4487 |
|
e2a53458a net: drop !NET_MU... |
4488 4489 |
ethact - controls which interface is currently active. For example you can do the following |
c609719b8 Initial revision |
4490 |
|
48690d802 net ppc: fix ethe... |
4491 4492 4493 4494 |
=> setenv ethact FEC => ping 192.168.0.1 # traffic sent on FEC => setenv ethact SCC => ping 10.0.0.1 # traffic sent on SCC |
c609719b8 Initial revision |
4495 |
|
e16925773 net: add 'ethrota... |
4496 4497 4498 |
ethrotate - When set to "no" U-Boot does not go through all available network interfaces. It just stays at the currently selected interface. |
c96f86eef TFTP: allow for a... |
4499 |
netretry - When set to "no" each network operation will |
2729af9d5 * Fix minor NAND ... |
4500 4501 4502 4503 4504 4505 |
either succeed or fail without retrying. When set to "once" the network operation will fail when all the available network interfaces are tried once without success. Useful on scripts which control the retry operation themselves. |
c609719b8 Initial revision |
4506 |
|
b4e2f89df ixp: remove the o... |
4507 |
npe_ucode - set load address for the NPE microcode |
a1cf027a0 IXP: add dynamic ... |
4508 |
|
8d51aacd8 RFC: bootm: Add s... |
4509 4510 4511 4512 4513 |
silent_linux - If set then linux will be told to boot silently, by changing the console to be empty. If "yes" it will be made silent. If "no" it will not be made silent. If unset, then it will be made silent if the U-Boot console is silent. |
28cb93758 Update for TFTP u... |
4514 |
tftpsrcport - If this is set, the value is used for TFTP's |
ecb0ccd9c Allow to force TF... |
4515 |
UDP source port. |
28cb93758 Update for TFTP u... |
4516 4517 |
tftpdstport - If this is set, the value is used for TFTP's UDP destination port instead of the Well Know Port 69. |
c96f86eef TFTP: allow for a... |
4518 4519 4520 4521 4522 4523 4524 4525 4526 4527 4528 4529 |
tftpblocksize - Block size to use for TFTP transfers; if not set, we use the TFTP server's default block size tftptimeout - Retransmission timeout for TFTP packets (in milli- seconds, minimum value is 1000 = 1 second). Defines when a packet is considered to be lost so it has to be retransmitted. The default is 5000 = 5 seconds. Lowering this value may make downloads succeed faster in networks with high packet loss rates or with unreliable TFTP servers. vlan - When set to a value < 4095 the traffic over |
11ccc33fa Many spelling fix... |
4530 |
Ethernet is encapsulated/received over 802.1q |
2729af9d5 * Fix minor NAND ... |
4531 |
VLAN tagged frames. |
c609719b8 Initial revision |
4532 |
|
dc0b7b0e6 README: document ... |
4533 4534 4535 4536 4537 4538 4539 4540 4541 4542 4543 |
The following image location variables contain the location of images used in booting. The "Image" column gives the role of the image and is not an environment variable name. The other columns are environment variable names. "File Name" gives the name of the file on a TFTP server, "RAM Address" gives the location in RAM the image will be loaded to, and "Flash Location" gives the image's address in NOR flash or offset in NAND flash. *Note* - these variables don't have to be defined for all boards, some boards currenlty use other variables for these purposes, and some boards use these variables for other purposes. |
c0f40859f README: white-spa... |
4544 4545 4546 4547 4548 4549 |
Image File Name RAM Address Flash Location ----- --------- ----------- -------------- u-boot u-boot u-boot_addr_r u-boot_addr Linux kernel bootfile kernel_addr_r kernel_addr device tree blob fdtfile fdt_addr_r fdt_addr ramdisk ramdiskfile ramdisk_addr_r ramdisk_addr |
dc0b7b0e6 README: document ... |
4550 |
|
2729af9d5 * Fix minor NAND ... |
4551 4552 4553 |
The following environment variables may be used and automatically updated by the network boot commands ("bootp" and "rarpboot"), depending the information provided by your boot server: |
c609719b8 Initial revision |
4554 |
|
2729af9d5 * Fix minor NAND ... |
4555 4556 4557 4558 4559 4560 4561 4562 4563 |
bootfile - see above dnsip - IP address of your Domain Name Server dnsip2 - IP address of your secondary Domain Name Server gatewayip - IP address of the Gateway (Router) to use hostname - Target hostname ipaddr - see above netmask - Subnet Mask rootpath - Pathname of the root filesystem on the NFS server serverip - see above |
c1551ea81 U-Boot version en... |
4564 |
|
c1551ea81 U-Boot version en... |
4565 |
|
2729af9d5 * Fix minor NAND ... |
4566 |
There are two special Environment Variables: |
c1551ea81 U-Boot version en... |
4567 |
|
2729af9d5 * Fix minor NAND ... |
4568 4569 4570 |
serial# - contains hardware identification information such as type string and/or serial number ethaddr - Ethernet address |
c609719b8 Initial revision |
4571 |
|
2729af9d5 * Fix minor NAND ... |
4572 4573 4574 |
These variables can be set only once (usually during manufacturing of the board). U-Boot refuses to delete or overwrite these variables once they have been set once. |
c609719b8 Initial revision |
4575 |
|
f07771cc2 * Fix data abort ... |
4576 |
|
2729af9d5 * Fix minor NAND ... |
4577 |
Further special Environment Variables: |
f07771cc2 * Fix data abort ... |
4578 |
|
2729af9d5 * Fix minor NAND ... |
4579 4580 4581 |
ver - Contains the U-Boot version string as printed with the "version" command. This variable is readonly (see CONFIG_VERSION_VARIABLE). |
f07771cc2 * Fix data abort ... |
4582 |
|
f07771cc2 * Fix data abort ... |
4583 |
|
2729af9d5 * Fix minor NAND ... |
4584 4585 |
Please note that changes to some configuration parameters may take only effect after the next boot (yes, that's just like Windoze :-). |
f07771cc2 * Fix data abort ... |
4586 |
|
f07771cc2 * Fix data abort ... |
4587 |
|
170ab1107 env: Add support ... |
4588 4589 4590 4591 4592 4593 4594 4595 4596 4597 4598 4599 4600 4601 4602 4603 4604 4605 4606 4607 4608 4609 4610 4611 4612 4613 4614 4615 |
Callback functions for environment variables: --------------------------------------------- For some environment variables, the behavior of u-boot needs to change when their values are changed. This functionailty allows functions to be associated with arbitrary variables. On creation, overwrite, or deletion, the callback will provide the opportunity for some side effect to happen or for the change to be rejected. The callbacks are named and associated with a function using the U_BOOT_ENV_CALLBACK macro in your board or driver code. These callbacks are associated with variables in one of two ways. The static list can be added to by defining CONFIG_ENV_CALLBACK_LIST_STATIC in the board configuration to a string that defines a list of associations. The list must be in the following format: entry = variable_name[:callback_name] list = entry[,list] If the callback name is not specified, then the callback is deleted. Spaces are also allowed anywhere in the list. Callbacks can also be associated by defining the ".callbacks" variable with the same list format above. Any association in ".callbacks" will override any association in the static list. You can define CONFIG_ENV_CALLBACK_LIST_DEFAULT to a list (string) to define the ".callbacks" envirnoment variable in the default or embedded environment. |
2729af9d5 * Fix minor NAND ... |
4616 4617 |
Command Line Parsing: ===================== |
f07771cc2 * Fix data abort ... |
4618 |
|
2729af9d5 * Fix minor NAND ... |
4619 4620 |
There are two different command line parsers available with U-Boot: the old "simple" one, and the much more powerful "hush" shell: |
c609719b8 Initial revision |
4621 |
|
2729af9d5 * Fix minor NAND ... |
4622 4623 |
Old, simple command line parser: -------------------------------- |
c609719b8 Initial revision |
4624 |
|
2729af9d5 * Fix minor NAND ... |
4625 4626 |
- supports environment variables (through setenv / saveenv commands) - several commands on one line, separated by ';' |
fe126d8b3 Change all '$(...... |
4627 |
- variable substitution using "... ${name} ..." syntax |
2729af9d5 * Fix minor NAND ... |
4628 4629 |
- special characters ('$', ';') can be escaped by prefixing with '\', for example: |
fe126d8b3 Change all '$(...... |
4630 |
setenv bootcmd bootm \${address} |
2729af9d5 * Fix minor NAND ... |
4631 4632 |
- You can also escape text by enclosing in single apostrophes, for example: setenv addip 'setenv bootargs $bootargs ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off' |
c609719b8 Initial revision |
4633 |
|
2729af9d5 * Fix minor NAND ... |
4634 4635 |
Hush shell: ----------- |
c609719b8 Initial revision |
4636 |
|
2729af9d5 * Fix minor NAND ... |
4637 4638 4639 4640 4641 4642 4643 4644 4645 4646 |
- similar to Bourne shell, with control structures like if...then...else...fi, for...do...done; while...do...done, until...do...done, ... - supports environment ("global") variables (through setenv / saveenv commands) and local shell variables (through standard shell syntax "name=value"); only environment variables can be used with "run" command General rules: -------------- |
c609719b8 Initial revision |
4647 |
|
2729af9d5 * Fix minor NAND ... |
4648 4649 4650 4651 |
(1) If a command line (or an environment variable executed by a "run" command) contains several commands separated by semicolon, and one of these commands fails, then the remaining commands will be executed anyway. |
c609719b8 Initial revision |
4652 |
|
2729af9d5 * Fix minor NAND ... |
4653 |
(2) If you execute several variables with one call to run (i. e. |
11ccc33fa Many spelling fix... |
4654 |
calling run with a list of variables as arguments), any failing |
2729af9d5 * Fix minor NAND ... |
4655 4656 |
command will cause "run" to terminate, i. e. the remaining variables are not executed. |
c609719b8 Initial revision |
4657 |
|
2729af9d5 * Fix minor NAND ... |
4658 4659 |
Note for Redundant Ethernet Interfaces: ======================================= |
c609719b8 Initial revision |
4660 |
|
11ccc33fa Many spelling fix... |
4661 |
Some boards come with redundant Ethernet interfaces; U-Boot supports |
2729af9d5 * Fix minor NAND ... |
4662 4663 |
such configurations and is capable of automatic selection of a "working" interface when needed. MAC assignment works as follows: |
c609719b8 Initial revision |
4664 |
|
2729af9d5 * Fix minor NAND ... |
4665 4666 4667 |
Network interfaces are numbered eth0, eth1, eth2, ... Corresponding MAC addresses can be stored in the environment as "ethaddr" (=>eth0), "eth1addr" (=>eth1), "eth2addr", ... |
c609719b8 Initial revision |
4668 |
|
2729af9d5 * Fix minor NAND ... |
4669 4670 4671 4672 |
If the network interface stores some valid MAC address (for instance in SROM), this is used as default address if there is NO correspon- ding setting in the environment; if the corresponding environment variable is set, this overrides the settings in the card; that means: |
c609719b8 Initial revision |
4673 |
|
2729af9d5 * Fix minor NAND ... |
4674 4675 |
o If the SROM has a valid MAC address, and there is no address in the environment, the SROM's address is used. |
c609719b8 Initial revision |
4676 |
|
2729af9d5 * Fix minor NAND ... |
4677 4678 4679 |
o If there is no valid address in the SROM, and a definition in the environment exists, then the value from the environment variable is used. |
c609719b8 Initial revision |
4680 |
|
2729af9d5 * Fix minor NAND ... |
4681 4682 |
o If both the SROM and the environment contain a MAC address, and both addresses are the same, this MAC address is used. |
c609719b8 Initial revision |
4683 |
|
2729af9d5 * Fix minor NAND ... |
4684 4685 4686 |
o If both the SROM and the environment contain a MAC address, and the addresses differ, the value from the environment is used and a warning is printed. |
c609719b8 Initial revision |
4687 |
|
2729af9d5 * Fix minor NAND ... |
4688 4689 |
o If neither SROM nor the environment contain a MAC address, an error is raised. |
c609719b8 Initial revision |
4690 |
|
ecee9324d Program net devic... |
4691 |
If Ethernet drivers implement the 'write_hwaddr' function, valid MAC addresses |
c0f40859f README: white-spa... |
4692 |
will be programmed into hardware as part of the initialization process. This |
ecee9324d Program net devic... |
4693 4694 4695 |
may be skipped by setting the appropriate 'ethmacskip' environment variable. The naming convention is as follows: "ethmacskip" (=>eth0), "eth1macskip" (=>eth1) etc. |
c609719b8 Initial revision |
4696 |
|
2729af9d5 * Fix minor NAND ... |
4697 4698 |
Image Formats: ============== |
c609719b8 Initial revision |
4699 |
|
3310c549a [new uImage] Add ... |
4700 4701 4702 4703 4704 4705 4706 4707 4708 4709 4710 4711 4712 4713 4714 4715 4716 4717 |
U-Boot is capable of booting (and performing other auxiliary operations on) images in two formats: New uImage format (FIT) ----------------------- Flexible and powerful format based on Flattened Image Tree -- FIT (similar to Flattened Device Tree). It allows the use of images with multiple components (several kernels, ramdisks, etc.), with contents protected by SHA1, MD5 or CRC32. More details are found in the doc/uImage.FIT directory. Old uImage format ----------------- Old image format is based on binary files which can be basically anything, preceded by a special header; see the definitions in include/image.h for details; basically, the header defines the following image properties: |
c609719b8 Initial revision |
4718 |
|
2729af9d5 * Fix minor NAND ... |
4719 4720 |
* Target Operating System (Provisions for OpenBSD, NetBSD, FreeBSD, 4.4BSD, Linux, SVR4, Esix, Solaris, Irix, SCO, Dell, NCR, VxWorks, |
f5ed9e390 Add support for b... |
4721 4722 4723 |
LynxOS, pSOS, QNX, RTEMS, INTEGRITY; Currently supported: Linux, NetBSD, VxWorks, QNX, RTEMS, LynxOS, INTEGRITY). |
7b64fef33 Add AVR32 archite... |
4724 |
* Target CPU Architecture (Provisions for Alpha, ARM, AVR32, Intel x86, |
afc1ce828 doc/README: docum... |
4725 4726 |
IA64, MIPS, NDS32, Nios II, PowerPC, IBM S390, SuperH, Sparc, Sparc 64 Bit; Currently supported: ARM, AVR32, Intel x86, MIPS, NDS32, Nios II, PowerPC). |
2729af9d5 * Fix minor NAND ... |
4727 4728 4729 4730 4731 |
* Compression Type (uncompressed, gzip, bzip2) * Load Address * Entry Point * Image Name * Image Timestamp |
c609719b8 Initial revision |
4732 |
|
2729af9d5 * Fix minor NAND ... |
4733 4734 4735 |
The header is marked by a special Magic Number, and both the header and the data portions of the image are secured against corruption by CRC32 checksums. |
c609719b8 Initial revision |
4736 |
|
2729af9d5 * Fix minor NAND ... |
4737 4738 |
Linux Support: ============== |
c609719b8 Initial revision |
4739 |
|
2729af9d5 * Fix minor NAND ... |
4740 4741 4742 |
Although U-Boot should support any OS or standalone application easily, the main focus has always been on Linux during the design of U-Boot. |
c609719b8 Initial revision |
4743 |
|
2729af9d5 * Fix minor NAND ... |
4744 4745 4746 4747 4748 |
U-Boot includes many features that so far have been part of some special "boot loader" code within the Linux kernel. Also, any "initrd" images to be used are no longer part of one big Linux image; instead, kernel and "initrd" are separate images. This implementation serves several purposes: |
c609719b8 Initial revision |
4749 |
|
2729af9d5 * Fix minor NAND ... |
4750 4751 4752 |
- the same features can be used for other OS or standalone applications (for instance: using compressed images to reduce the Flash memory footprint) |
c609719b8 Initial revision |
4753 |
|
2729af9d5 * Fix minor NAND ... |
4754 4755 |
- it becomes much easier to port new Linux kernel versions because lots of low-level, hardware dependent stuff are done by U-Boot |
c609719b8 Initial revision |
4756 |
|
2729af9d5 * Fix minor NAND ... |
4757 4758 4759 4760 4761 4762 |
- the same Linux kernel image can now be used with different "initrd" images; of course this also means that different kernel images can be run with the same "initrd". This makes testing easier (you don't have to build a new "zImage.initrd" Linux image when you just change a file in your "initrd"). Also, a field-upgrade of the software is easier now. |
c609719b8 Initial revision |
4763 |
|
c609719b8 Initial revision |
4764 |
|
2729af9d5 * Fix minor NAND ... |
4765 4766 |
Linux HOWTO: ============ |
c609719b8 Initial revision |
4767 |
|
2729af9d5 * Fix minor NAND ... |
4768 4769 |
Porting Linux to U-Boot based systems: --------------------------------------- |
c609719b8 Initial revision |
4770 |
|
2729af9d5 * Fix minor NAND ... |
4771 4772 4773 4774 |
U-Boot cannot save you from doing all the necessary modifications to configure the Linux device drivers for use with your target hardware (no, we don't intend to provide a full virtual machine interface to Linux :-). |
c609719b8 Initial revision |
4775 |
|
a47a12bec Move arch/ppc to ... |
4776 |
But now you can ignore ALL boot loader code (in arch/powerpc/mbxboot). |
24ee89b97 * Fix mdelay() on... |
4777 |
|
2729af9d5 * Fix minor NAND ... |
4778 4779 |
Just make sure your machine specific header file (for instance include/asm-ppc/tqm8xx.h) includes the same definition of the Board |
1dc306931 README: fix missi... |
4780 4781 |
Information structure as we define in include/asm-<arch>/u-boot.h, and make sure that your definition of IMAP_ADDR uses the same value |
6d0f6bcf3 rename CFG_ macro... |
4782 |
as your U-Boot configuration in CONFIG_SYS_IMMR. |
24ee89b97 * Fix mdelay() on... |
4783 |
|
c609719b8 Initial revision |
4784 |
|
2729af9d5 * Fix minor NAND ... |
4785 4786 |
Configuring the Linux kernel: ----------------------------- |
c609719b8 Initial revision |
4787 |
|
2729af9d5 * Fix minor NAND ... |
4788 4789 4790 4791 4792 4793 |
No specific requirements for U-Boot. Make sure you have some root device (initial ramdisk, NFS) for your target system. Building a Linux Image: ----------------------- |
c609719b8 Initial revision |
4794 |
|
2729af9d5 * Fix minor NAND ... |
4795 4796 4797 4798 4799 4800 4801 4802 4803 4804 4805 4806 4807 4808 4809 4810 4811 4812 4813 4814 4815 4816 4817 4818 4819 4820 4821 4822 4823 4824 4825 4826 4827 4828 4829 |
With U-Boot, "normal" build targets like "zImage" or "bzImage" are not used. If you use recent kernel source, a new build target "uImage" will exist which automatically builds an image usable by U-Boot. Most older kernels also have support for a "pImage" target, which was introduced for our predecessor project PPCBoot and uses a 100% compatible format. Example: make TQM850L_config make oldconfig make dep make uImage The "uImage" build target uses a special tool (in 'tools/mkimage') to encapsulate a compressed Linux kernel image with header information, CRC32 checksum etc. for use with U-Boot. This is what we are doing: * build a standard "vmlinux" kernel image (in ELF binary format): * convert the kernel into a raw binary image: ${CROSS_COMPILE}-objcopy -O binary \ -R .note -R .comment \ -S vmlinux linux.bin * compress the binary image: gzip -9 linux.bin * package compressed binary image for U-Boot: mkimage -A ppc -O linux -T kernel -C gzip \ -a 0 -e 0 -n "Linux Kernel Image" \ -d linux.bin.gz uImage |
c609719b8 Initial revision |
4830 |
|
c609719b8 Initial revision |
4831 |
|
2729af9d5 * Fix minor NAND ... |
4832 4833 4834 4835 4836 4837 4838 4839 4840 4841 4842 4843 4844 |
The "mkimage" tool can also be used to create ramdisk images for use with U-Boot, either separated from the Linux kernel image, or combined into one file. "mkimage" encapsulates the images with a 64 byte header containing information about target architecture, operating system, image type, compression method, entry points, time stamp, CRC32 checksums, etc. "mkimage" can be called in two ways: to verify existing images and print the header information, or to build new images. In the first form (with "-l" option) mkimage lists the information contained in the header of an existing U-Boot image; this includes checksum verification: |
c609719b8 Initial revision |
4845 |
|
2729af9d5 * Fix minor NAND ... |
4846 4847 4848 4849 4850 4851 4852 4853 4854 4855 4856 4857 4858 4859 4860 4861 |
tools/mkimage -l image -l ==> list image header information The second form (with "-d" option) is used to build a U-Boot image from a "data file" which is used as image payload: tools/mkimage -A arch -O os -T type -C comp -a addr -e ep \ -n name -d data_file image -A ==> set architecture to 'arch' -O ==> set operating system to 'os' -T ==> set image type to 'type' -C ==> set compression type 'comp' -a ==> set load address to 'addr' (hex) -e ==> set entry point to 'ep' (hex) -n ==> set image name to 'name' -d ==> use image data from 'datafile' |
694597912 Fix CONFIG_ETH*AD... |
4862 4863 4864 |
Right now, all Linux kernels for PowerPC systems use the same load address (0x00000000), but the entry point address depends on the kernel version: |
2729af9d5 * Fix minor NAND ... |
4865 4866 4867 4868 4869 4870 4871 4872 |
- 2.2.x kernels have the entry point at 0x0000000C, - 2.3.x and later kernels have the entry point at 0x00000000. So a typical call to build a U-Boot image would read: -> tools/mkimage -n '2.4.4 kernel for TQM850L' \ > -A ppc -O linux -T kernel -C gzip -a 0 -e 0 \ |
a47a12bec Move arch/ppc to ... |
4873 |
> -d /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/powerpc/coffboot/vmlinux.gz \ |
2729af9d5 * Fix minor NAND ... |
4874 4875 4876 4877 4878 4879 4880 4881 4882 4883 4884 4885 4886 4887 4888 4889 4890 4891 4892 4893 4894 4895 |
> examples/uImage.TQM850L Image Name: 2.4.4 kernel for TQM850L Created: Wed Jul 19 02:34:59 2000 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 335725 Bytes = 327.86 kB = 0.32 MB Load Address: 0x00000000 Entry Point: 0x00000000 To verify the contents of the image (or check for corruption): -> tools/mkimage -l examples/uImage.TQM850L Image Name: 2.4.4 kernel for TQM850L Created: Wed Jul 19 02:34:59 2000 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 335725 Bytes = 327.86 kB = 0.32 MB Load Address: 0x00000000 Entry Point: 0x00000000 NOTE: for embedded systems where boot time is critical you can trade speed for memory and install an UNCOMPRESSED image instead: this needs more space in Flash, but boots much faster since it does not need to be uncompressed: |
a47a12bec Move arch/ppc to ... |
4896 |
-> gunzip /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/powerpc/coffboot/vmlinux.gz |
2729af9d5 * Fix minor NAND ... |
4897 4898 |
-> tools/mkimage -n '2.4.4 kernel for TQM850L' \ > -A ppc -O linux -T kernel -C none -a 0 -e 0 \ |
a47a12bec Move arch/ppc to ... |
4899 |
> -d /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/powerpc/coffboot/vmlinux \ |
2729af9d5 * Fix minor NAND ... |
4900 4901 4902 4903 4904 4905 4906 4907 4908 4909 4910 4911 4912 4913 4914 4915 4916 4917 4918 4919 4920 |
> examples/uImage.TQM850L-uncompressed Image Name: 2.4.4 kernel for TQM850L Created: Wed Jul 19 02:34:59 2000 Image Type: PowerPC Linux Kernel Image (uncompressed) Data Size: 792160 Bytes = 773.59 kB = 0.76 MB Load Address: 0x00000000 Entry Point: 0x00000000 Similar you can build U-Boot images from a 'ramdisk.image.gz' file when your kernel is intended to use an initial ramdisk: -> tools/mkimage -n 'Simple Ramdisk Image' \ > -A ppc -O linux -T ramdisk -C gzip \ > -d /LinuxPPC/images/SIMPLE-ramdisk.image.gz examples/simple-initrd Image Name: Simple Ramdisk Image Created: Wed Jan 12 14:01:50 2000 Image Type: PowerPC Linux RAMDisk Image (gzip compressed) Data Size: 566530 Bytes = 553.25 kB = 0.54 MB Load Address: 0x00000000 Entry Point: 0x00000000 |
a804b5ce2 Add dumpimage, a ... |
4921 4922 4923 4924 4925 4926 4927 4928 |
The "dumpimage" is a tool to disassemble images built by mkimage. Its "-i" option performs the converse operation of the mkimage's second form (the "-d" option). Given an image built by mkimage, the dumpimage extracts a "data file" from the image: tools/dumpimage -i image -p position data_file -i ==> extract from the 'image' a specific 'data_file', \ indexed by 'position' |
2729af9d5 * Fix minor NAND ... |
4929 4930 4931 4932 4933 4934 4935 4936 4937 4938 4939 4940 4941 4942 4943 4944 4945 4946 4947 4948 4949 4950 4951 4952 4953 4954 4955 4956 4957 4958 4959 4960 4961 4962 4963 |
Installing a Linux Image: ------------------------- To downloading a U-Boot image over the serial (console) interface, you must convert the image to S-Record format: objcopy -I binary -O srec examples/image examples/image.srec The 'objcopy' does not understand the information in the U-Boot image header, so the resulting S-Record file will be relative to address 0x00000000. To load it to a given address, you need to specify the target address as 'offset' parameter with the 'loads' command. Example: install the image to address 0x40100000 (which on the TQM8xxL is in the first Flash bank): => erase 40100000 401FFFFF .......... done Erased 8 sectors => loads 40100000 ## Ready for S-Record download ... ~>examples/image.srec 1 2 3 4 5 6 7 8 9 10 11 12 13 ... ... 15989 15990 15991 15992 [file transfer complete] [connected] ## Start Addr = 0x00000000 You can check the success of the download using the 'iminfo' command; |
218ca724c README: update do... |
4964 |
this includes a checksum verification so you can be sure no data |
2729af9d5 * Fix minor NAND ... |
4965 4966 4967 4968 4969 4970 4971 4972 4973 4974 4975 4976 4977 4978 4979 4980 4981 4982 4983 4984 4985 4986 4987 4988 4989 4990 4991 4992 4993 4994 4995 4996 4997 4998 4999 5000 5001 5002 5003 5004 5005 5006 5007 5008 5009 5010 |
corruption happened: => imi 40100000 ## Checking Image at 40100000 ... Image Name: 2.2.13 for initrd on TQM850L Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 335725 Bytes = 327 kB = 0 MB Load Address: 00000000 Entry Point: 0000000c Verifying Checksum ... OK Boot Linux: ----------- The "bootm" command is used to boot an application that is stored in memory (RAM or Flash). In case of a Linux kernel image, the contents of the "bootargs" environment variable is passed to the kernel as parameters. You can check and modify this variable using the "printenv" and "setenv" commands: => printenv bootargs bootargs=root=/dev/ram => setenv bootargs root=/dev/nfs rw nfsroot=10.0.0.2:/LinuxPPC nfsaddrs=10.0.0.99:10.0.0.2 => printenv bootargs bootargs=root=/dev/nfs rw nfsroot=10.0.0.2:/LinuxPPC nfsaddrs=10.0.0.99:10.0.0.2 => bootm 40020000 ## Booting Linux kernel at 40020000 ... Image Name: 2.2.13 for NFS on TQM850L Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 381681 Bytes = 372 kB = 0 MB Load Address: 00000000 Entry Point: 0000000c Verifying Checksum ... OK Uncompressing Kernel Image ... OK Linux version 2.2.13 (wd@denx.local.net) (gcc version 2.95.2 19991024 (release)) #1 Wed Jul 19 02:35:17 MEST 2000 Boot arguments: root=/dev/nfs rw nfsroot=10.0.0.2:/LinuxPPC nfsaddrs=10.0.0.99:10.0.0.2 time_init: decrementer frequency = 187500000/60 Calibrating delay loop... 49.77 BogoMIPS Memory: 15208k available (700k kernel code, 444k data, 32k init) [c0000000,c1000000] ... |
11ccc33fa Many spelling fix... |
5011 |
If you want to boot a Linux kernel with initial RAM disk, you pass |
2729af9d5 * Fix minor NAND ... |
5012 5013 5014 5015 5016 5017 5018 5019 5020 5021 5022 5023 5024 5025 5026 5027 5028 5029 5030 5031 5032 5033 5034 5035 5036 5037 5038 5039 5040 5041 5042 5043 5044 5045 5046 5047 5048 5049 5050 5051 5052 5053 5054 5055 5056 5057 5058 |
the memory addresses of both the kernel and the initrd image (PPBCOOT format!) to the "bootm" command: => imi 40100000 40200000 ## Checking Image at 40100000 ... Image Name: 2.2.13 for initrd on TQM850L Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 335725 Bytes = 327 kB = 0 MB Load Address: 00000000 Entry Point: 0000000c Verifying Checksum ... OK ## Checking Image at 40200000 ... Image Name: Simple Ramdisk Image Image Type: PowerPC Linux RAMDisk Image (gzip compressed) Data Size: 566530 Bytes = 553 kB = 0 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK => bootm 40100000 40200000 ## Booting Linux kernel at 40100000 ... Image Name: 2.2.13 for initrd on TQM850L Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 335725 Bytes = 327 kB = 0 MB Load Address: 00000000 Entry Point: 0000000c Verifying Checksum ... OK Uncompressing Kernel Image ... OK ## Loading RAMDisk Image at 40200000 ... Image Name: Simple Ramdisk Image Image Type: PowerPC Linux RAMDisk Image (gzip compressed) Data Size: 566530 Bytes = 553 kB = 0 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Ramdisk ... OK Linux version 2.2.13 (wd@denx.local.net) (gcc version 2.95.2 19991024 (release)) #1 Wed Jul 19 02:32:08 MEST 2000 Boot arguments: root=/dev/ram time_init: decrementer frequency = 187500000/60 Calibrating delay loop... 49.77 BogoMIPS ... RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). bash# |
0267768ed * Modify bootm co... |
5059 5060 5061 5062 5063 5064 5065 5066 5067 5068 5069 5070 5071 5072 5073 5074 5075 5076 5077 5078 5079 5080 5081 5082 5083 5084 5085 5086 5087 5088 5089 5090 5091 5092 5093 5094 |
Boot Linux and pass a flat device tree: ----------- First, U-Boot must be compiled with the appropriate defines. See the section titled "Linux Kernel Interface" above for a more in depth explanation. The following is an example of how to start a kernel and pass an updated flat device tree: => print oftaddr oftaddr=0x300000 => print oft oft=oftrees/mpc8540ads.dtb => tftp $oftaddr $oft Speed: 1000, full duplex Using TSEC0 device TFTP from server 192.168.1.1; our IP address is 192.168.1.101 Filename 'oftrees/mpc8540ads.dtb'. Load address: 0x300000 Loading: # done Bytes transferred = 4106 (100a hex) => tftp $loadaddr $bootfile Speed: 1000, full duplex Using TSEC0 device TFTP from server 192.168.1.1; our IP address is 192.168.1.2 Filename 'uImage'. Load address: 0x200000 Loading:############ done Bytes transferred = 1029407 (fb51f hex) => print loadaddr loadaddr=200000 => print oftaddr oftaddr=0x300000 => bootm $loadaddr - $oftaddr ## Booting image at 00200000 ... |
a9398e018 Minor code cleanu... |
5095 5096 5097 |
Image Name: Linux-2.6.17-dirty Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 1029343 Bytes = 1005.2 kB |
0267768ed * Modify bootm co... |
5098 |
Load Address: 00000000 |
a9398e018 Minor code cleanu... |
5099 |
Entry Point: 00000000 |
0267768ed * Modify bootm co... |
5100 5101 5102 5103 5104 5105 |
Verifying Checksum ... OK Uncompressing Kernel Image ... OK Booting using flat device tree at 0x300000 Using MPC85xx ADS machine description Memory CAM mapping: CAM0=256Mb, CAM1=256Mb, CAM2=0Mb residual: 0Mb [snip] |
2729af9d5 * Fix minor NAND ... |
5106 5107 5108 5109 5110 5111 5112 5113 5114 5115 5116 5117 5118 5119 5120 5121 5122 5123 5124 5125 5126 5127 5128 5129 5130 5131 5132 5133 5134 5135 5136 5137 5138 5139 5140 5141 5142 5143 5144 |
More About U-Boot Image Types: ------------------------------ U-Boot supports the following image types: "Standalone Programs" are directly runnable in the environment provided by U-Boot; it is expected that (if they behave well) you can continue to work in U-Boot after return from the Standalone Program. "OS Kernel Images" are usually images of some Embedded OS which will take over control completely. Usually these programs will install their own set of exception handlers, device drivers, set up the MMU, etc. - this means, that you cannot expect to re-enter U-Boot except by resetting the CPU. "RAMDisk Images" are more or less just data blocks, and their parameters (address, size) are passed to an OS kernel that is being started. "Multi-File Images" contain several images, typically an OS (Linux) kernel image and one or more data images like RAMDisks. This construct is useful for instance when you want to boot over the network using BOOTP etc., where the boot server provides just a single image file, but you want to get for instance an OS kernel and a RAMDisk image. "Multi-File Images" start with a list of image sizes, each image size (in bytes) specified by an "uint32_t" in network byte order. This list is terminated by an "(uint32_t)0". Immediately after the terminating 0 follow the images, one by one, all aligned on "uint32_t" boundaries (size rounded up to a multiple of 4 bytes). "Firmware Images" are binary images containing firmware (like U-Boot or FPGA images) which usually will be programmed to flash memory. "Script files" are command sequences that will be executed by U-Boot's command interpreter; this feature is especially useful when you configure U-Boot to use a real shell (hush) as command interpreter. |
44f074c77 BOOT: Add "bootz"... |
5145 5146 5147 5148 5149 5150 |
Booting the Linux zImage: ------------------------- On some platforms, it's possible to boot Linux zImage. This is done using the "bootz" command. The syntax of "bootz" command is the same as the syntax of "bootm" command. |
8ac28563a README: Correct r... |
5151 |
Note, defining the CONFIG_SUPPORT_RAW_INITRD allows user to supply |
017e1f3f9 BOOT: Add RAW ram... |
5152 5153 5154 |
kernel with raw initrd images. The syntax is slightly different, the address of the initrd must be augmented by it's size, in the following format: "<initrd addres>:<initrd size>". |
2729af9d5 * Fix minor NAND ... |
5155 5156 5157 5158 5159 5160 5161 5162 5163 5164 5165 5166 5167 5168 5169 5170 5171 5172 5173 5174 5175 5176 5177 5178 5179 5180 5181 5182 5183 5184 5185 5186 5187 5188 5189 5190 5191 5192 5193 5194 5195 5196 5197 5198 5199 5200 5201 5202 5203 5204 5205 5206 5207 5208 5209 5210 5211 5212 5213 5214 5215 5216 5217 5218 5219 5220 5221 5222 5223 5224 5225 5226 5227 5228 5229 5230 5231 5232 5233 5234 5235 5236 5237 5238 5239 5240 5241 5242 5243 5244 5245 5246 5247 5248 5249 5250 5251 |
Standalone HOWTO: ================= One of the features of U-Boot is that you can dynamically load and run "standalone" applications, which can use some resources of U-Boot like console I/O functions or interrupt services. Two simple examples are included with the sources: "Hello World" Demo: ------------------- 'examples/hello_world.c' contains a small "Hello World" Demo application; it is automatically compiled when you build U-Boot. It's configured to run at address 0x00040004, so you can play with it like that: => loads ## Ready for S-Record download ... ~>examples/hello_world.srec 1 2 3 4 5 6 7 8 9 10 11 ... [file transfer complete] [connected] ## Start Addr = 0x00040004 => go 40004 Hello World! This is a test. ## Starting application at 0x00040004 ... Hello World argc = 7 argv[0] = "40004" argv[1] = "Hello" argv[2] = "World!" argv[3] = "This" argv[4] = "is" argv[5] = "a" argv[6] = "test." argv[7] = "<NULL>" Hit any key to exit ... ## Application terminated, rc = 0x0 Another example, which demonstrates how to register a CPM interrupt handler with the U-Boot code, can be found in 'examples/timer.c'. Here, a CPM timer is set up to generate an interrupt every second. The interrupt service routine is trivial, just printing a '.' character, but this is just a demo program. The application can be controlled by the following keys: ? - print current values og the CPM Timer registers b - enable interrupts and start timer e - stop timer and disable interrupts q - quit application => loads ## Ready for S-Record download ... ~>examples/timer.srec 1 2 3 4 5 6 7 8 9 10 11 ... [file transfer complete] [connected] ## Start Addr = 0x00040004 => go 40004 ## Starting application at 0x00040004 ... TIMERS=0xfff00980 Using timer 1 tgcr @ 0xfff00980, tmr @ 0xfff00990, trr @ 0xfff00994, tcr @ 0xfff00998, tcn @ 0xfff0099c, ter @ 0xfff009b0 Hit 'b': [q, b, e, ?] Set interval 1000000 us Enabling timer Hit '?': [q, b, e, ?] ........ tgcr=0x1, tmr=0xff1c, trr=0x3d09, tcr=0x0, tcn=0xef6, ter=0x0 Hit '?': [q, b, e, ?] . tgcr=0x1, tmr=0xff1c, trr=0x3d09, tcr=0x0, tcn=0x2ad4, ter=0x0 Hit '?': [q, b, e, ?] . tgcr=0x1, tmr=0xff1c, trr=0x3d09, tcr=0x0, tcn=0x1efc, ter=0x0 Hit '?': [q, b, e, ?] . tgcr=0x1, tmr=0xff1c, trr=0x3d09, tcr=0x0, tcn=0x169d, ter=0x0 Hit 'e': [q, b, e, ?] ...Stopping timer Hit 'q': [q, b, e, ?] ## Application terminated, rc = 0x0 Minicom warning: ================ Over time, many people have reported problems when trying to use the "minicom" terminal emulation program for serial download. I (wd) consider minicom to be broken, and recommend not to use it. Under Unix, I recommend to use C-Kermit for general purpose use (and especially for kermit binary protocol download ("loadb" command), and |
e53515a21 README: Add handy... |
5252 5253 5254 |
use "cu" for S-Record download ("loads" command). See http://www.denx.de/wiki/view/DULG/SystemSetup#Section_4.3. for help with kermit. |
2729af9d5 * Fix minor NAND ... |
5255 5256 5257 5258 5259 5260 5261 5262 5263 5264 5265 5266 5267 5268 5269 5270 5271 5272 5273 5274 5275 5276 5277 5278 5279 5280 5281 5282 5283 5284 5285 5286 5287 5288 5289 |
Nevertheless, if you absolutely want to use it try adding this configuration to your "File transfer protocols" section: Name Program Name U/D FullScr IO-Red. Multi X kermit /usr/bin/kermit -i -l %l -s Y U Y N N Y kermit /usr/bin/kermit -i -l %l -r N D Y N N NetBSD Notes: ============= Starting at version 0.9.2, U-Boot supports NetBSD both as host (build U-Boot) and target system (boots NetBSD/mpc8xx). Building requires a cross environment; it is known to work on NetBSD/i386 with the cross-powerpc-netbsd-1.3 package (you will also need gmake since the Makefiles are not compatible with BSD make). Note that the cross-powerpc package does not install include files; attempting to build U-Boot will fail because <machine/ansi.h> is missing. This file has to be installed and patched manually: # cd /usr/pkg/cross/powerpc-netbsd/include # mkdir powerpc # ln -s powerpc machine # cp /usr/src/sys/arch/powerpc/include/ansi.h powerpc/ansi.h # ${EDIT} powerpc/ansi.h ## must remove __va_list, _BSD_VA_LIST Native builds *don't* work due to incompatibilities between native and U-Boot include files. Booting assumes that (the first part of) the image booted is a stage-2 loader which in turn loads and then invokes the kernel proper. Loader sources will eventually appear in the NetBSD source tree (probably in sys/arc/mpc8xx/stand/u-boot_stage2/); in the |
2a8af1873 * Fixes for TQM85... |
5290 |
meantime, see ftp://ftp.denx.de/pub/u-boot/ppcboot_stage2.tar.gz |
2729af9d5 * Fix minor NAND ... |
5291 5292 5293 5294 5295 5296 5297 5298 5299 5300 5301 5302 5303 5304 5305 5306 5307 5308 5309 5310 5311 5312 5313 5314 |
Implementation Internals: ========================= The following is not intended to be a complete description of every implementation detail. However, it should help to understand the inner workings of U-Boot and make it easier to port it to custom hardware. Initial Stack, Global Data: --------------------------- The implementation of U-Boot is complicated by the fact that U-Boot starts running out of ROM (flash memory), usually without access to system RAM (because the memory controller is not initialized yet). This means that we don't have writable Data or BSS segments, and BSS is not initialized as zero. To be able to get a C environment working at all, we have to allocate at least a minimal stack. Implementation options for this are defined and restricted by the CPU used: Some CPU models provide on-chip memory (like the IMMR area on MPC8xx and MPC826x processors), on others (parts of) the data cache can be locked as (mis-) used as memory, etc. |
218ca724c README: update do... |
5315 |
Chris Hallinan posted a good summary of these issues to the |
0668236ba README: update ma... |
5316 |
U-Boot mailing list: |
2729af9d5 * Fix minor NAND ... |
5317 5318 5319 5320 5321 5322 5323 5324 5325 5326 5327 |
Subject: RE: [U-Boot-Users] RE: More On Memory Bank x (nothingness)? From: "Chris Hallinan" <clh@net1plus.com> Date: Mon, 10 Feb 2003 16:43:46 -0500 (22:43 MET) ... Correct me if I'm wrong, folks, but the way I understand it is this: Using DCACHE as initial RAM for Stack, etc, does not require any physical RAM backing up the cache. The cleverness is that the cache is being used as a temporary supply of necessary storage before the SDRAM controller is setup. It's |
11ccc33fa Many spelling fix... |
5328 |
beyond the scope of this list to explain the details, but you |
2729af9d5 * Fix minor NAND ... |
5329 5330 5331 5332 5333 |
can see how this works by studying the cache architecture and operation in the architecture and processor-specific manuals. OCM is On Chip Memory, which I believe the 405GP has 4K. It is another option for the system designer to use as an |
11ccc33fa Many spelling fix... |
5334 |
initial stack/RAM area prior to SDRAM being available. Either |
2729af9d5 * Fix minor NAND ... |
5335 5336 5337 5338 |
option should work for you. Using CS 4 should be fine if your board designers haven't used it for something that would cause you grief during the initial boot! It is frequently not used. |
6d0f6bcf3 rename CFG_ macro... |
5339 |
CONFIG_SYS_INIT_RAM_ADDR should be somewhere that won't interfere |
2729af9d5 * Fix minor NAND ... |
5340 5341 |
with your processor/board/system design. The default value you will find in any recent u-boot distribution in |
8a316c9b6 Major cleanup for... |
5342 |
walnut.h should work for you. I'd set it to a value larger |
2729af9d5 * Fix minor NAND ... |
5343 5344 5345 5346 5347 5348 5349 5350 5351 5352 5353 5354 5355 5356 |
than your SDRAM module. If you have a 64MB SDRAM module, set it above 400_0000. Just make sure your board has no resources that are supposed to respond to that address! That code in start.S has been around a while and should work as is when you get the config right. -Chris Hallinan DS4.COM, Inc. It is essential to remember this, since it has some impact on the C code for the initialization procedures: * Initialized global data (data segment) is read-only. Do not attempt to write it. |
11ccc33fa Many spelling fix... |
5357 |
* Do not use any uninitialized global data (or implicitely initialized |
2729af9d5 * Fix minor NAND ... |
5358 5359 5360 5361 5362 5363 5364 5365 5366 5367 5368 5369 5370 5371 5372 5373 5374 5375 5376 5377 5378 5379 |
as zero data - BSS segment) at all - this is undefined, initiali- zation is performed later (when relocating to RAM). * Stack space is very limited. Avoid big data buffers or things like that. Having only the stack as writable memory limits means we cannot use normal global data to share information beween the code. But it turned out that the implementation of U-Boot can be greatly simplified by making a global data structure (gd_t) available to all functions. We could pass a pointer to this data as argument to _all_ functions, but this would bloat the code. Instead we use a feature of the GCC compiler (Global Register Variables) to share the data: we place a pointer (gd) to the global data into a register which we reserve for this purpose. When choosing a register for such a purpose we are restricted by the relevant (E)ABI specifications for the current architecture, and by GCC's implementation. For PowerPC, the following registers have specific use: R1: stack pointer |
e7670f6c1 PPC: Use r2 inste... |
5380 |
R2: reserved for system use |
2729af9d5 * Fix minor NAND ... |
5381 5382 5383 5384 5385 |
R3-R4: parameter passing and return values R5-R10: parameter passing R13: small data area pointer R30: GOT pointer R31: frame pointer |
e6bee8081 ppc: Update READM... |
5386 5387 5388 |
(U-Boot also uses R12 as internal GOT pointer. r12 is a volatile register so r12 needs to be reset when going back and forth between asm and C) |
2729af9d5 * Fix minor NAND ... |
5389 |
|
e7670f6c1 PPC: Use r2 inste... |
5390 |
==> U-Boot will use R2 to hold a pointer to the global data |
2729af9d5 * Fix minor NAND ... |
5391 5392 5393 5394 5395 5396 5397 |
Note: on PPC, we could use a static initializer (since the address of the global data structure is known at compile time), but it turned out that reserving a register results in somewhat smaller code - although the code savings are not that big (on average for all boards 752 bytes for the whole U-Boot image, 624 text + 127 data). |
c4db335c2 Blackfin: change ... |
5398 |
On Blackfin, the normal C ABI (except for P3) is followed as documented here: |
4c58eb555 add some more Bla... |
5399 |
http://docs.blackfin.uclinux.org/doku.php?id=application_binary_interface |
c4db335c2 Blackfin: change ... |
5400 |
==> U-Boot will use P3 to hold a pointer to the global data |
4c58eb555 add some more Bla... |
5401 |
|
2729af9d5 * Fix minor NAND ... |
5402 5403 5404 5405 |
On ARM, the following registers are used: R0: function argument word/integer result R1-R3: function argument word |
12eba1b49 README: update AR... |
5406 5407 |
R9: platform specific R10: stack limit (used only if stack checking is enabled) |
2729af9d5 * Fix minor NAND ... |
5408 5409 5410 5411 5412 |
R11: argument (frame) pointer R12: temporary workspace R13: stack pointer R14: link register R15: program counter |
12eba1b49 README: update AR... |
5413 5414 5415 |
==> U-Boot will use R9 to hold a pointer to the global data Note: on ARM, only R_ARM_RELATIVE relocations are supported. |
2729af9d5 * Fix minor NAND ... |
5416 |
|
0df01fd3d nios2: fix r15 is... |
5417 5418 5419 5420 5421 5422 5423 |
On Nios II, the ABI is documented here: http://www.altera.com/literature/hb/nios2/n2cpu_nii51016.pdf ==> U-Boot will use gp to hold a pointer to the global data Note: on Nios II, we give "-G0" option to gcc and don't use gp to access small data sections, so gp is free. |
afc1ce828 doc/README: docum... |
5424 5425 5426 5427 5428 5429 5430 5431 5432 5433 5434 5435 5436 |
On NDS32, the following registers are used: R0-R1: argument/return R2-R5: argument R15: temporary register for assembler R16: trampoline register R28: frame pointer (FP) R29: global pointer (GP) R30: link register (LP) R31: stack pointer (SP) PC: program counter (PC) ==> U-Boot will use R10 to hold a pointer to the global data |
d87080b72 GCC-4.x fixes: cl... |
5437 5438 |
NOTE: DECLARE_GLOBAL_DATA_PTR must be used with file-global scope, or current versions of GCC may "optimize" the code too much. |
2729af9d5 * Fix minor NAND ... |
5439 5440 5441 5442 5443 5444 5445 5446 5447 5448 5449 5450 5451 5452 5453 5454 |
Memory Management: ------------------ U-Boot runs in system state and uses physical addresses, i.e. the MMU is not used either for address mapping nor for memory protection. The available memory is mapped to fixed addresses using the memory controller. In this process, a contiguous block is formed for each memory type (Flash, SDRAM, SRAM), even when it consists of several physical memory banks. U-Boot is installed in the first 128 kB of the first Flash bank (on TQM8xxL modules this is the range 0x40000000 ... 0x4001FFFF). After booting and sizing and initializing DRAM, the code relocates itself to the upper end of DRAM. Immediately below the U-Boot code some |
6d0f6bcf3 rename CFG_ macro... |
5455 |
memory is reserved for use by malloc() [see CONFIG_SYS_MALLOC_LEN |
2729af9d5 * Fix minor NAND ... |
5456 5457 5458 5459 5460 5461 5462 5463 5464 5465 5466 5467 5468 5469 5470 5471 5472 5473 5474 5475 5476 5477 5478 5479 5480 5481 5482 5483 5484 5485 5486 |
configuration setting]. Below that, a structure with global Board Info data is placed, followed by the stack (growing downward). Additionally, some exception handler code is copied to the low 8 kB of DRAM (0x00000000 ... 0x00001FFF). So a typical memory configuration with 16 MB of DRAM could look like this: 0x0000 0000 Exception Vector code : 0x0000 1FFF 0x0000 2000 Free for Application Use : : : : 0x00FB FF20 Monitor Stack (Growing downward) 0x00FB FFAC Board Info Data and permanent copy of global data 0x00FC 0000 Malloc Arena : 0x00FD FFFF 0x00FE 0000 RAM Copy of Monitor Code ... eventually: LCD or video framebuffer ... eventually: pRAM (Protected RAM - unchanged by reset) 0x00FF FFFF [End of RAM] System Initialization: ---------------------- |
c609719b8 Initial revision |
5487 |
|
2729af9d5 * Fix minor NAND ... |
5488 |
In the reset configuration, U-Boot starts at the reset entry point |
11ccc33fa Many spelling fix... |
5489 |
(on most PowerPC systems at address 0x00000100). Because of the reset |
2729af9d5 * Fix minor NAND ... |
5490 5491 5492 5493 5494 5495 5496 5497 5498 5499 5500 5501 5502 5503 5504 5505 5506 5507 5508 5509 5510 5511 5512 5513 5514 5515 5516 5517 5518 5519 5520 5521 5522 5523 5524 |
configuration for CS0# this is a mirror of the onboard Flash memory. To be able to re-map memory U-Boot then jumps to its link address. To be able to implement the initialization code in C, a (small!) initial stack is set up in the internal Dual Ported RAM (in case CPUs which provide such a feature like MPC8xx or MPC8260), or in a locked part of the data cache. After that, U-Boot initializes the CPU core, the caches and the SIU. Next, all (potentially) available memory banks are mapped using a preliminary mapping. For example, we put them on 512 MB boundaries (multiples of 0x20000000: SDRAM on 0x00000000 and 0x20000000, Flash on 0x40000000 and 0x60000000, SRAM on 0x80000000). Then UPM A is programmed for SDRAM access. Using the temporary configuration, a simple memory test is run that determines the size of the SDRAM banks. When there is more than one SDRAM bank, and the banks are of different size, the largest is mapped first. For equal size, the first bank (CS2#) is mapped first. The first mapping is always for address 0x00000000, with any additional banks following immediately to create contiguous memory starting from 0. Then, the monitor installs itself at the upper end of the SDRAM area and allocates memory for use by malloc() and for the global Board Info data; also, the exception vector code is copied to the low RAM pages, and the final stack is set up. Only after this relocation will you have a "normal" C environment; until that you are restricted in several ways, mostly because you are running from ROM, and because the code will have to be relocated to a new address in RAM. U-Boot Porting Guide: ---------------------- |
c609719b8 Initial revision |
5525 |
|
2729af9d5 * Fix minor NAND ... |
5526 5527 |
[Based on messages by Jerry Van Baren in the U-Boot-Users mailing list, October 2002] |
c609719b8 Initial revision |
5528 |
|
6c3fef28b Improve U-Boot Po... |
5529 |
int main(int argc, char *argv[]) |
2729af9d5 * Fix minor NAND ... |
5530 5531 |
{ sighandler_t no_more_time; |
c609719b8 Initial revision |
5532 |
|
6c3fef28b Improve U-Boot Po... |
5533 5534 |
signal(SIGALRM, no_more_time); alarm(PROJECT_DEADLINE - toSec (3 * WEEK)); |
c609719b8 Initial revision |
5535 |
|
2729af9d5 * Fix minor NAND ... |
5536 |
if (available_money > available_manpower) { |
6c3fef28b Improve U-Boot Po... |
5537 |
Pay consultant to port U-Boot; |
c609719b8 Initial revision |
5538 5539 |
return 0; } |
2729af9d5 * Fix minor NAND ... |
5540 |
Download latest U-Boot source; |
0668236ba README: update ma... |
5541 |
Subscribe to u-boot mailing list; |
2729af9d5 * Fix minor NAND ... |
5542 |
|
6c3fef28b Improve U-Boot Po... |
5543 5544 |
if (clueless) email("Hi, I am new to U-Boot, how do I get started?"); |
2729af9d5 * Fix minor NAND ... |
5545 5546 5547 |
while (learning) { Read the README file in the top level directory; |
6c3fef28b Improve U-Boot Po... |
5548 5549 |
Read http://www.denx.de/twiki/bin/view/DULG/Manual; Read applicable doc/*.README; |
2729af9d5 * Fix minor NAND ... |
5550 |
Read the source, Luke; |
6c3fef28b Improve U-Boot Po... |
5551 |
/* find . -name "*.[chS]" | xargs grep -i <keyword> */ |
2729af9d5 * Fix minor NAND ... |
5552 |
} |
6c3fef28b Improve U-Boot Po... |
5553 5554 5555 |
if (available_money > toLocalCurrency ($2500)) Buy a BDI3000; else |
2729af9d5 * Fix minor NAND ... |
5556 |
Add a lot of aggravation and time; |
2729af9d5 * Fix minor NAND ... |
5557 |
|
6c3fef28b Improve U-Boot Po... |
5558 5559 5560 5561 5562 5563 5564 5565 5566 5567 5568 5569 5570 5571 5572 5573 5574 5575 5576 5577 5578 5579 5580 5581 |
if (a similar board exists) { /* hopefully... */ cp -a board/<similar> board/<myboard> cp include/configs/<similar>.h include/configs/<myboard>.h } else { Create your own board support subdirectory; Create your own board include/configs/<myboard>.h file; } Edit new board/<myboard> files Edit new include/configs/<myboard>.h while (!accepted) { while (!running) { do { Add / modify source code; } until (compiles); Debug; if (clueless) email("Hi, I am having problems..."); } Send patch file to the U-Boot email list; if (reasonable critiques) Incorporate improvements from email list code review; else Defend code as written; |
2729af9d5 * Fix minor NAND ... |
5582 |
} |
2729af9d5 * Fix minor NAND ... |
5583 5584 5585 5586 5587 5588 5589 5590 |
return 0; } void no_more_time (int sig) { hire_a_guru(); } |
c609719b8 Initial revision |
5591 |
|
2729af9d5 * Fix minor NAND ... |
5592 5593 |
Coding Standards: ----------------- |
c609719b8 Initial revision |
5594 |
|
2729af9d5 * Fix minor NAND ... |
5595 |
All contributions to U-Boot should conform to the Linux kernel |
2c0516517 Added changelog e... |
5596 |
coding style; see the file "Documentation/CodingStyle" and the script |
7ca9296e1 README: udate Cod... |
5597 |
"scripts/Lindent" in your Linux kernel source directory. |
2c0516517 Added changelog e... |
5598 5599 5600 5601 5602 5603 5604 5605 5606 |
Source files originating from a different project (for example the MTD subsystem) are generally exempt from these guidelines and are not reformated to ease subsequent migration to newer versions of those sources. Please note that U-Boot is implemented in C (and to some small parts in Assembler); no C++ is used, so please do not use C++ style comments (//) in your code. |
c609719b8 Initial revision |
5607 |
|
2729af9d5 * Fix minor NAND ... |
5608 5609 |
Please also stick to the following formatting rules: - remove any trailing white space |
7ca9296e1 README: udate Cod... |
5610 |
- use TAB characters for indentation and vertical alignment, not spaces |
2729af9d5 * Fix minor NAND ... |
5611 5612 |
- make sure NOT to use DOS '\r ' line feeds |
7ca9296e1 README: udate Cod... |
5613 |
- do not add more than 2 consecutive empty lines to source files |
2729af9d5 * Fix minor NAND ... |
5614 |
- do not add trailing empty lines to source files |
180d3f74e * Fix problems ca... |
5615 |
|
2729af9d5 * Fix minor NAND ... |
5616 5617 |
Submissions which do not conform to the standards may be returned with a request to reformat the changes. |
c609719b8 Initial revision |
5618 |
|
2729af9d5 * Fix minor NAND ... |
5619 5620 |
Submitting Patches: ------------------- |
c609719b8 Initial revision |
5621 |
|
2729af9d5 * Fix minor NAND ... |
5622 5623 5624 |
Since the number of patches for U-Boot is growing, we need to establish some rules. Submissions which do not conform to these rules may be rejected, even when they contain important and valuable stuff. |
c609719b8 Initial revision |
5625 |
|
0d28f34bb Update the U-Boot... |
5626 |
Please see http://www.denx.de/wiki/U-Boot/Patches for details. |
218ca724c README: update do... |
5627 |
|
0668236ba README: update ma... |
5628 5629 |
Patches shall be sent to the u-boot mailing list <u-boot@lists.denx.de>; see http://lists.denx.de/mailman/listinfo/u-boot |
2729af9d5 * Fix minor NAND ... |
5630 5631 |
When you send a patch, please include the following information with it: |
c609719b8 Initial revision |
5632 |
|
2729af9d5 * Fix minor NAND ... |
5633 5634 5635 |
* For bug fixes: a description of the bug and how your patch fixes this bug. Please try to include a way of demonstrating that the patch actually fixes something. |
c609719b8 Initial revision |
5636 |
|
2729af9d5 * Fix minor NAND ... |
5637 5638 |
* For new features: a description of the feature and your implementation. |
c609719b8 Initial revision |
5639 |
|
2729af9d5 * Fix minor NAND ... |
5640 |
* A CHANGELOG entry as plaintext (separate from the patch) |
c609719b8 Initial revision |
5641 |
|
2729af9d5 * Fix minor NAND ... |
5642 |
* For major contributions, your entry to the CREDITS file |
c609719b8 Initial revision |
5643 |
|
27af930e9 Merge and reforma... |
5644 5645 |
* When you add support for a new board, don't forget to add a maintainer e-mail address to the boards.cfg file, too. |
c609719b8 Initial revision |
5646 |
|
2729af9d5 * Fix minor NAND ... |
5647 5648 |
* If your patch adds new configuration options, don't forget to document these in the README file. |
c609719b8 Initial revision |
5649 |
|
218ca724c README: update do... |
5650 5651 |
* The patch itself. If you are using git (which is *strongly* recommended) you can easily generate the patch using the |
7ca9296e1 README: udate Cod... |
5652 |
"git format-patch". If you then use "git send-email" to send it to |
218ca724c README: update do... |
5653 5654 5655 5656 5657 5658 |
the U-Boot mailing list, you will avoid most of the common problems with some other mail clients. If you cannot use git, use "diff -purN OLD NEW". If your version of diff does not support these options, then get the latest version of GNU diff. |
c609719b8 Initial revision |
5659 |
|
218ca724c README: update do... |
5660 5661 5662 5663 |
The current directory when running this command shall be the parent directory of the U-Boot source tree (i. e. please make sure that your patch includes sufficient directory information for the affected files). |
6dff55297 * Patches by Mart... |
5664 |
|
218ca724c README: update do... |
5665 5666 |
We prefer patches as plain text. MIME attachments are discouraged, and compressed attachments must not be used. |
c609719b8 Initial revision |
5667 |
|
2729af9d5 * Fix minor NAND ... |
5668 5669 |
* If one logical set of modifications affects or creates several files, all these changes shall be submitted in a SINGLE patch file. |
52f52c149 Patches by Robert... |
5670 |
|
2729af9d5 * Fix minor NAND ... |
5671 5672 |
* Changesets that contain different, unrelated modifications shall be submitted as SEPARATE patches, one patch per changeset. |
8bde7f776 * Code cleanup: |
5673 |
|
52f52c149 Patches by Robert... |
5674 |
|
2729af9d5 * Fix minor NAND ... |
5675 |
Notes: |
c609719b8 Initial revision |
5676 |
|
2729af9d5 * Fix minor NAND ... |
5677 5678 5679 |
* Before sending the patch, run the MAKEALL script on your patched source tree and make sure that no errors or warnings are reported for any of the boards. |
c609719b8 Initial revision |
5680 |
|
2729af9d5 * Fix minor NAND ... |
5681 5682 5683 |
* Keep your modifications to the necessary minimum: A patch containing several unrelated changes or arbitrary reformats will be returned with a request to re-formatting / split it. |
c609719b8 Initial revision |
5684 |
|
2729af9d5 * Fix minor NAND ... |
5685 5686 5687 5688 5689 5690 |
* If you modify existing code, make sure that your new code does not add to the memory footprint of the code ;-) Small is beautiful! When adding new features, these should compile conditionally only (using #ifdef), and the resulting code with the new feature disabled must not need more memory than the old code without your modification. |
90dc67049 README: add expla... |
5691 |
|
0668236ba README: update ma... |
5692 5693 5694 5695 |
* Remember that there is a size limit of 100 kB per message on the u-boot mailing list. Bigger patches will be moderated. If they are reasonable and not too big, they will be acknowledged. But patches bigger than the size limit should be avoided. |